Meeting Pearls 2/Meeting Pearls Vol. II (1995)(GTI - Schatztruhe)[!].iso/Pearls/comm/term/term.doc

Text File | 1994-11-30 | 271KB | 6,789 lines

   `term' 4.2 - A terminal program for Amiga computers

   Copyright © 1990-1994 Olaf Barthel

   You may make and distribute verbatim copies of this documentation if
the contents are unchanged or the author has agreed to any changes made.

   No guarantee of any kind is given that the program described in this
document are 100% reliable. You are using this material on your own
risk.

   The program `term' and the data received/sent by it must not be used
for the following purposes:

  1. The construction, development, production or testing of weapons or
     weapon systems of any kind.

  2. The construction, development, production or use of
     plants/installations which include the processing of
     radioactive/fissionable material.

  3. The training of persons to deal with the abovesaid actions.


   Listen to your conscience.

   `Installer' copyright and license notice:

   Installer 1.24 and Installer project icon © Copyright 1991-93
Commodore-Amiga, Inc.  All Rights Reserved.  Reproduced and distributed
under license from Commodore.

   INSTALLER SOFTWARE IS PROVIDED "AS-IS" AND SUBJECT TO CHANGE; NO
WARRANTIES ARE MADE. ALL USE IS AT YOUR OWN RISK. NO LIABILITY OR
RESPONSIBILITY IS ASSUMED.

Introduction
************

   `term' is a telecommuncations program designed for use with any
Commodore-Amiga computer running Kickstart 2.04 or higher. Its features
include

   * Fast built-in VT-220 terminal emulation

   * Support for custom terminal emulation modules following the `XEM
     2.0' standard

   * Operates in any display environment, supports all screen display
     modes

   * Support for file transfer modules following the `XPR' standard

   * File- and printer-capturing functions

   * Review-buffer support

   * Powerful phonebook and dialing functions

   * `Amiga User Interface Style Guide' conformant user interface

   * Online-help (requires AmigaGuide package)

   * Built-in `ARexx' interface

   * File upload list, which permits selecting the files to be
     transferred before the upload is started.

   * Login script learn mode.

   * Built-in keyword/response parser which makes it possible to have
     `term' respond to BBS prompts and such with the user name,
     password, etc. without having to program the ARexx interface.

   * Interface for external programs to rendezvous with `term', taking
     over serial I/O processing (such as `HydraCom').

   Although this program is freely-distributable, it is not entirely
free.  If you like it and use frequently, you are requested to send the
author a donation which you suppose will do as a payment for the
program.  See the chapter registration (see Registration) for details.

   Admittedly, `term' is a fairly large program which consumes quite an
amount of memory when running. You need to have at least 2 MBytes of
system memory installed if you wish to run the program. Please note
that this is the bare minimum configuration. It is recommended that you
run `term' on a faster machine, i.e. plain MC68000-driven Amigas will
have trouble running the program.

Registration
************

   `term' is made available under the concept of Gift-Ware, which is a
variant of Share-Ware. Share-Ware software authors often release
`crippled' versions of their products, i.e. these programs do not
support the same functionality as the registered versions you get when
sending monetary contributions to the authors. It all comes down to
`pay for the software you are using' in Share-Ware terms. With
Gift-Ware registration is different, you are not required to contribute
money, but a gift will do. With `term' you always get a fully
functional program, there is no `crippled' test release which you can
try for a limited time and then have to pay for in order to receive the
working registered version.

   It may seem as if `term' was free, but this is not the case.
Although there is no need to pay the author in order to get a fully
functional version of the program you should consider making a
contribution. You don't need to feel guilty if you cannot or do not
want to give me something in return for the work I have put into
`term'. Show me that it was worth spending so much time listening to
users, updating, rewriting and enhancing this program. Your
contributions will provide the motivation for me to keep developing the
program.

   The preferred method of `payment' would be to order the `Olsen
Collection' CD-ROM. This CD contains almost every program I have
written for the Amiga. The CD will be available in August 1994 and can
be bought for US$ 35 directly from me or from your local software
distributor.

   If you don't have any CD-ROM drive or just don't want to buy the CD,
here is a list of suggested contributions:

   * Infocom games and Infocom hintbooks. Although I already own almost
     all games published in `The Lost Treasures of Infocom vol I+II' I
     still collect the originals (not those super-cheap Virgin Software
     re-releases). With the exception of `A Mind forever voyaging',
     `Arthur', `Hollywood Hijinx', `Infidel', `Leather Goddesses of
     Phobos', `Nord and Bert couldn't make head or tail of it',
     `Plundered Hearts', `Shogun', `Spellbreaker', `Suspect', `The
     Lurking Horror', `Trinity', `Wishbringer', `Zork I', `Zork Zero'
     (which I already own) I welcome any game in any format - it does
     not necessarily have to be an Amiga game, Apple II, Kaypro,
     Atari-XL, C64, etc. will be fine, too.

   * The films `Jabberwocky', `Brazil', `The Fisher King', `Time
     Bandits', `Annie Hall', `Zelig', `Alien', `Indiana Jones I-III' or
     `Lawrence of Arabia' on a PAL-VHS video cassette

   * A CD by the Beatles (except for `Help', `Rubber Soul', `Revolver',
     `Sgt. Pepper's Lonely Hearts Club Band', `The white album',
     `Magical Mystery Tour', `Abbey Road', `Let it be' and `Past
     Masters, Volume II'), Little Feat (-1989), Weather Report, Paul
     Simon (1971-1985), Eric Clapton (-1985), Peter Gabriel (1977-1989)
     or Daniel Lanois

   * A book by Michael Crichton, Bruce Chatwin, Raymond Chandler, Terry
     Pratchett or Steven Meretzky

   * Old CinemaWare games - with the exception of `Defender of the
     Crown', `The King of Chicago', `The Three Stooges', `Sinbad', `It
     came from the desert', `Lords of the Rising Sun', `TV-Sports
     Basketball' and `TV-Sports Football'

   * An old game by Activision (`Hacker II', `Portal', `Shanghai',
     `Tass Times in Tonetown'), Electronic Arts (`Marble Madness',
     `Skyfox', `The Bard's Tale') or Epyx (`Temple of Apshai', `Rogue')

   * An old Rainbird game (`Starglider', `Jewels of Darkness')

   * An old Telarium/Trillium game for the C64 on 5.25" floppy disk
     (such as `The Amazon', `Rendezvous with Rama', `Fahrenheit 451').

   * An old Lucasfilm game for the C64 on 5.25" floppy disk (such as
     `Rescue on Fractalus', `Ballblazer', `Koronis Rift', `The
     Eidolon').

   * Scenery disks for the SubLogic Flight-Simulator II - except for
     `Western European Tour', `Japan', `USA #7', `USA #9' and `USA #14'.

   * CD-ROMs

   * Cash and checks (no credit cards - sorry) are always welcome.

   Send your contribution to the following address:

                             Olaf Barthel
                           Brabeckstrasse 35
                           D-30559 Hannover

                      Federal Republic of Germany

   If you wish to be notified when program updates become available or
wish to order the next update as it becomes available you must include
enough money to cover my expenses, see the chapter entitled orders (see
Orders) for more information.

Commercial distribution
***********************

   I don't mind if you make a copy of `term' for a customer who is
looking for a decent terminal program. But if you decide to distribute
the program on a larger scale, such as by including a copy with each
modem you sell, I want to know about it. The reason is this: by
distributing `term' you take a certain responsability; if your customer
has difficulties in installing and configuring the program she/he will
most likely ask you for assistance. I want to make sure that if a
`term' user is in bad need of help there is somebody who will be able
to provide it. If you wish to become a `term' distributor and want your
name displayed in the `About' window, contact me for details.

   As a general rule, no profit must be made by distributing `term',
i.e. you may charge fees for copying, disks and for providing a printed
manual but no money must be charged for the software itself. I consider
taking legal actions against anyone who violates this rule. Payments
for using the program should be made to the author, not to the provider.

Orders
******

   You can order a copy via standard mail by sending a self-addressed
envelope, including postage and disks (more on this below) to the
following address:

                             Olaf Barthel
                           Brabeckstrasse 35
                           D-30559 Hannover

                      Federal Republic of Germany

   Either include three 3.5" double-density disks or two 3.5"
high-density disks. The postage must cover the mailing costs, this
should be the equivalent to DM 8,- in your preferred currency for
Europe, and DM 16,- for all other countries. All orders are shipped via
air mail. If you cannot provide the disks and the envelope, add DM 1,50
per double-density disk or DM 3,- per high-density disk and DM 2,- for
a padded envelope. If you send a check to cover my expenses, please
make sure that the fee I have to pay for cashing it (which currently is
DM 3,-) does not `eat up' the mailing costs.

   As of this writing I do not distribute printed copies of the
documentation.

   Orders must be made by mail only, not by phone or eMail.

   Whenever a new release of `term' becomes available I will try to
make it known in the telecommunications networks.

   The most current `term' release will be available through ftp from
`ftp.informatik.uni-oldenburg.de' (`134.106.1.9'), look into the
`/pub/amiga/term' directory. All Aminet sites will also receive copies
of the program.

   `term' is available for download in a number of BBSes. *Careful
please!* For reasons I have always failed to understand certain
individuals take pride in patching program version numbers, copying
archives to disk and compressing them into .DMS files, attach silly
notes to archives or extract single files from archives, just to
recompress and release them later. *Hands off these files!* `term' is
always distributed only in complete LhA-archives, never as a single
program or as a .DMS-file.  In addition to this file lists and
signatures generated using the PGP program provide authenticity. If any
of these signs are missing chances are that you have found a corrupted
copy which most likely was not released by me. My public key can be
found in the chapter PGP key (see PGP key).

   I will not distribute `term' via eMail, the program is too large to
be mailed and since I am paying both for incoming and outgoing mail it
would also be too expensive for me.

   Unless requested, no update notifications will be sent via standard
mail. I recommend that you include an international reply coupon for
each update notification you wish to receive.

   The author reserves the right to discontinue development of the
`term' program.

Letters to the author
*********************

   It is always nice to receive feedback from users, to hear about
critical comments and enhancement request. If you wish to communicate
with me I suggest that you try electronic mail channels first. As of
this writing there only exists a single Internet address
(`[e-mail]') you can send mail to. I have no Fidonet
accounts or such, in fact I don't even visit any BBSes regularly. If
you need to put a mail through to me and don't have direct Internet
access it is recommended that you use the gateway facilities most nets
offer, your local sysop or postmaster will be able to tell you more. Do
not send mail larger than about 64K bytes, as it may get caught on the
way to me and if it in facts arrives in my mail folder it will have cost
me routing fees since I pay both for my incoming and my outgoing mail.
Please don't expect me to make long-distance calls to your local BBS,
German phone rates are rather steep and I am not that wealthy after all.

   If you happen to be registered in a BBS which has no links to any
net or if you don't have any email access at all the only alternative
to dropping by and paying me a visit in person is to use the standard
mail facilities: send a letter, mail a package.  Although such mail
will usually arrive safely and unharmed there still is a problem: I am
slow at responding to `real-world mail'.  If a letter can be answered
with a few lines of text chances are good for a snappy answer, but if
the topic is a little more complex your letter may go into my mail
service stack. To give you an impression how this stack looks like:
it's a large pile of unanswered mail sitting on my desk which keeps
falling over each time I open the window. Such mail will usually get
answered at the end of the semester or when my bad conscience tells me
to.

   Be sure to mention it if you want me to send you an update to `term'
or the most recent version of the program and include some money to
cover my expenses. If you want me to help you or to give advice please
keep in mind that even though there is no denying the fact that I have
written `term' I am by no means an expert in telecommuncations matters.
So if you need to know which modem brand to choose or which Bulgarian
BBSes are worth trying I strongly suggest that you ask someone else.

   In any case, feel free to make comments and to ask questions.

Known bugs & problems
*********************

   During beta testing certain software did not work very well with
`term' (nothing serious I would say, but you may have a different
opinion). There are also a few problems that would show up at the last
minute (and at great expense) when it was too late to find a fix. Last
but not least the following list also includes a few `features' for
which I was unable to find a better solution.

   * As of Kickstart 2.04 list displays look rather odd.

     The `gadtools.library' user interface support routines do not
     handle proportional-spaced fonts very well in v2.04. Try to use a
     different user interface font, preferably a fixed-width font.

   * With `MagicMenu' running in the background the checkmark and Amiga
     symbols overwrite some menu entries.

     `MagicMenu' does not notice `term' scales these symbols to fit the
     current screen display aspect ratio. Future versions of
     `MagicMenu' may address this problem.

   * With small terminal window sizes the status line display no longer
     fits into the window.

     `term' always pays attention to the terminal settings, it does not
     take the status line width into account. No harm should be done.

   * Not all the buttons in the file transfer window do what their
     labels say.

     The XPR library running the file transfer is responsible for
     listening to the commands `term' sends to it when the `Stop entire
     transfer', `Skip current file' and `Stop transfer batch' buttons
     are pressed. Not all libraries will pay attention to these
     commands.  So far only `xprkermit.library' responds to all
     commands. The `xprzmodem.library' included in the `term'
     distribution will ignore the `Stop transfer batch' command. All
     other XPR libraries either treat all buttons the same way, i.e.
     they stop the transfer no matter which button is pressed, or just
     pay attention to the `Stop entire transfer' command.

   * The buttons in the fast! macro list do not respond to mouse clicks
     generated by pressing the Amiga+Alt keys.

     As of this writing there is no explanation which the keys behave
     so oddly.

Frequently asked questions
**************************

   This section was written in order to answer the most frequently
asked questions concerning `term'. Although I don't suppose that the
users who this section was intended for will really ready it, but it may
nevertheless still be quite useful. Each entry in the following list
explains why a particular feature works this way or the other and
possibly why.

  1. While scrolling `term' quietly swallows characters and sometimes
     whole lines.

     Usually, `term' cannot process incoming serial data while the
     terminal output processing is taking place. If output processing
     takes too much time you may end up losing incoming data. There are
     several way how to approach this problem. You could reduce the
     number of colours used for screen output, or enable the terminal
     emulation process via the `Enable emulation process' switch in the
     section entitled terminal panel (see Terminal panel).

  2. Right after a connection is established the modem hangs up the
     line.

     Following your configuration options `term' makes sure that the
     modem is set up correctly prior to making a call. Does the modem
     drop the line right after the `CONNECT' message is received your
     modem or the remote modem may reponsible. Not unheard of are
     modems which due to firmware trouble fail to negotiate correctly
     with the remote modem over the transmission protocol to be used.
     With error correction enabled such modems would drop the line right
     after establishing the connection. Turning off the error
     correction mode would correct this problem. `term' cannot do
     anything about the modem behaviour, it is up to you to find the
     correct setup.

  3. Trying to run the modem at higher baud rates causes the modem to
     ignore commands, it does not even echo characters back.

     A number of modems respond only to a fixed set of baud rates. While
     for example 9,600 bps are fine there is no response at 14,400 bps.
     I suggest that you try all available baud rates `term' supports
     until one is found to fit. Do not overdo it however, try to keep
     the baud rate below 57,600 bps.

  4. During file transfers error #6 is reported over and over again.

     Data transfer to and from the serial hardware is a time requires
     quick responses by the handler routines, this is why interrupt
     processing is used for such time-critical jobs. Unfortunately,
     these interrupts cannot always be serviced as fast as possible.
     Read and write accesses to disk may temporarily slow interrupt
     processing down or even disable it in short intervals. If the
     send/receive buffers keep flowing over I suggest that you use a
     smaller file buffer size, so data gets written to disk in smaller
     chunks, making the intervals smaller in which interrupt processing
     may be affected.  You can change the default file buffer size in
     the miscellaneous settings (see Miscellaneous panel). If this
     still does not have the desired effect, turn on the switch `Simple
     file I/O' (see Miscellaneous panel) and change the buffer size of
     the file transfer protocol you are using. Start with a small
     buffer size, such as 4,096 bytes and gradually increase it as long
     as transfers still work correctly.

  5. I have saved the phonebook and the configuration files to disk and
     an older `term' release reports that it cannot read them.

     `term' stores version information with the configuration files it
     saves. Older `term' releases will refuse to read files created by
     newer releases. Newer releases will almost always read
     configuration files by older `term' releases.

  6. I upgraded from an older `term' release, but the program refuses
     to read my configuration and phonebook files.

     The phonebook and configuration file format was changed and
     greatly enhanced with the introduction of `term' 3.1. Older files
     need to be converted to the new format, this is what the
     `UpdateConfig' program is for that should be included in the
     `term' distribution. The conversion is easy, just enter
     `UpdateConfig <old file name> <new file name>', the program
     automatically determines whether it is reading a configuration or
     a phonebook file.

     *Caution: the conversion program cannot read encrypted phonebook
     files, so they should be saved in unencrypted form first.*

  7. In some BBSes ANSI graphics and text output starts at the wrong
     screen position, especially after the screen contents are erased.

     The so-called BBS-ANSI terminal command set treats the `clear
     screen command' different from the VT-100 specs, i.e. it expects
     the cursor to be reset to the home position. You can enable this
     feature using the `CLS' resets cursor position' switch which can
     be found in the emulation panel (see Emulation panel).

  8. The text buffer window does not show any special characters, such
     as accented characters, but only dots (`.').

     The text buffer window cannot display characters which fall into
     the range between code #127 and code #159. In order to show any
     text at all these codes get replaced by the dot character.

  9. When I upgraded from an older program release (1.6 - 2.3) to the
     new `term' release the program would no longer find all its
     configuration files.

     In order to annoy you and make things generally irritating some of
     the configuration files were renamed in v2.4, and some were moved
     to different directories. While the files used to be present in
     `ENVARC:term' `term' now looks for them in `TERM:config'.  If
     `term' finds no `TERM:' assignments, it will create one. If no
     `TERM:config' directory can be found, it will also be created.
     The configuration files have been changed as follows:

    `Preferences.term'
    `term_preferences.iff'
          New name is now `term.prefs'

    `Phonebook.term'
    `term_phonebook.iff'
          New name is now `phonebook.prefs'

    `Hotkeys.term'
    `term_hotkeys.iff'
          New name is now `hotkeys.prefs'

    `Speech.term'
    `term_speech.iff'
          New name is now `speech.prefs'

    `Macros.term'
    `term_macros.iff'
    `macros.prefs'
          New name is now `functionkeys.prefs'

    `Fast!Macros.term'
    `term_fastmacros.iff'
          New name is now `fastmacros.prefs'

     In order to use `term' and `termcap' you need to rename the
     `TERMPATH' variable to `TERMCONFIGPATH'. Look into the `ENVARC:'
     directory, rename the file and reboot.

     *Caution: it is not sufficient just to rename the file names, you
     will also have to take care of the phonebook entries.*

 10. I have added several phone numbers to the quick dial menu, but
     `term' does not make them all available.

     `term' has room for only up to 50 quick dial entries, any further
     entries will be ignore.

 11. When transferring files between computers connected via null-modem
     cables the transfer always aborts immediately complaining that the
     DTR or the carrier signal was lost.

     During a null-modem transfer there is no carrier or DTR signals
     present, only modems and such offer such features. Switch the
     handshaking mode to `None' and turn off the `Check carrier' feature
     in the serial panel (see Serial panel).

 12. The dialer skips two entries at once when pressing the `Skip'
     button.

     Pressing the `Skip' button stops dialing, most modems will respond
     to this with an `OK' message. Some modems will however send `NO
     CARRIER', which `term' interpretes the same way as if `BUSY' had
     been sent. If this is what your modem does, change the ``NO
     CARRIER' = `BUSY'' switch in the Serial panel (see Serial panel).

 13. During ZModem file transfers using a fast modem the `CPS' display
     first lists an incredibly high value, then drops sharply, followed
     by lots and lots of transfer errors occuring.

     This is effect is mostly seen if the `Handshaking' mode is not set
     to `RTS/CTS' when using a fast modem. The trouble is caused by
     data getting sent while the modem has already stopped accepting
     new data. It flags this states using the RTS/CTS line.

 14. None of my ARexx scripts works any more.

     In v3.1 the `term' ARexx interface was rewritten from scratch. If
     you wish to retain your old ARexx scripts they will need to be
     rewritten.

 15. During file transfers errors show up while data is saved to and
     read from a hard disk drive.

     Some hard disk drive controllers temporarily disable interrupt
     processing while accesses take place. In such cases I recommend to
     download and upload from the ram disk or to upgrade the hard disk
     driver.

 16. Even though the speech support feature is enabled, `term' does not
     speak a single word.

     With the introduction of Workbench 2.1 Commodore ceased to support
     the speech synthesizer. If you don't have `narrator.device' and
     `translator.library' installed the speech support will not work.

 17. When downloading files they don't end up in the right directory.

     The file transfer protocol usually has it's own opinion on where to
     place files it receives. This behaviour can be changed by editing
     the `term' settings, open the miscellaneous panel (see
     Miscellaneous panel) and turn on the `Override transfer path'
     switch. Now you can select the names of the directories to store
     files received in using the transfer panel (see Transfer panel).

 18. Sometimes `term' stops processing input and output and just beeps
     when a key is hit.

     Look at the status line, if it displays `Holding' `term' has
     received an `xOFF' character. Press `Control + S' to restart.

 19. When I moved my configuration files into a different directory and
     updated my main configuration the phonebook entries started to
     `forget' about their settings files.

     `term' uses the environment variable `TERMCONFIGPATH' to locate
     its configuration files. However, the local phonebook entries may
     have different search paths set. Check the paths settings to see
     where they are pointing to.

 20. Even though several files are selected for transfer only the very
     first file is sent.

     Not every file transfer protocol supports batch transfers.  There
     is no way for `term' to tell whether a protocol supports batch
     transfers, please consult your protocol documentation for more
     information.

 21. Even though everything is set up correctly no ARexx scripts are
     executed.

     In order for ARexx to work the `RexxMast' program needs to be
     running. Usually, this program is located in the `System' drawer
     of your system partition.  Drag it into the `WBStartup' folder in
     order to use it at system startup time. Also make sure ARexx knows
     where to find your ARexx scripts. Either give a complete path name
     or copy your file into the `REXX:' drawer. Do not rely upon an
     `Assign REXX: <drawer name> add' call in your `S:User-Startup'
     file to work, as of this writing ARexx does not support
     multi-volume assignments.

 22. Even though the auto-download feature of the current file transfer
     protocol is enabled no auto transfer takes place while an ARexx
     script is running.

     Serial I/O processing only takes place if the main program takes
     care of terminal output.

 23. Running `term' twice from shell does not cause two `term'
     processes to be started, instead only the first program is
     reactivated.

     By default starting `term' more than once only brings an already
     running `term' process to the front. Use the `NEW' keyword to
     suppress this feature.

   (To be continued)

Reporting bugs
**************

   `term' is a rather complex program which is difficult to maintain,
especially since there is only one person to take care of it: me.
Although one tries to write correct, bug-free software, one cannot
always achieve this goal. Tough, but that's life. It rains when you
leave the umbrella at home. Toast falls buttered-side down. The phone
rings while you are in the bath.

   In case you come upon one of those nasty features which even the
author was unable to track down and remove, follow these steps:

  1. Keep calm.  Shouting, cursing, crushing disks may help to cool
     your temper, but it will not help anybody (the least yourself!) if
     it results in a sudden cardiac infarction: you will have problems
     in reporting the problem.

  2. Read the documentation!  The bug you may want to report may be a
     deliberate feature.

  3. Repeat previous step as often as possible.  Yes, really, do so.
     Read the documentation. You will be glad you did.

  4. Describe your problem elaborately.  A comment like `things fall
     down when dropped' may have inspired Sir Isaac Newton, but a
     similarly laconic comment `downloads do not work' will most
     certainly fail to give any useful hints how to approach the
     problem. In case you encounter a problem with the built-in
     terminal emulation, try to make a verbatim file capture (i.e. turn
     off the `Capture filter') of the session in which the offending
     codes were used and send it to me.

  5. If you wish to report a bug in the ARexx interface include a
     sample ARexx script to produce the bug.

  6. Do not forget to write it down!  There is a difference between
     noticing a bug and reporting it (honestly!). Do not suppose that a
     bug will be fixed in a future program revision or rely on anybody
     else to report it: do it yourself. Send a letter to the author,
     preferably per electronic mailing services. The addresses are
     given at the end of this document.

  7. State your system and program configuration.  It helps a lot to
     know on which machine the program caused problems. Please include
     information such as memory expansion size, Amiga model (A500+,
     A600, A1200, A3000, A4000, etc.), graphics hardware (ECS, AGA,
     etc.), CPU type (MC68000, MC68020, MC68030, MC68040, etc.).


   If you can please run the standard Commodore debugging tools
(`Enforcer', `Sushi', `tnt', `MungWall', `SegTracker') in the
background and capture the output. If you include `Enforcer' hit
reports make sure that you have `SegTracker' running in the background
or the `Enforcer' output will be worthless to me.

   Please direct reports of problems with the file transfer and
terminal emulation libraries to the respective authors, I am not
responsible for maintaining the support libraries.

   Error reports concerning the ARexx interface should include a sample
script to illustrate what is going wrong.

Background
**********

   This program is a product of anger and despair; I was unable to find
a telecommunications program to suit my personal needs, neither in the
commercial area, nor in the public-domain.

   Most programs had a lot of extras but lacked other more important,
perhaps more sensible features (just to take an example: in revision
2.20c and after four years of constant development `Handshake' still
fails to use the current keymap settings and also strips the high order
bit when receiving text - sorry Eric, that's why I never registered!).

   I have hesitated for a long time before starting my first attempt at
writing my very own telecommunications program. When Kickstart 2.x was
about to become widely available I took the opportunity to create
`term' always trying to use the new OS routines wherever possible.
While this started to be quite a difficult task it also was a lot of
fun (imagine Columbus wrecking his fleet four times on his journey to
the West Indies due to unexpected leakages in all vessels and sudden
changes in the ships' sailing manuals - that's how I felt!).

   As far as computer-telecommunications are concerned, Germany appears
to be a developing country. This is partly due to the Deutsche
Bundespost, the federal mail/phone company whose telecommunications
monopoly used to be protected by federal law.  Until 1989 you would
risk a heavy penalty if using a non-registered modem or telephone
instead of the Bundespost-supplied hardware. So, if you have any
complaints or miss a few extremely important features in `term', don't
boo and hiss, I am not as long in the telecomm business as you are (I
have yet seen only a single `DEC VT-101' from afar!). Tell me what you
need and I will try to add it in the next revision.

   This project was started at December 24 1990 and completed by
January 25 1991.

Future
******

   I spent almost five years of my life programming and updating `term'.
Support for new operating system features was added as soon as Commodore
lifted the veil. `term' grew both in functionality and size, it was
difficult to make plans for the path development would follow. While I
have no specific idea which turn development may take in the future
there are a few things I definitely do not want to add:

   * FAX support

     There are plenty of good commercial FAX solutions available for
     the Amiga. I lack both the time and the motivation to add FAX
     support to `term'. However, future `term' releases may provide
     interfaces to FAX programs.

   * More terminal emulations

     `term' offers support for the XEM standard, making it possible to
     easily add external terminal emulation libraries. If you are
     looking for a RIP emulation or a certain Data General terminal
     emulation, try to find an external emulation library.

   * Script language

     `term' supports ARexx, I don't see any reason why I should add
     another script language.

   * More file transfer protocols

     Except for the ASCII transfer routines `term' offers no built-in
     file transfer protocols. This is what the XPR interface is for,
     external file transfer libraries provide all the file transfer
     services. If you need a file transfer protocol, look for an
     external transfer protocol library.

   * Reduced functionality

     It was `tough' enough to implement all the features, bits & pieces
     that make up `term'. Honestly, I don't have the heart to cut back
     features.  It would not have been the first attempt to make `term'
     smaller either; there have been numerous attempts to create
     programs to copy the functionality of `term' or to build a
     smaller, scaled down terminal program based upon the `term' source
     code. As far as I know none of these attempts was successful.

   It is difficult to judge how the next `term' release will look like.
Also, v4.0 may be the last `term' release, but then again maybe not.
The future of `term' depends on its users, and this includes you.

Acknowledgements
****************

   My thanks go to the following people for their invaluable help and
assistance: Andreas Kirchwitz, Christoph Teuber, Christopher Wichura,
Garry Glendown, Germar Morgenthaler, Henning Hucke, Holger Lubitz,
Juergen Otte, Marc-Christian Schroer, Marko Kuechmann, Markus Stoll,
Martin Berndt, Martin Taillefer, Matthias Zepf, Michael Vaeth, Michael
Wolfgang Hohmann, Oliver Wagner, Peter Fischer, Ralf Thanner, Ralph
Schmidt, Roby Leemann & AUGS, Stefan Becker, Thorsten Seidel, Till
`Dill-Prince' Prinzler, Udo Wolt, Ueli Kaufmann, Veith Schoergenhummer,
Volker Ulle & the Aquila Sysop Team and to all those who supplied
libraries & control sequence tables.

   Special thanks go to John Burton of Papua New Guinea who revised and
rewrote certain parts of the program, in particular the terminal
emulation routines, Leo Schwab who discovered means to use interleaved
screen bitmaps in a system-integrated manner and to Nicola Salmoria
whose invaluable assistance helped to reduce the incredible number of
bugs lurking in the source code.

   Additional user interface wizardry and advice by Martin Taillefer.
The file transfer section of this manual was rewritten to incorporate
several suggestions made by Mike Safer.

   The XPR libraries were created by Terence Finney (`bplus'), Marco
Papa & Stephen Walton (`kermit'), Jack Rouse (`quickb'), Marc Boucher
(`xmodem'), Ueli Kaufmann (`ascii', `ymodem' & `vms') and Rick Huebner
& William M. Perkins (`zmodem').

   The XPR standard was created by Willy Langeveld, the quicksort
routine (`QuickSort.asm') was written by David Jones.

   The current implementation of the external terminal emulation
library interface was developed by Ueli Kaufmann, who also wrote the
external terminal emulation libraries supplied with `term'.  Without
the invaluable help of Martin Berndt the library interface would
probably not be working at all.

   Since time did not permit me to translate the full original German
documentation into English, I had asked the Z-Net Amiga community for
help. As a result this document was translated by three different
authors (in order of translation): me, Marc Schroer and Henning Hucke.
Garry Glendown took care of the original termRexx documentation -
thanks to all of you!

   The beta tester group, consisting of Abdelkader Benbachir, Alfredo
Rojas, Andreas M. Kirchwitz, Bernd Ernesti, Bob Maple, Bodo Thevissen,
Chris Hanson, Chris Mattingly, Christoph Guelicher, Christopher G.
Newby, Christian Hechelmann, Dabe Murphy, Daniel M. Makovec, Dean S.
Pemberton, Eric W. Sommer, Florian Hinzmann, Frank Duerring, Gary B.
Standen, Gregory A. Chance, Holger Heinrich, Holger Lubitz, Hung-Tung
Hsu, Jason C. Leach, Jay Grizzard, Joel E. Swan, Jonathan Tew, Juergen
Zeschky, Julian Matthew, Kai Iske, Karsten Rother, Kay Gehrke, Keith A
Stewart, Keith Christopher, Kenneth Fribert, Klaus Duerr, Leon D.
Shaner, Mark Constable, Martin Berndt, Matthias Scheler, Matti Rintala,
Michael Zielesny, Olaf Peters, Ottmar Roehrig, Peer Hasselmeyer, Peter
L. Banville Jr., Piotr Kaminski, Robert L. Shady, Robert Reiswig,
Rodney Hester, Russell John LeBar, Sebastian Delmont, Stefan Becker,
Stefan Gybas, Stefan Hudson, Steve Corder, Sven Reger, Tony Kirkland,
William Michael Mushkin and Yves Perrenoud, took care of testing the
program - thank you very, very much!

Source code
***********

   Since there are still only very few well-documented examples (or
general programming examples) for Kickstart 2.x and Kickstart 3.x I
have decided to include the full `C' source code with the `term'
distribution.

   The source code is *not* intended for commercial use. If you are
about to include portions in commercial programs you will need to ask
me for permission. Still you may use parts of the source code for
non-commercial software development without my consent.

   I sincerely hope that the release of the full `term' source code
will give Kickstart 2.x a better start (I've overcome quite a lot of
obstacles) so that more programs to use the new OS features will be
available soon.

Documentation and online help
*****************************

   `term' comes bundled with a number of documentation files, these are:

`term.doc'
     Human-readable english program documentation in standard ASCII
     format.

`term.guide'
     English program documentation in AmigaGuide format suitable to
     submit to `AmigaGuide' or `MultiView'.

`termRexx.doc'
     Human-readable english `term' ARexx interface documentation in
     standard ASCII format. This file describes all the ARexx host
     commands `term' supports and also gives a brief introduction how
     to use them.

`termRexx.guide'
     English ARexx interface documentation in AmigaGuide format
     suitable to submit to `AmigaGuide' or `MultiView'.

`xprascii.doc ... xprzmodem.doc'
     Human-readable documentation on the XPR transfer libraries
     supplied with `term'.

   In addition to the pure ASCII files documentation files are
available in TeX-DVI format and Postscript. As space requirements do
not permit to include them on the distribution disks they are only
available directly from the author.

`term.dvi'
     English program documentation in a format suitable for printing
     using a utility to print TeX-DVI-output files, such as supplied
     with the packages AmigaTeX or PasTeX.

`term.ps'
     English program documentation in Postscript format. This file was
     generated from `term.dvi' using the `dvips' utility.

`termRexx.dvi'
     English ARexx interface documentation in a format suitable to
     printing using a utility to print TeX-DVI-output files, such as
     supplied with the packages AmigaTeX or PasTeX.

`termRexx.ps'
     English ARexx interface documentation in Postscript format.  This
     file was generated from `termRexx.dvi' using the `dvips' utility.

   In order to take advantage of the online-help feature, AmigaGuide
and the file `term.guide' are required. Copy the file to the drawer the
`term' main program is located in and configure the ``term' help text
file' settings (see Path panel) to point to `PROGDIR:term.guide'. Once
this has been done, pressing the `Help' key in any window to support
online help will bring up a help window.

Foreign language support
************************

   `term' supports foreign language text catalog tables as introduced
with Workbench 2.1 `locale.library'. As of this writing there are
Dutch, Swedish, French, Danish and German translation of the program
text available. If you wish to create your own national translation
table you should consult the program source code file `term-blank.ct'
which is a blank translation table. Before actually starting to fill in
the translation table you should contact me first; there may already be
someone preparing a translation. However, you should keep in mind that
once you have created a foreign language translation of the program
text I may ask you to update your translation for a future program
release.

   Once you are finished with the translation table, send it to me on
disk or via eMail, *don't compile the catalog on your own!*.

Workbench and Shell
*******************

   The program can be started both from Workbench and from Shell.
Kickstart 2.04 (revision 37.175) and Workbench 2.04 (revision 37.67)
are the minimum required to run `term'.

   The `behaviour' of `term' can be changed by adding tool type entries
to the corresponding Workbench icon or by specifying additional command
line parameters when running the program from the Shell. Supported
keywords are:

`WINDOW'
     The console window specifier to be used when opening terminal
     output windows (this will override the default settings). The
     default is `CON:0/11//100/term Output Window/CLOSE/SCREEN %s'. The
     `%s' will be replaced by the name of the public screen `term' uses.

`PUBSCREEN'
     The name of a public screen to open the `term' window on. In case
     the public screen happens to be unavailable, `term' will fall back
     to the Workbench screen. Note that `term' assumes that the main
     window is to be opened on a public screen rather than on a custom
     screen if this option is in effect, regardless how the default
     settings may be configured.

`STARTUP'
     The name of an ARexx script file to be run on program startup.

`PORTNAME'
     The ARexx host port name `term' is to use instead of the built-in
     default name. The port name will be translated to upper case
     characters as required by the ARexx host port naming convention.
     The resulting name must be unique or `term' will fall back to its
     built-in default name.

`SETTINGS'
     This keyword determines where to read the default configuration
     file from. In order to read it from `Work:term/config', one would
     use `term Settings Work:term/config' from Shell or add the tooltype
     entry `SETTINGS=Work:term/config' from Workbench. This argument
     does not necessarily need give the name of a path to search, but
     can also specify the name of the configuration file to be used.

`UNIT'
     Similar to the `DEVICE' keyword the `UNIT' keywords affects the
     serial driver settings. It determines which serial driver unit is
     to be used instead of the one specified in the default
     configuration file. In order to use unit number 4 one would use
     `term Unit 4' from Shell or add the tooltype entry `UNIT=4' from
     Workbench.

`DEVICE'
     In order to use a different serial device driver than the one
     specified in the default configuration file, use this keyword. To
     use `duart.device' one would use `term Device duart.device' from
     Shell or add the tooltype entry `DEVICE=duart.device' from
     Workbench.

`QUIET'
     If this parameter is present, the program will not start opening a
     display but rather put an icon on the Workbench backdrop, waiting
     to be invoked. A double-click will bring it to life. This
     parameter will be ignored in case the `STARTUP'-Parameter is used
     along with it.

`SYNC (Shell only)'
     If called from Shell `term' will detach itself immediately
     allowing the Shell window to be closed afterwards. This effect can
     be avoided if `SYNC' is entered in the command line.

`NEW (Shell only)'
     Usually, running `term' twice will cause the screen of the other
     program to be popped to the front instead of creating a second
     `term' process. To avoid this effect, enter `NEW' as a calling
     parameter. If called from Workbench, each program will run as a
     separate process.

`BEHIND'
     This option will cause `term' to open its screen behind all other
     screens and not to activate its window.

User interface notes
********************

   To operate a gadget, press the key corresponding to the letter
highlighted in the gadget label. Suppose a slider is labeled `Baud
rate' with the letter `r' of the word `rate' underlined; in order to
increase the slider value one had to hit the key labeled `R', to
decrease the value one is to hold down either `Shift' key while
pressing the key `R'.

   With some requesters and windows text gadgets will be
auto-activated. Pressing the `Return' key will cycle through all the
available text gadgets, holding down either `Shift' key will break the
cycle.

   Windows in which only a single scrolling list is present cursor keys
may be used to scroll the contents.

   The `Return' and `Escape' keys are respected by most windows. A
button surrounded by a recessed box represents the default choice in a
requester, pressing the `Return' key will select it. The `Escape' key
always selects the `stop' or `cancel' button usually to be found in the
lower right corner of a window. Most windows to feature a close gadget
in the upper left corner can be closed by pressing the `Escape' key.

   Numeric entry fields accept input several notations, namely
hexadecimal (`$..' and `0x..'), octal (`&..') and binary (`%..').

   The user interface support library tries to make all control panel
windows fit on the screen. If the first attempt fails a different font
is used. If this did not help either a new screen will be opened for
the window. This screen will usually be larger than the visible region.
Move the mouse towards the borders of the screen to reveal more of it.

Screen
******

   Unless configured to open only a simple window on a public screen the
`term' main screen will alway open to the full text-overscan size (which
can be set using the `Overscan' tool in the `Prefs' drawer).

   At the bottom of the screen a small window displays a few basic
parameters.  These are:

`Status'
     The current program operating status. This includes `Ready',
     `Holding' (`Control + S' was pressed), `Dialing' (the dialing
     function is at work), `Upload' (data is being sent), `Download'
     (data is being received), `Breaking' (a break signal is
     transmitted across the serial line), `Hanging up' (connection is
     being cancelled), `Recording' (a script is being recorded) and
     `Rec.line' (a line of text is being recorded).

`Buffer'
     Indicates whether the text buffer is currently recording incoming
     text or whether the current text buffer contents are frozen.

`Protocol'
     The currently selected data transfer protocol.

`Emulation'
     The currently active terminal emulation mode.

`Rate'
     The data transfer rate in bits per second (= Baud).

`Params.'
     The current serial parameters (Data bits-Parity-Stop bits).

`Time'
     The current time of day.

`Online'
     The time elapsed after a connection was successfully established.
     This counter will be stopped as soon as the connection is
     cancelled (e.g. by hanging up) and is reset to 00:00:00 as soon as
     a new connection is made.

     This display will show the online time, the online cost or both
     (toggled every five seconds) depending on your current settings.

   Unless configured different, the screen itself is opened as a public
screen (called `TERM') which is available to other programs for their
purposes. If more than one `term' process is running, the public screen
name will change according to the number of the program (i.e. the first
`term' to be started will call the scren `TERM', the second one will
call it `TERM.1', the third one `TERM.2', etc.). The screen title bar
will also display the name of the public screen.

Menus
*****

   For each requester and input window there exists a set of menu items
to execute the commands associated with the buttons, dials and gauges in
the requester/window. Press the right mouse button to have a look at
the commands and their shortcuts.

   The following text is to describe the menu items available in the
`term' main menu.

Project
=======

`Save screen as Picture/Text'
     This menu serves to save the current terminal window contents
     either as plain ASCII text file or as a picture file.

`Print Screen (as text)/Clipboard'
     These menu entries are to output plain text on the printer. You
     can either print the contents of the main screen or the contents
     of the clipboard.

`Print Screen (as graphics)'
     Select this menu entry to make a hardcopy of the screen contents.
     Printing will respect screen colours and follow the on-screen bit
     image.

`Capture to File/Printer'
     Selecting one of these menu entries will toggle capturing incoming
     text to the printer and/or a file on disk.

`Iconify'
     Closes all screens and windows `term' has currently open, if this
     feature is enabled, resets and releases the serial driver and puts
     an icon into the Workbench window.  Double-clicking this icon will
     cause `term' to wake up and to return the state is was in before
     iconification took place.

     *While `term' is iconified, most incoming ARexx-commands will be
     queued and the corresponding ARexx scripts will appear to `hang'.
     In order to reactivate the program either double-click on the
     program icon or send the ARexx command `ACTIVATE'. As soon as
     `term' is `awake' again pending commands will be processed again*

`About'
     Shows some information on the program.

`Quit'
     Terminates the program, hold down a `Shift' key to quit
     immediately, otherwise you will be prompted to confirm your
     decision.

Edit
====

`Copy'
     In order to transfer any currently marked screen text to the
     clipboard buffer, select this menu item. Text can be marked by
     double-clicking the select button while the mouse is over a word
     or by clicking the select button and dragging the mouse. Holding
     down either shift key will append the selected text to the current
     clipboard contents.  In any other case the new text will replace
     the previous contents.

`Paste'
     Pastes the contents of the clipboard at the current cursor position
     provided that the clipboard contains text data. Hold down either
     `Shift' key to have `term' include the `Paste prefix' and the
     `Paste suffix' (see Clipboard panel) along with the clipboard
     contents.

`Clear'
     Any currently marked text will be released as soon as any rendering
     operations are to be executed in the main window. To release marked
     text manually, select this menu item.

Cmds. (= Commands)
==================

`Execute AmigaDOS command'
     Enter the command you want to execute and its command line
     arguments here.

`Execute ARexx command'
     This function calls the ARexx server to execute a script file. If
     the first input character is a ` or " the input will be considered
     as a small program in a single line. Note that this function will
     not be available if the ARexx server isn't running.

     The ARexx command set supported by `term' is described in the
     `term' ARexx interface documentation.

`Record script'
     Select this menu item to start/stop script recording. More on
     script recording can be found under script recording (see Script
     recording).

`Record line'
     When in script recording mode this menu item will cause `term' to
     temporarily switch into full line recording mode, rather than
     recording only single keystrokes. Pressing the `shift+return' keys
     has the same effect as calling the `Record line' menu item. More
     on the topic of script recording can be found under script
     recording (see Script recording).

`Edit traps...'
     This brings up the trap list editor (see Trap panel.  The list
     includes control sequences `term' is to look for in the incoming
     data stream. When a sequence is found the corresponding command
     sequence (see Command sequences) is executed.

     The window contains the usual list management tools (edit, add,
     remove, clear and move). Please note that the order of processing
     occurs top-down, i.e. of two entries with the same control
     sequence data only the top-most will be evaluated.

     The buttons `Load' and `Save' will let you restore and save the
     current trap list. The `Load' button appends the contents of a
     trap list file to the current trap list, so take care. On startup
     `term' looks for a configuration file named `trap.prefs' and tries
     to load it. Thus, there can be only one global trap list. It is up
     to ARexx to load and modify the contents of the trap list,
     although this editor window provides a graphical interface to the
     list. Please note that the more list entries `term' has to filter
     through the input data stream the slower input processing may
     become, affecting mostly terminal output.

`Disable traps'
     This menu item provides a shortcut to stop trap list processing.
     On startup `term' will enable trap list processing if the trap
     list loaded from disk is non-empty.

Phone
=====

`Phonebook'
     The phonebook is one of the most powerful and complex functions of
     `term' and will be described later in this document (see
     Phonebook).

`Redial'
     Dialing list entries which the dialing routine was unable to
     establish a connection to are once again passed to the dialer.

`Dial phone number'
     To dial a single phone number select this menu item. The phone
     number entered will be passed to the dialing routine.

`Send break'
     Sends a `break' signal across the serial line.

`Hang up'
     Tells the modem to hang up the serial line.

`Wait'
     Will cause `term' to emit the character sequence `<Blank
     space><Backspace>' every second in order to fool the remote into
     believing that terminal input is currently taking place.

`Flush receive buffer'
     Tells the serial driver to drop its input buffer contents and
     resets the state of the internal serial buffers.

`Release serial device'
     The serial driver is released for other programs to use it. A
     requester will appear which allows you to reopen the serial driver
     or to quit `term'.

     If the serial driver has been released by the ARexx interface and
     has not been reopened yet, this menu item will do it.

   If you are still online, the `Redial' and `Dial' menu entries will be
disabled. In order to make another call, hang up the line first.

Transf. (= Transfer)
====================

   This menu provides access to file transfer functions. For more
information on this topic, see Transfer panel, XPR options sample,
Transfer progress panel, ASCII-transfer panel and ASCII-transfer
settings.

`Upload ASCII file(s)'
     This is a pure ASCII-file upload. It was added to allow poor BBS
     programs to receive text files.

`Download ASCII file(s)'
     This is a pure ASCII-file download. Refer to `Upload ASCII
     file(s)' for features/options of this mode.

`Upload text file(s)'
     Sends a file/files to the remote receiver using the current
     transfer protocol. If possible this command will `ask' the
     transfer protocol to transmit the file(s) in text mode (whatever
     that means) which may include CR/LF substitution and other
     gimmicks. Consult the library documentation to find out if your
     favourite transfer library supports text mode.

`Download text file(s)'
     Request a file/files using the current transfer protocol. Refer to
     `Upload text file(s)' for features/options of this mode.

`Edit & upload text file'
     Invokes the currently selected (see Path panel) text editor on a
     file to be selected using a file requester. `term' pays attention
     to the `EDITOR' environment variable and will use the program
     indicated by it.

     `term' will block and wait until the editor has returned.

     After the editor has returned, the user will be asked whether the
     file edited is to be transferred as plain ASCII or via text upload.

`Upload binary file(s)'
     Send a file/files to the remote receiver using the current transfer
     protocol. True batch upload is supported both through wildcard
     expressions (`#?.txt' will send all files whose names end with
     `.txt') or through multiple selection. Refer to the documentation
     of your favourite transfer library to find out if batch file
     transfer is supported.

`Download binary file(s)'
     Receive a file/files using the current transfer protocol. If the
     protocol does not support batch download you are required to enter
     the name of the file to be received. Files which remain empty
     after the transfer are deleted automatically.

   The transfer routines open an information window in which a number of
transfer parameters are displayed (see Transfer progress panel).

Buffer
======

`Clear buffer'
     Clears the contents of the text buffer (see Text buffer). Any text
     will be discarded and *cannot* be recovered. Capture files are not
     affected by this command.

`Display buffer'
     Opens the text buffer screen (see Text buffer).

`Close buffer'
     Closes the text buffer screen but does not free the contents.

`Freeze buffer'
     This menu entry will, if enabled, stop the text buffer from
     filling up with new text.

`Load buffer'
     Loads the contents of the text buffer from a file. If there are
     still text lines in the text buffer a requester will appear giving
     you the choice to discard the old data, append the new data, or to
     cancel the action.

`Save buffer as'
     Saves the contents of the text buffer to a file. You will be
     notified if the file to save to already exists (you may discard
     the old file, append the new data or cancel the action).

Terminal
========

`Clear screen'
     Clears the whole `term' screen and moves the cursor to the top
     left home position.

`Reset font'
     Will change the screen font back to the default screen font.

`Reset styles'
     Resets all character style attributes (bold, blinking, inverse
     video, underlined, etc.) and sets the text colour to the default
     pen.

`Reset terminal'
     Use this menu item to reset the state of the entire terminal
     emulation.

Settings
========

   This is where you configure the standard preferences settings. If
you select `New' in the phonebook window (see Phonebook) these standard
settings will be used.  Put in your most commonly used settings here.
Change individual entries in the phonebook as needed.

`Serial'
     See Serial panel

`Modem'
     See Modem panel.

`Screen'
     See Screen panel.

`Terminal'
     See Terminal panel.

`Emulation'
     See Emulation panel.

`Clipboard'
     See Clipboard panel.

`Capture'
     See Capture panel.

`Commands'
     See Command panel.

`Miscellaneous'
     See Miscellaneous panel.

`Paths'
     See Path panel.

`Transfer protocol'
     See Transfer panel.

`Transfer protocol options'
     If the transfer protocol options menu item is selected, a transfer
     settings panel is displayed. The `Default transfer library' in the
     transfer panel (see Transfer panel) determines the contents of
     this control panel.  If the selected default transfer library does
     not provide these facilities, a simple text requester will prompt
     for input. Consult the documentation of the chosen transfer
     protocol for legal options and the values to which they can be set.

     As an example, see XPR options sample.

`Translation tables'
     See Translation panel.

`Function keys'
     See Function key panel.

`Fast! macros'
     See Fast macro panel.

`Hotkeys'
     See Hotkey panel.

`Speech'
     See Speech panel.

`Sound'
     See Sound panel.

`Area codes'
     See Area code panel.

`Console window...'
     Whenever an AmigaDOS/ARexx command is executed an output window is
     opened. This menu item will bring up a requester allowing you to
     edit the size and position of the window to be opened (consult
     your AmigaDOS manual for a description of the window position
     string). If you do not want the window to appear, simply enter
     `NIL:'. If the `%s' formatting parameter is used in the output
     specification it will be replaced by the name of the public screen
     `term' uses.

Windows
=======

`Status'
     This function opens a window to display program status information.
     A click on the `Update' button will cause the information to be
     brought up to date:

    `Session start'
          When was the program started?

    `Bytes received'
          The number of bytes received.

    `Bytes sent'
          The number of bytes sent.

    `Connection message'
          The text returned by the modem when a connection was made
          immediately following the `CONNECT' message.

    `Name'
          If available, the name of the system the modem is currently
          connected to.

    `Phone number'
          If available, the phone number of the system the modem is
          currently connected to.

    `Comment'
          If available, the phonebook comment corresponding to the
          system the modem is currently connected to.

    `User name'
          If available, the user name, as available through the
          phonebook, corresponding to the system the modem is currently
          connected to.

    `Screen size'
          The size of the terminal output window in characters (columns
          and rows).

    `ARexx port name'
          The name of the ARexx host `term' is currently using.

    `Buffer size (bytes)'
          The size of the text buffer (see Text buffer).

    `Free memory (bytes)'
          The amount of free system memory.

`Review'
     A review window is opened which basically displays the same text
     as the text buffer screen. You can scroll through the text
     displayed both by mouse (see the right hand side scroller) and by
     cursor keys.

`Packet'
     Opens an input window in which a single line of characters to be
     transferred across the serial line can be entered. More on this
     feature is explained below (see Packet window).

`Chat line'
     This adds a one-line text entry field just above the status line
     (or the bottom of the main window, whatever is available at the
     moment).  For more information, see Chat line.

`Fast! macros'
     Opens or closes the so-called fast macro panel (see Fast macro
     panel).  For more information on fast! macros see Fast! macros.

`Upload queue'
     This will open a window featuring a list of files to upload. You
     can drag icons of files to upload on this window, their names will
     appear in the list. Dragging icons on the icon labeled `term
     Upload queue' has the same effect. Double-clicking this icon will
     open the upload list window on the Workbench screen.  In order to
     start an upload either press the `Binary upload' or `Text upload'
     button.

     You can replace the icon `term' uses by copying the icon of your
     choice into the directory `term' resides in and naming it
     `term_DropIcon'.

     For more information on the Upload queue see File upload panel.

The quick dialing menu
======================

   Note: this menu is available only in case any phonebook entries have
the special `Quick menu' switch set.

   Selecting any item of this menu will cause the corresponding phone
number to be dialled. Extended selection and drag-selection are also
available when picking services to dial. Please note that you can
`check in' single items by selecting them, but you cannot remove any
items from the dial list.

Control panels
**************

   This where all the control panels employed by `term' are explained:

Serial panel
============

   This is where the serial parameters may be changed.

`Baud rate'
     The transfer speed in bits per second at which `term' communicates
     with the serial hardware. The minimum value allowed is 110 baud.
     You may enter any value you like but keep in mind that not all
     modems will respond to all possible settings.  Clicking on the
     arrows pointing to the left and to the right will cycle through a
     set of predefined rates.

     As of this writing the standard Amiga serial hardware is capable
     of running baud rates from 110 up to and including 1,000,000 bits
     per second. These are the basic hardware limits, but in practice
     reliable transfer speeds are far lower at 57,600 baud and below.
     Custom serial hardware may support higher transfer rates. Do not
     underestimate the overhead caused by the terminal program &
     interrupt processing and the effects of connecting cable lengths.

     Most modems will not recognize a sudden change in the baud rate.
     Type `AT<RETURN>' to make the change known.

`Bits/char'
     Number of bits per transferred character (7 or 8). As of this
     writing the Amiga serial hardware does not support all possible
     bits/char, parity and stop bits combinations.

`Parity'
     Serial parity (none, odd, even, mark or space). As of this writing
     the Amiga serial hardware does not support all possible bits/char,
     parity and stop bits combinations.

`Stop bits'
     Number of stop bits (1 or 2). As of this writing the Amiga serial
     hardware does not support all possible bits/char, parity and stop
     bits combinations.

`Handshaking'
     Serial handshaking mode (RTS/CTS 7 wire hardware handshaking,
     RTS/CTS with DSR signal check, none).  The `RTS/CTS (DSR)' mode
     will make `term' check the `data set ready' signal first before
     turning on RTS/CTS handshaking. If no signal is present `term'
     will turn off RTS/CTS 7 wire hardware handshaking.

`Duplex'
     Determines whether characters are echoed back to the terminal
     screen or not (full, half = local echo).

`Buffer size'
     The number to be specified here allows to set the serial driver I/O
     buffer size. *Every number you enter here will result in `term'
     and the serial driver allocating twice the buffer size (this is
     only a word of warning for those among us who prefer buffer sizes
     of 256K and up).*

`Break length'
     Length of the break signal given in microseconds.

`Strip bit 8'
     If this switch is effect each character received or transmitted by
     `term' will have its high-order bit cleared.

`Shared access'
     This switch allows you to run the serial driver in shared access
     mode.  Not all driver types will allow this to happen.

`xON/xOFF'
     This switch enables the processing of the flow-control characters
     `xON' (= `Control + S') and `xOFF' (= `Control + Q').  Whenever an
     `xON' character is received, `term' will change its state to
     `holding' and stop terminal input and output processing.  Press
     `Control + Q' in order to restart.

`Pass xON/xOFF through'
     If this switch is enabled, `term' will pass the `xON'/`xOFF'
     characters through to the modem rather than quietly discarding
     them.

`Check carrier'
     `term' will recognize the `NO CARRIER' message a modem emits when
     the carrier line signal drops back to low. For maximum safety,
     `term' will also check the carrier signal line after receiving the
     `NO CARRIER' message if this switch is enabled. This is to make
     sure that no accidentally appearing text causes confusion.

     If this switch is enabled, `term' will check the carrier signal
     during file transfers and will stop the transfer if the signal is
     lost. It will also check the carrier signal at program startup and
     if the signal is detected will start the online timer. If offline,
     `term' will check the carrier signal periodically and go into
     online state if the signal is detected.

     *Note:  Be sure to switch the carrier detect check off in case you
     wish to transfer files using a null-modem cable!*

`High-speed mode'
     Activates a special mode of the serial driver which is to skip a
     couple of internal parity and stop bits checks resulting in higher
     data throughput rate. *If this switch is turned on, the serial
     parameters will be reset to 8 bits per character, no parity and 1
     stop bit.* Do not expect dramatic speed increases.

`Quantum'
     The number of bytes `term' tries to read in one chunk at a time.
     The more bytes read, the more time it takes to process them. While
     the text is processed, mouse and keyboard input are delayed.
     Choose this value with care.

`Use OwnDevUnit'
     This switch controls whether Christopher Wichura's
     `OwnDevUnit.library' will be used to schedule access of multiple
     programs to the currently selected serial device driver.

`Satisfy requests'
     When a program requests access to the serial device driver, `term'
     is supposed to let go of the driver if possible. This switch
     controls what `term' will do in this case:

    `Release device'
          The driver is released, just as if you would select the main
          menu item of the same name.

    `Release device, attempt to reown'
          The device driver is released, but `term' will retry every
          four seconds to reopen and thus `reown' it again.

    `Keep device open'
          `term' always ignores requests to release the device driver.

`Serial device'
     The name of the serial driver to be used by `term'. This is usually
     `serial.device' (`modem0.device' for the internal Supra modem,
     `sxbios.device' for ASDG's serial IO card, etc.; consult your
     hardware manual for more information).

`Device unit number'
     The device unit number of the serial driver selected above. This is
     usually left `0' but can also be used to address multiple serial IO
     ports.

`Use'
     Accept the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Don't use the current settings.

Modem panel
===========

   This is where modem control text and other related parameters are
configured.

`Modem init'
     The text to send to the modem after successful program
     initialization.  This text is optional and thus does not need to
     be present.

     The dialing routine will use the initialization text entered here
     before dialing a phone number. You can separate multiple
     initialization commands with vertical bar (`|') characters.  Only
     the dialer will use them.

`Modem exit'
     The text to be sent to the modem shortly before the program
     terminates. Just like the modem init text it is optional and does
     not need to be present.

     The dialing routine will use the initialization text entered here
     before dialing the next telephone number.

     The dialing routine will use the exit text entered here before
     dialing a phone number. You can separate multiple exit commands
     with vertical bar (`|') characters.  Only the dialer will use them.

`Hang up'
     The text to be sent to the modem when asked to hang up the line.
     This text does have to be present if the `Drop DTR on hangup'
     switch is enabled.

`No carrier'
     The message the modem emits if the data carrier is lost. The
     program uses this to determine the length of the connection and to
     calculate how much the user is to pay for it.

`No dialtone'
     The message to be returned by the modem in case it does not detect
     any dialing tone on the phone line.

`Connect'
     The message the modem emits after detecting a carrier signal.
     `term' uses this input to determine successful telephone
     connection, to reconfigure itself and to start the online timer.

`Voice'
     The message `term' is expected to receive if the modem detects a
     voice call. If in dialing mode, `term' will stop the process. The
     user will in any case be notified of the event.

`Ring'
     The message the modem emits if it receives a call, same effects as
     with the `Voice' message.

`Busy'
     The message the modem returns if the number which has just been
     dialed is busy.

`Ok'
     The message the modem returns if a command was successfully
     executed.

`Error'
     The message the modem returns if a command was not to be executed
     successfully.

`Dial prefix'
     The text to be used to prefix each dialing command. This is
     usually a variant of `ATDP' or `ATDT'.

`Dial suffix'
     The text to be used to append to each dialing command. This is
     usually the carriage-return character `\r'.

`Redial delay'
     The time to wait after walking through the whole dialing list
     without making any successful connection before another attempt is
     started.

`Dial retries'
     The number of times the dialer walks through the dialing list
     trying to make a successful connection before giving up. Setting
     this value to `unlimited' will cause the dialer to retry over and
     over again until it either makes a connection or the dialing
     procedure is aborted.

`Dial timeout'
     The time to wait for a successful connection during dialing. After
     this time has elapsed, the dialer will skip to the next entry in
     the list.

`Redial after hanging up'
     If this switch is in effect, `term' will redial all the phone
     numbers still in the dialing list as soon as the line is hung up
     or the carrier signal is lost.

`Connect auto-baud'
     Most modems echo the baud rate upon successful connection. If
     enabled the baud rate will be read and set for the serial driver.

     *Use this feature with care as it may have certain negative
     side-effects (such as the modem dropping the line just after
     connecting to a BBS)!  If you happen to use a modern high-speed
     modem you will most certainly not need this feature. If in doubt
     whether you need to enable this feature you should rather disable
     it!*

`Drop DTR on hangup'
     Some modems will track the `data terminal ready' line in order to
     make sure that the terminal program is listening. Once the line
     goes back to low potential, these modems will drop the line and
     hang up. Use this button to make `term' take advantage of this
     feature.

``NO CARRIER' = `BUSY''
     If this switch is in effect, the dialing function will treat the
     modem response code `NO CARRIER' exactly as the `BUSY' response
     code.

`Dialer abort hangs up'
     Unless this switch is enabled the dialing procedure will try to
     stop a modem dial command by sending a plain carriage return
     character.  If the `Dialer abort hangs up' switch is enabled the
     usual modem hang up procedure will be used instead.

`Time to connect'
     `term' cannot measure the time to pass between the remote modem
     picking up the line and the local modem sending the `CONNECT'
     message. This slider allows to set the length of this interval.
     Upon connection, it will be added to the total online time.

`Connect limit'
     This gauge is to set a certain period of time to be counted after
     a connection is made. When elapsed, a control sequence will be
     executed as to be set using the `Limit macro' settings. If set to
     `0:00' this function will be disabled.

`Limit macro'
     A control sequence to be triggered when the time to be set using
     the `Connect limit' gauge has elapsed. If no text is entered this
     function will be disabled.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep original settings.

Screen panel
============

`Display mode'
     Choose the display mode `term' is to use for the main screen here.

`Screen font'
     This is where you choose the user interface font `term' is to use
     for the main screen.

`Faster layout'
     Activating this switch will slow down display updates and window
     management. Oh well, not always, there may be a speed increase with
     some configurations, such as with external emulations activated or
     when using more than four colours on the screen.

     I suggest to experiment with the effects of this button before
     actually using it permanently.

`Make screen public'
     If this switch is enabled, the `term' main screen will be made
     available as a public area other programs may open their windows
     on.

``Shanghai' windows'
     This item, which is only displayed if `Make screen public' has been
     selected, is closely related to the function before. If active, all
     windows that will normally be displayed on the Workbench screen
     will open on the `term' main screen.

`Use public screen'
     `term' does not necessarily open a custom screen, this switch will
     make the main and auxilary windows appear on a named public
     screen. `term' will try to adapt colours and text rendering modes
     to its new environment. It will share the screen palette with
     other applications which makes it possible to run the built-in
     terminal emulation in eight or sixteen colours provided that
     enough shareable screen pens are available (note:  Kickstart 3.0
     required). `term' will inherit the text font to be used for user
     interface layout from the public screen it will open its window on.

     *Note:  only the built-in terminal emulation is guaranteed to take
     advantage of pen-sharing facilities, external emulation libraries
     will most likely fail to display text correctly!*

     Take care when resizing the `term' main window as a size change
     will reset the terminal emulation.

`Public screen name'
     The name of the public screen `term' is to open windows on. `term'
     will fall back to the Workbench screen if no proper name is given
     (i.e. no name is entered) or the desired screen is unavailable.

`Screen title'
     If this button is enabled, the `term' screen will contain a
     draggable title bar, if not, the title bar will be disabled,
     leaving more space for the terminal output window.

`Window border'
     The main window will be opened on a custom screen, featuring a
     drag bar and depth gadgets.

`Separate status window'
     A separate window will be opened for the status display window.

`Status line'
     This switch allows to disable the status line display or to change
     between two alternative status line displays:

    `Disabled'
          No status line is displayed.

    `Standard'
          The standard two status lines are displayed.

    `Compact'
          A very condensed version of the status line is displayed,
          only the data is shown but no captions. The data is displayed
          in the following order:

            1. Status

            2. Terminal type

            3. Transfer protocol

            4. Baud rate

            5. Serial parameters

            6. Time of day

            7. Online time

`Online display'
     This switch determines what type of information is to be displayed
     in the bottom right corner of the status display:

    `Online time'
          The time online

    `Online cost'
          The amount of money to be paid for the connection

    `Time & cost'
          Both time and money, the display will toggle between both of
          them every five seconds.

`Colour'
     This button determines the colour mode the terminal emulation is
     going to use. Until now, four modes have been implemented:

    `4 Colours (Amiga)'
          Four colours, optionally blinking.

    `8 Colours (ANSI)'
          Eight colours, optionally blinking.

    `16 Colours (EGA)'
          Sixteen colours, as the EGA-palette, optionally blinking.

    `2 Colours (Mono.)'
          Monochrome, two colours.

`Blinking'
     If selected the VT-100 blinking option is enabled. This may
     require to allocate more colours for a specific colour mode than
     with blinking disabled, so do not be surprised if display
     performance suddenly drops like a brick.

`Palette'
     These buttons are used to select a colour of the screen palette
     that is to be changed.

`Red/Green/Blue'
     Use these sliders to modify the red, green and blue components of
     the currently active colour.

`Use default colours'
     Press this button to have the current colour palette set to the
     built-in default colours.

`Use standard pens'
     The user interface look is determined by the choice of on-screen
     rendering pens, i.e. which colour to use for highlighted text,
     active windows, inactive windows, etc. If this button is enabled
     the screen will be opened using a predefined standard set of
     drawing pens.

`Edit pens...'
     Pressing this button will open the pen panel (see Pen panel) which
     permits editing the drawing pens to use for this colour mode.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings; making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Pen panel
=========

   *This control panel is available under Kickstart 3.0 and above only.
Its functionality is not supported under previous operating system
releases!*

   The user interface look is determined by the choice of on-screen
rendering pens, i.e. which colour to use for highlighted text, active
windows, inactive windows, etc. Changing the screen colour palette also
affects the look of the user interface, this control panel permits to
compensate for such changes: even if you reverse the terminal colours
you can still retain the correct user interface look by adapting the
pens. The controls available are similar to the Workbench Preferences
editor program `Palette':

`Background'
     The screen background colour to use, by default this is colour 0.

`Text'
     The default colour to render common text, such as in control panel
     labels.

`Important text'
     The colour to draw important text in, this should put a certain
     emphasis on the text rendered so the colour should be different
     from the `Text' colour.

`Bright edges'
     The colour to use to render the bright edges of windows.

`Dark edges'
     The colour to use to render the dark edges of windows.

`Active window title bars'
     The colour to mark the currently active window and selected
     buttons and list entries.

`Active window titles'
     The colour to use when printing text over active window title bars,
     selected buttons and list entries.

`Menu background'
     The colour to render pull-down menus in.

`Menu text'
     The colour to use when printing the menu text.

`Use standard pens'
     Reset the current pen selection to default values.

`Use'
     Keep the current settings.

`Cancel'
     Return to previous settings.

Terminal panel
==============

   These settings control the basic behaviour of the terminal emulation
`term' uses. More specific emulation options are available in the
emulation window (see Emulation panel).

`Emulation'
     This is where you select the terminal emulation. Choose one of the
     following:

    `ANSI/VT-220'
          This emulation is a `melange' of three terminal command sets
          which themselves are supersets or subsets of one another. Most
          of the VT-220 command set is supported, including some
          additions made in the ANSI X3.64 specifications. With VT-220
          its subsets VT-100 and VT-102 are supported. However, not all
          the VT-52 commands are supported.

    `Atomic'
          A plain text-only terminal mode which filters out terminal
          commands and special control characters.

    `TTY'
          Also a text-only terminal mode but which displays all control
          codes and commands it cannot handle on-screen, great for
          debugging.

    `Hex'
          Another debugging mode which displays all incoming data in
          hexadecimal notation. If possible the corresponding glyphs
          will be displayed as well.

    `External'
          This enables the use of external terminal emulation libraries
          following the XEM v2.0 specifications. In this mode you need
          to specify the library to use, otherwise `term' will return to
          `ANSI/VT-220' mode.

`Emulation name'
     The name of an external terminal emulation library to be used by
     `term' instead of the built-in emulation code. Requires that the
     emulation mode is set to `External'

`Bell'
     This is where you select the action(s) `term' is to take whenever a
     `bell' character turns up in the data stream:

    `Visual'
          The screen will flash.

    `Audible'
          An audible signal will be generated.

    `Visual & audible'
          A combination of both effects.

    `Ignore'
          Nothing will happen.

    `System default'
          The system beep routines will be used.

`Alert'
     `term' notifies the user of certain events, such as a connection
     being established or a file transfer action which has just been
     finished.  This switch allows you to select the type of
     notification:

    `Bell'
          A bell signal will be given.

    `Screen'
          The `term' screen will be brought to the front.

    `Bell & Screen'
          A combination of the two actions above.

    `None'
          Nothing will happen.

`Columns'
     The number of columns to use for the terminal window. The minimum
     value is 20 columns, the maximum value is defined by the actual
     screen size.

`Lines'
     The number of lines to use for the terminal window. The minimum
     value is 20 lines, the maximum value is defined by the actual
     screen size.

`Keymap file'
     If your installation requires that `term' is to use a custom keymap
     layout, enter the keymap file name here.

     *At the time of this writing the program will not support custom
     keymap layouts with the packet window (see Packet window) due to
     operating system limitations.*

`Use emulation proc.'
     If you are bold and daring you can have an external process handle
     the terminal text output, just turn on this switch. Please note
     that the external process will consume additional memory and text
     throughput speed is likely to suffer with fragmented memory. On
     the other hand the emulation process will relieve the main program
     of the tedious task of having to process the incoming data which.
     This helps the main program to keep up with the incoming data
     stream and makes it less likely that incoming text is lost.

`Text font'
     The name of the standard or default terminal text display font.
     Please note that this font cannot be proportional-spaced.

`IBM PC font'
     The name of the font to use if the terminal is in IBM PC mode.
     Please note that this font cannot be proportional-spaced.

`Font'
     Here the type of the font to be used for text display in the
     terminal window can be selected:

    `Standard'
          The standard text font selected under the `Text font' settings
          in this control panel.

    `IBM PC style'
          A font similar to the IBM PC text font will be used. No
          matter how the translation tables (see Translation panel) are
          configured, outgoing Amiga characters are translated into PC
          character values. The terminal window will use the font
          selected under the `IBM PC font' settings in this control
          panel.

    `IBM PC style (raw)'
          This selection has very much the same effect as `IBM PC
          style' but no character translation is performed. The terminal
          window will use the font selected under the `IBM PC font'
          settings in this control panel.

`Send CR'
`Send LF'
     These buttons determine the sequences that are sent to the remote
     if a carriage return (CR) or line feed (LF) character is to be
     transmitted.  Both characters serve as end-of-line indicators.

    `-'
          The character is suppressed.

    `<<CR>>'
          A carriage return character is sent.

    `<<LF>>'
          A line feed character is sent.

    `<<CR>><<LF>>'
          A sequence of two characters (carriage return followed by
          line feed) is sent.

    `<<LF>><<CR>>'
          A sequence of two characters (line feed followed by carriage
          return) is sent.

`Receive CR'
`Receive LF'
     These two buttons have largely the same effect as the `Send CR/LF'
     buttons, they are different in that they affect the incoming data
     rather than the data transmitted.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Emulation panel
===============

   The buttons found here allow you to change the internal parameters of
the selected emulation.

   The following text only describes the parameters to change when using
the built-in terminal emulation; if an external terminal emulation is in
effect, this menu will conjure up the corresponding parameters menu as
supported by the external terminal emulation module.

`Cursor keys'
     If in `applications mode' the cursor keys will cause a control
     sequence to be transmitted instead of a cursor move event. This
     mode is usually activated by special applications on the remote
     side.

`Lock cursor key mode'
     Certain applications may excessively change the cursor key mode
     from standard to applications mode. If you do not want this to
     happen you can forbid it by using this switch.

`Numeric keypad'
     If in `applications mode' the numeric keypad will cause a control
     sequence to be transmitted instead of the characters indicated by
     the key labels.  This mode is usually activated by special
     applications on the remote side.

`Lock keypad mode'
     Certain applications may excessively change the keypad mode from
     standard to applications mode. If you do not want this to happen
     you can forbid it by using this switch.

`Swap `Backspace' and `Del' keys'
     If this switch is in effect the backspace and delete key codes are
     swapped. *This also applies to sequences such as `Control + H'
     which will produce a delete character instead of a backspace
     character.*

`Wrap cursor moves'
     According to the VT-100 specifications the cursor movements have
     to stop at the edges of the screen. In spite of this the cursor
     may leave these borders, especially in ANSI-mode, and may appear
     at the other side of the screen. This button activates a more
     `tolerant' mode.

`Wrap characters'
     This function activates the automatical carriage return function
     which is triggered as soon as the cursor crosses the right screen
     margin. To avoid unpleasant side-effects, this switch should be
     activated all the time.

`Lock line wrapping'
     If this switch is enabled, any requests to change the end of line
     text wrapping mode will be rejected.

`Insert mode'
     Normally, `term' is in overwrite-mode (characters entered
     overwrite the contents of the screen). If this gadget is
     activated, typed characters are inserted by pushing all the
     characters right of the cursor towards the right margin.

     *The insert-mode does only work for lines. If characters are
     pushed out of the screen they cannot be restored.*

`New-line mode'
     This gadget activates a special mode in which some VT-100 control
     sequences cause `term' to perform a linefeed instead of clearing
     the screen or other serious changes of the contents of the screen.

``CLS' resets cursor position'
     As per the VT-100 specs, the control sequence to clear the screen
     is not to change the current cursor position. However, several
     applications expect it to be moved to the top left corner of the
     screen. This button will activate this behaviour.

`Printer control enabled'
     `term' supports the standard VT-220 printer control commands. If
     you do not want the remote application to play with the printer
     the corresponding support commands can be disabled with this
     switch. If disabled `term' will act like a VT-220 terminal with no
     printer attached.

`Lock text style'
     If this switch is enabled, any requests to change the text
     rendering attributes (underlined, highlight, blinking, inverse)
     will be rejected.

`Lock text colour'
     If this switch is enabled, any requests to change the text
     rendering colour will be rejected.

`Font scale'
     VT-100 offers several different sizes of fonts. Some can be
     selected with this gadget:

    `Normal'
          The normal height of the font.

    `Half width'
          Half width of font.

     The special size characters are produced in real-time, so text
     output may be slightly slowed.

`Lock font mode'
     If this switch is turned on, any terminal commands to change the
     font scale will be ignored.

`Scrolling'
     This button selects one of two different scrolling modes: smooth or
     jumping.

`Destructive backspace'
     Determines if the `Backspace' code, which will delete the character
     left from the cursor, only moves the cursor to the left or removes
     the character from the screen. `Off' turns this feature off,
     `Overstrike' clears the character below the cursor and `Shift'
     shifts the line contents to the right of the cursor to the left.

`Answerback message'
     The text to send across the serial line whenever an `ENQ'
     character is received. The text is - as usual - a command sequence.

`Max. prescroll'
     This is where you set the maximum number of lines the terminal
     emulation will scroll the screen contents up in one single `jump'.
     This feature is often referred to as `prescroll'.  *Note: the data
     throughput rate plays an important part when counting the number
     of lines to scroll. The higher the rate, the more lines will be
     scrolled.*

`Max. scroll jump'
     Here is where you set the number of lines to move the screen
     contents up when the cursor moves beyond the last terminal screen
     line.

`Use standard pens'
     The built-in terminal emulation makes use of up to sixteen text
     rendering pens and four text rendering attributes. For each colour
     mode supported (see Screen panel) a specific pen order and text
     attribute assignment is predefined. You can select your own pen
     order and attribute assignment if this switch is not enabled by
     pressing the button labeled `Edit pens...'.

`Edit pens...'
     Pressing this button will open the text pen panel (see Textpen
     panel) which permits editing the drawing pens to use for this
     colour mode.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Textpen panel
=============

   For each colour mode (monochrome, 4, 8, 16 colours) the terminal
emulation uses a specific order of text pens and text attribute
assignments.  The text pens determine which text rendering colours to
use. The text attribute assignments define how blinking, inverse,
underlined and highlighted text should be displayed. This control panel
is divided into two parts. One part serves to select the text pens, the
other part will let you assign the text attributes. At the left hand
side of each control you will find a label which indicates the
emulation's default value.

   There is a limitation in the number of text colour you can choose.
While there is a colour mode which makes use of 16 colours, only a
maximum of eight colours can be selected. The reason for this
limitation is found in the terminal control commands which allow for
only eight colours (0-7). The remaining eight colours (8-15) are
selected via a text rendering attribute, known as `highlight'.  This
means, if text is to be printed in colour 7 and the highlight text
rendering attribute is enabled the text will be printed in colour 15.
The `highlight' text rendering attribute always has a special meaning.
In all colour modes except 16 it causes text to be output in boldface.

`Drawing pens'
     Here you select the text drawing pen order to use.

`Attributes'
     Here you select which text rendering attribute to use instead of
     the default. You can also choose to disable an attribute.

Clipboard panel
===============

`Clipboard unit'
     The clipboard supports several units (0-255) which can be accessed
     independently. It can make sense to change this value but
     generally you will probably leave it as unit `0'.

`Paste prefix'
     If enabled, the text to send before the clipboard contents are fed
     into the input stream, see Clipboard.

`Paste suffix'
     If enabled, the text to send after the clipboard contents are fed
     into the input stream, see Clipboard.

`Text pacing'
     The mode to determine how text is sent to the remote:

    `Direct'
          Each line will be sent without any delay.

    `Wait for echo'
          The program will wait for each single character sent to be
          echoed by the remote.

    `Wait for any echo'
          The program will wait for the remote to return any character
          in response to any character sent. Typically, this is the case
          with password prompts issued by BBSes.

    `Wait for line prompt'
          The program will wait until the remote sends a certain line
          prompt text.

    `Character/line delay'
          The program will respect the character/line delay values to
          be set using this control panel.

    `Keyboard delay'
          The program will send character separated by a delay to be
          determined by the current system keyboard repeat delay.

     *Note: the `echo' text pacing modes are to be used with greate
     care. Certain online services do not echo characters back to the
     sender as they run only in half-duplex mode.  On the other hand
     most BBS programs will not echo certain characters, such as escape
     codes, etc.*

`Character delay'
     When sending text this number determines how many seconds to wait
     before sending the next character.

`Line delay'
     When sending text this number determines how many seconds to wait
     before sending the line-termination character (carriage return).

`Line prompt'
     The character(s) to wait for the receiver to issue after a line of
     text is send. This text may include control sequence tokens.

`Send timeout'
     If the `Text pacing' mode is set to  `Wait for echo' or `Wait for
     line prompt' the maximum time to wait for echo/prompt before the
     insertion is aborted.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Capture panel
=============

`Log actions'
     If enabled will write a protocol of each program action (uploads,
     downloads, dial attempts, etc.) to a file. Each action is listed
     along with time and date. Carrier-lost events will also note the
     approximate cost of the call. The log file created by this
     function is *not intended* for postprocessing via call-log file
     analyzers. Use the `Log calls' feature for this purpose.

`Log file'
     The name of the file in which the information on the actions
     executed by `term' will be stored if `Log actions' is enabled.

`Log calls'
     If this switch is enabled, `term' will create call-log files in a
     format compatible with the `CallInfo' program. Sometimes this
     format is referred to as `NComm format'.

`Call log file'
     The name of the file in which the information on calls made by
     `term' will be stored if `Log calls' is enabled.

`Enabled'
     This switch works in conjunction with the `Freeze buffer' menu
     entry (freezing the text buffer contents). In fact, the menu entry
     is adjusted according to the configuration settings whenever a new
     configuration is invoked (that is, whenever a new connection is
     made through the dialing panel or at program startup time). *`term'
     will only freeze the buffer if this switch is set, it will leave
     the buffer state (frozen or not) untouched if this switch is not
     enabled.*

`Max. size'
     To save memory, a high-water mark concerning the maximum amount of
     memory the text buffer (see Text buffer) will allocate for text
     may be specified.  The minimum value to be entered here is 2,000
     bytes which are roughly equivalent to two text buffer pages of
     text. A value of 0 will cause the text buffer to always allocate
     as much memory as required to buffer all the incoming text.

`File path'
     The path the file requester will bring up when saving the contents
     of the text buffer.

`Buffer line width'
     The text buffer stores lines at a fixed size, this slider
     determines the maximum line width.

`Conn.-auto-capture'
     If enabled will automatically open a capture file after
     successfully making a connection. Any other already open capture
     file will be closed before proceeding. The files created will bear
     the names of the corresponding phonebook entries.

`Filter enabled'
     If selected, command sequences are filtered out before the incoming
     characters are captured to disk or printer. This makes good sense
     with noisy lines generating random characters which might scare
     your printer. It also produces a text file that is much more
     readable than with all the control sequence codes cluttering up
     the text.

`Convert characters'
     This switch works in conjunction with the `Filter enabled' option.
     When using the `IBM PC style' terminal font, `term' receives
     characters which normally do not have a place in the standard
     Amiga character set. If the `Convert characters' switch is
     enabled, these characters will be converted into their Amiga
     equivalents, if there are any, before they go into the capture
     buffer. Note that this character conversion is always enabled for
     text captured to the printer.

`Creation date'
     By default `term' will append the date of the call made to the
     name of the auto-capture file created (`Add to name').
     Alternatively, `term' will leave the name untouched and store the
     creation date within the file (`Write to file').

`File path'
     This text gadget contains the path in which the the capture files
     will be created if `Connect-auto-capture' is enabled.

`Open window'
     This switch controls which part of the text buffer contents the
     review buffer window will display when opened:

    `Top'
          Displays the top of the buffer contents.

    `End'
          Displays the end of the buffer contents.

`Remember position'
     If this switch is in effect, the program will remember the text
     display position between calls rather than jumping to the top or
     the end of the text buffer.

`Open screen'
     This switch controls which part of the text buffer contents the
     review buffer screen will display when opened:

    `Top'
          Displays the top of the buffer contents.

    `Remember'
          Keeps the previous buffer position.

    `End'
          Displays the end of the buffer contents.

`Remember position'
     If this switch is in effect, the program will remember the text
     display position between calls rather than jumping to the top or
     the end of the text buffer.

`Screen position'
     The buffer screen will usually not be quite as wide as the system
     overscan settings permit. This switch determines the horizontal
     placement of the screen:

    `Left'
          The screen will be left-edge aligned.

    `Centre'
          The screen will be centred.

    `Right'
          The screen will be right-edge aligned. This will bring the
          screen depth arrangement gadget in line with the other
          screens.

`Display mode'
     This is where you choose the screen display mode the buffer screen
     should use.

`Search history size'
     The text buffer search function maintains a backlog of all the
     search text entered. The number of texts to remember, before the
     oldest is discarded, can be set using the `Search history size'
     control. In the search text entry field you can use the `Cursor
     up' and `Cursor down' keys to scroll through the previously
     entered search strings.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Command panel
=============

   Here you will find entries for four command sequences which serve
four functions:

`Startup command'
     At the beginning of every session with `term' and after a
     connection has been established by the dialing routine a
     command-sequence is executed.  Do not use this command for
     auto-login scripts and such, this is what the `Login command' is
     for. Note that the dialing procedure executes the `Startup
     command' after the `Login command'.

`Login command'
     This command will be executed immediately after the dialing
     procedure has established a connection. You should use this
     command for login scripts and such. Note that the dialing
     procedure first executes the `Login command' and then the `Startup
     command'.

`Logoff command'
     The command to execute when the line is hung up or the carrier
     signal is lost.

`Upload command'
     `term' will execute this command after a successful upload has
     been made.

`Download command'
     `term' will execute this command after a successful download has
     been made.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Miscellaneous panel
===================

   This is the place where options can be set which would not fit into
other control panels

`Backup configuration'
     By default the local program configuration saved along with a
     phonebook entry will replace the global configuration as soon as a
     successful connection is made. If this switch is enabled, `term'
     will remember the global configuration in effect before the
     configuration data of a phonebook entry is adopted. As soon as the
     serial driver loses track of the carrier signal or the user
     chooses to hang up the line, `term' will restore the previous
     global configuration.

`Show fast! macros'
     If this switch is enabled, the fast macro window (see Fast macro
     panel) will be opened whenever the current configuration becomes
     active (e.g. at startup time). Please note that if this switch is
     not enabled, this does not cause the fast macro window to be
     closed.

`Release serial device when iconified'
     By default the serial device driver is released when `term' is
     iconified. Unfortunately, some modems drop the line when the
     device is closed so this switch allows you to keep the link.

`Override transfer path'
     Each batch file transfer protocol allows you to specify the name
     of the directory to place the files it receives in. By default
     `term' will redirect the files to a directory to be specified in
     the path panel (see Path panel). If this switch is disabled, the
     internal settings of the current transfer protocol will be used.

`Use auto upload panel'
     Some users found the so-called `ZModem auto-upload panel' to be
     invoked whenever `term' encounters the ZModem inquiry sequence
     rather disturbing, this switch will allow them to disable this
     feature.

`Set `archived' bit'
     If enabled, this switch will cause `term' to mark files uploaded
     as `archived'.

`Transfer file icons'
     This switch works in conjunction with the drag & upload feature
     (see Transfer progress panel). By default, `term' will upload only
     the files whose icons are dragged on the main window. If this
     switch is in effect the icon files will be transferred as well.

`Transfer performance meter'
     When a file transfer is running, `term' may optionally display the
     file transfer performance in a small resizable window. The lines
     drawn represent the following information:

    *Black line
          This line displayes the current transfer performance (usually
          heavily oscillating).

    *Blue line
          This line displays the average transfer performance.

    *White line
          This line displays the smallest transfer performance (should
          be constant during the transfer).

`Create icons'
     If this switch is in effect `term' will try to provide icons for
     all files it receives. The following file types (and the
     corresponding icon files) are supported:

    *Text file
          icon `ENV:sys/def_text.info'

    *Sound file
          icon `ENV:sys/def_sound.info'

    *Picture file
          icon `ENV:sys/def_picture.info'

    *Tool
          icon `ENV:sys/def_tool.info'

    *Archive file
          icon `ENV:sys/def_archive.info'

    *Preferences file
          icon `ENV:sys/def_pref.info'

    *Other file types
          icon `ENV:sys/def_project.info'

     Text and pictures saved by the program will also get icons
     attached.

`Simple file I/O'
     This switch controls whether `term' is to use double-buffered file
     management routines or not.

`Hide upload icon'
     The file upload panel can be invoked by double-clicking on the
     corresponding icon placed in the Workbench window (see File upload
     panel). If you do not want the icon to apear, turn on the `Hide
     upload icon' switch.

`Program priority'
     Use this slider to determine the priority under which the `term'
     main process is to operate. Adjusting this value can make `term'
     perform more reliably in a system which experiences heavy task
     loading. It is recommended to experiment with this value until a
     satisfactory state is found.  Setting the program priority too
     high or too low may affect the performance of coprocess services
     such as the double-buffered file I/O routines.

`File comment'
     This is where the action to perform on downloaded files can be set:

    `Ignore'
          The file comment will not be touched.

    `File type'
          The file will be examined and a guess will be made which type
          of file it is. The file comment will be set to the name of
          the file type.

    `Source and time'
          The current BBS name and the time the file was received are
          placed in the file comment.

`I/O buffer size'
     This slider controls how much memory the double-buffered file
     management routines will allocate for each buffer. This means a
     value of 4096 bytes will result in an allocation of 8192 bytes in
     total.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Path panel
==========

   In this part of the settings all paths, which `term' uses to save or
load any data, can be determined.

`...Uploadpath'
`...Downloadpath'
     The directories in which the functions contained in the `Transfer'
     menu will search and create files.

`Configuration storage directory'
     The directory that will contain all configuration files (phonebook,
     macro keys, etc.). The default configuration file is called
     `term.prefs' and will be searched in the path defined by the
     enviroment variable `TERMCONFIGPATH' (see Environment variables).

`Default text editor'
     Contains the name and search path of the editor used by `Edit &
     upload text file' in the transfer menu (see Transf.).

``term' help text file'
     This is where the name of the online-help text file is stored. By
     default this is `PROGDIR:term.guide'.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

Transfer panel
==============

   This is where the libraries to be employed for file transfers are to
be selected.

`Default transfer library'
     This library will be active most of the time, unless a special
     library is temporarily enabled. Auto-downloads and auto-uploads
     will be handled by this library, even if you select a text
     transfer in the auto-upload panel.

`Mangle filenames for upload'
     Certain transfer protocols running under MS-DOS get into serious
     trouble if told to receive files with names which do not match the
     local naming scheme (8 characters for the name + "." + 3
     characters for the extension). For example, in such situations
     ZModem will restart the file transfer over and over again in a row
     without getting anywhere. To steer clear of trouble you can turn
     on the `Mangle filenames for upload' switch which will cause the
     file transfer protocol to report `condensed' file names to the
     remote receiver.  A special algorithm will shrink the file names
     to the MS-DOS file name template, clearing potentially dangerous
     character combinations on the fly. *Note: the algorithm may map
     two different Amiga file names to the same MS-DOS file name, so
     watch out!*

`Notify user after <n> errors have occured'
     Here you select after how many file transfer errors you want to be
     notified. The errors are counted separately for each file. When the
     given number of errors have accumulated, an error notification
     sound will be played. Setting this value to 0 suppresses this
     feature.

`Notify user'
     This switch controls when the file transfer window should be
     brought the front and a notification sound should be played:

    `only when an error occurs'
          The `term' screen and the file transfer window will stay in
          the background until a serious problem occurs.

    `when transfer begins/ends'
          Screen and window will be brought to the front at the
          beginning and at the end of a transfer.

    `when transfer begins'
          Screen and window will be brought to the front at the
          beginning of a transfer.

    `when transfer ends'
          Screen and window will be brought to the front at the end of
          a transfer.

`ASCII upload library'
     The XPR library to be used when sending plain ASCII text as
     triggered by seleting the `Upload ASCII file(s)' menu item. This is
     usually `xprascii.library'. If no name is given, the `Default
     transfer library' will be used.

`Use built-in upload routine'
     Instead of the ASCII upload library `term' will use the built-in
     routines.

`ASCII download library'
     The XPR library to be used when receiving plain ASCII text as
     triggered by selecting the `Download ASCII file(s)' menu item.
     This is usually `xprascii.library'. If no name is given, the
     `Default transfer library' will be used.

`Use built-in download routine'
     Instead of the ASCII upload library `term' will use the built-in
     routines. Incoming text will be received in a fashion similar to
     the capture and review buffer functions, but no filtering, etc.
     will be performed. As the download routine cannot always tell when
     all the data to be received has arrived, you may need to stop the
     download by hand.

`Text upload library'
     The name of the XPR library to be used when selecting the menu
     item `Upload text file(s)'. If no name is given, the `Default
     transfer library' will be used.

`Text download library'
     The name of the XPR library to be used when selecting the menu
     item `Download text file(s)'. If no name is given, the `Default
     transfer library' will be used.

`Binary upload library'
     The name of the XPR library to be used when selecting the menu
     item `Upload binary file(s)'. If no name is given, the `Default
     transfer library' will be used.

`Binary download library'
     The name of the XPR library to be used when selecting the menu
     item `Download binary file(s)'. If no name is given, the `Default
     transfer library' will be used.

`Use'
     Use the current settings.

`Default (phonebook only)'
     Drop the current settings, making a connection to the corresponding
     phone number will leave the corresponding main configuration entry
     unchanged.

`Cancel'
     Keep the old settings.

   Settings for each transfer library are saved in text files in the
`ENVARC:' and `ENV:' drawers.

   Leave the default transfer library set to the one you intend to use
most.

XPR options sample
==================

   You will find an excerpt of the `xprzmodem.doc' documentation file
for the ZModem file transfer protocol below which is the default
transfer protocol `term' is shipped with. Please note that other file
transfer protocols will sport different options and controls, you
should consult the corresponding documentation for more information.

`Text translation mode:'
    `Y = Text Yes'
          If receiving, translate CR/LF pairs or solo CR chars to
          normal Amiga LF chars.  Ignore data past ^Z. If sending,
          suggests to receiver that they should receive this file in
          text mode.

    `N = Text No'
          Receive file verbatim, without changes.  If sending, suggest
          to receiver that they receive this file verbatim, without
          translations.

    `? = Text status unknown'
          If receiving, use sender's suggestion as to whether to do end
          of line translations or not. If sending, tell receiver to use
          default mode, since we don't know either.

    `C = Text mode set by Comm program'
          The library asks the communications program whether or not to
          use Text mode for each file. If the communications program
          does not support the necessary `xpr_finfo()' call, or if the
          call fails, this option acts like T?.  From the user's point
          of view, what this option normally does is set the Text mode
          to match the communications program's built-in
          text/binary/end-of-line/translation mode, if any.

`Overwrite mode:'
    `Y = Overwrite Yes'
          If about to receive file with same name as one which already
          exists, delete the old file and receive the new file in its
          place.

    `N = Overwrite No'
          If about to receive file with same name as one which already
          exists, append ".dup" onto the name of the new file to keep
          them separate.

    `R = Overwrite Resume'
          If about to receive file with same name as one which already
          exists, resume receiving file data from the current end of
          the existing file.

    `S = Overwrite Skip'
          If about to receive file with same name as one which already
          exists, skip this file, we don't want it.  Batch transfers
          will move on to the next file in the set, if any.

`Buffer size:'
     `xprzmodem.library' adds a layer of file I/O buffering in addition
     to whatever the comm program may or may not provide.  This option
     sets the size of XPRZModem's file I/O buffer in kilobytes.  The
     minimum value is 1 KB, for those using RAM drives or fast hard
     drives, or those whose comm programs already provide sufficient
     buffering.  The maximum value is as much contiguous RAM as you
     have available in your Amiga.  If you specify more than is
     actually available, XPRZModem will keep decrementing the buffer
     size requested by 1 KB until the memory allocation works.  That
     way, if your RAM is too fragmented to use the amount you request,
     XPRZModem simply uses the largest block available.  Buffering is
     especially helpful for floppy drive users; it keeps your drive from
     continuously gronking and slowing things down all through the
     transfer.

     *Additional note for `term' users: this option is practically
     replaced by the `I/O buffer size' settings in the miscellaneous
     panel (see Miscellaneous panel).*

`Frame size:'
     Although normally avoided, ZModem has the ability to require an
     ACK to be sent from the receiver to the sender every X-many data
     bytes.  Normally you don't want to use this feature, because not
     waiting for ACKs is part of how ZModem works so fast.  However,
     this feature can be very useful in conjunction with file I/O
     buffering on slow devices (namely those floppy drives).  If you
     set up a large I/O buffer to avoid gronking your floppy so often,
     you'll find that when the buffer finally *does* get around to
     being flushed that it can take a looonng time; so long, in fact,
     that the delay can cause timeouts and errors.  But if you set your
     ZModem to require the sender to wait for an ACK every
     buffer's-worth of data, the sender will politely wait for you to
     flush your buffer to the slow floppy and send it an ACK saying
     it's OK to continue now.  This value should be set to 0 to disable
     ACKs (normal mode), or set it to the actual number of data bytes
     allowed between ACKs.  For example, if you set the Buffer size to
     64KB because of your floppy, you should also set the Frame size to
     65536 bytes.

`Error limit:'
     This allows you to set the number of sequential errors which will
     be required to convince ZModem to abort the transfer.  The normal
     value is 10, meaning that 10 errors must happen in a row with no
     valid data being transferred in order to cause an abort.  This
     setting is provided for those using XPRZModem with a BBS, who may
     wish to use a relaxed setting, or those with really lousy phone
     lines who are desperate and patient enough to want the transfer to
     continue in spite of horrible performance.

`Auto-activate mode:'
    `Y = Auto-activate Yes'
          If the comm program supports the ability, the library will
          automatically go into receive mode when the start of a ZModem
          download is detected.

    `N = Auto-activate No'
          Don't try to automatically start downloading, make the user
          activate it.

`Delete after sending:'
    `Y = Delete Yes'
          Delete each file after it has been Successfully sent.

    `N = Delete No'
          Don't delete files after sending them.

`Keep partial files:'
    `Y = Keep Yes'
          Keep the fragment of a file received so far if file reception
          is aborted.  This allows you to use the Overwrite Resume
          option above to pick up where you left off on your next
          attempt.

    `N = Keep No'
          Delete any partially-received file after an aborted transfer.

`Send full directory path:'
    `Send path Yes'
          Send full filenames including directory path to receiver.

    `Send path No'
          Send only simple filenames, not including directory path.

`Default received path:'
     Store all received files in this directory, if option "Use
     received path" is not checked.  Ignored entry if option `Use
     received path' is checked.  The path can be any valid existing
     directory, with or without trailing `/' (e.g. `df0:', `Comm:hold',
     etc.).

     *Additional note for `term' users: the default received path option
     is ignored if the `Override transfer path' switch in the
     miscellaneous panel (see Miscellaneous panel) is enabled.*

   You will also find the familiar `Use' and `Cancel' buttons here which
will either keep or discard the changes you made to the settings.

Translation panel
=================

   `term' is capable of replacing any incoming and outgoing character
with custom text. This may come in handy with the numerous incarnations
of the dreaded IBM PC font. The control panel to be opened features a
large list of buttons, each single one representing a single character.
Some characters are shown with their corresponding glyphs, some with
their symbolic names and some as plain numbers. Clicking on one of the
buttons will bring up a control panel which allows setting the text to
be received by the terminal emulation when a certain character is
received and the text to be sent when a certain characters is
transmitted. Alternatively, you can press the key combination
corresponding to the character whose translation you wish to change.

   Both receive and send translation texts can consist of standard
command sequences (see Command sequences), except for the following
commands which are not supported:  `\a', `\c', `\d', `\g', `\i', `\p',
`\u' and `\x'.

   Please note that the translation does not come for free, terminal
input and output speed may suffer.

   As of this writing only a few translation table files (see below) are
included in the distribution. If you wish to create translation tables
for IBM doorway mode, national IBM PC style font variants, etc. feel
free to send them to me. I will try to include them in the next `term'
release.

   Currently included in the `term' distribution are the following
translation table files:

`ISO-4-(GB).prefs'
     British 7 bit (ISO code 4) character set.

`ISO-10-(S).prefs'
     Swedish 7 bit (ISO code 10) character set.

`ISO-11-(S).prefs'
     Swedish 7 bit (ISO code 11) character set.

`ISO-15-(I).prefs'
     Italian 7 bit (ISO code 15) character set.

`ISO-16-(P).prefs'
     Portuguese 7 bit (ISO code 16) character set.

`ISO-17-(E).prefs'
     Spanish 7 bit (ISO code 17) character set.

`ISO-21-(D).prefs'
     German 7 bit (ISO code 21) character set.

`ISO-60-(N).prefs'
     Norwegian 7 bit (ISO code 60) character set.

`ISO-61-(N).prefs'
     Norwegian 7 bit (ISO code 61) character set.

`ISO-69-(F).prefs'
     French 7 bit (ISO code 69) character set.

`PC-8.prefs'
     Character translation for standard IBM PC style font. If you wish
     to use these translation tables, make sure to set the `Font' type
     in the terminal panel (see Terminal panel) to `IBM PC style (raw)'.

   Unfortunately, there is no translation available for the Norwegian
and Danish variants of the PC-8 character set as I do not yet have a
fitting Amiga font available. Similar reasons have yet prevented to
implement PC-850 character set support.

Function key panel
==================

   This control panel allows setting user definable texts for all ten
function keys. All texts are considered command sequences (see Command
sequences), a topic which will be covered later in this document.

`Modifier'
     All in all 40 keys may be covered with user defined command
     sequences (Command sequences). As the Amiga keyboard only has ten
     function-keys this button switches between the modifier keys
     (`Shift', `Control', `Alt') which, if pressed in addition which a
     function key, will execute one of the 40 command sequences.

`Load'
     Load the function key settings from a file.

`Save'
     Save the function key settings to a file.

`Use'
     Use the current settings.

`Cancel'
     Keep the old settings.

   As the definition of the function keys with command sequences
contradicts the standard definition of the four functions keys of a
VT-100 terminal, the keys `F1'-`F4', which may be executed by pressing
the `Shift' key and the approriate function-key simultaneously, are
mapped to the standard sequences for function-keys.  The user may - of
course - change these settings.

   If an external terminal emulation happens to be active, those
function keys the emulation has allocated for itself will be disabled
and cannot be edited.

   The traditional VT-100 PF-keys (programmable function keys) are
mapped to the top row of the numeric keypad. Hold down the `Control'
key and press a top row key to produce the corresponding PF key code.

Cursor key panel
****************

   This control panel both works and looks similar to the function key
panel (see Function key panel), the only difference is that it is to
assign command sequences to the cursor keys rather than to the function
keys. Displayed are the assignments for all four cursor keys and the
following buttons:

`Modifier'
     Any cursor key can be pressed along with one of the modifier keys
     (`Shift', `Control', `Alt'). This button will switch between the
     different assignments.

`Load'
     Load the cursor key settings from a file.

`Save'
     Save the cursor key settings to a file.

`Use'
     Use the current settings.

`Cancel'
     Keep the old settings.

Fast macro panel
================

   The design and implementation of the settings to be configured in
this menu are closely related to the menu entry function key panel (see
Function key panel) discussed before. The only difference to be seen in
the fact that the fast! macros are mapped to buttons rather than
function keys (more on this topic later in this document, see Fast!
macros).

`Macro list'
     The list of macros entered yet, to edit one of these, select it by
     clicking the mouse button with the mouse pointer on it.

`Macro'
     The name of a macro by which it is listed in the fast! macro list.

`Macro text'
     The command sequence (see Command sequences) associated with a
     fast! macro. Command sequences are discussed later in this
     document.

`New'
     Appends a new macro to the list. The user may then select and
     customize it.

`Remove'
     Removes the currently selected macro from the list.

`Clear'
     Removes all the macros from list, clearing it.

`Load'
     Loads the macro list from a file.

`Save'
     Saves the macro list to a file.

`|<'
     Places the currently selected macro at the top of the list.

`<'
     Moves the currently selected macro one entry up.

`>'
     Moves the currently selected macro one entry down.

`>|'
     Places the currently selected macro at the end of the list.

Hotkey panel
============

   This is where the key sequences used to arrange screens and to
execute special functions are to be configured.

`term screen to front'
     The keys to press to bring the `term' screen to the front.

`Buffer screen to front'
     The keys to press to bring the screen of the text buffer to the
     front.

`Skip dial entry'
     As an alternative to the `Skip' button, pressing these keys will
     skip a dialing entry if the dialing function is currently active.

`Stop ARexx command'
     An ARexx script started from within `term' can be aborted by
     pressing these keys. Use this function only if pressing `Control +
     C' does not stop the program execution.

`Commodity priority'
     The commodity priority to assign this task to. You may want to
     change this value if you have more than one program running which
     uses the same key sequences as `term'. The program with the higher
     commodity priority will receive the keystrokes first.

`Hotkeys enabled'
     Whether the hotkeys are enabled or not can be toggled by clicking
     on this button, or by using the `Exchange' program to be found in
     the `Tools/Commodities' drawer.

`Load'
     Loads the hotkey settings from a file.

`Save'
     Saves the hotkey settings to a file.

`Use'
     Use the current settings.

`Cancel'
     Keep the original settings.

   `term' will refuse to accept invalid keyword combinations. You will
be notified by a brief screen flash/bell signal and the cursor will
reappear in the text entry field whose contents are rejected.

Speech panel
============

   If enabled, the Amiga speech synthesizer will be used to alert the
user of certain actions, such as carrier lost, connection made, etc.
This feature makes sense if `term' is running in the background where
the user cannot see what is actually happening on the main screen. By
default this feature is disabled.

   *Note: speech synthesis is no longer available since Workbench v2.1
was introdured!*

`Rate (words/minute)'
     Speaking speed in words per minute.

`Pitch (Hz)'
     The greater this value, the higher the voice appears to be
     speaking.

`Frequency (Hz)'
     Voice frequency in Hertz.

`Volume'
     The volume of the voice in percent.

`Sex'
     Enabled female or male voice.

`Speech enabled'
     Toggles the activity of the speech synthesizer.

`Speak!'
     Speaks a small sample text, note that speech must be enabled for
     this function to work.

`Load'
     Loads the speech settings from a file.

`Save'
     Saves the speech settings to a file.

`Use'
     Use the current settings.

`Cancel'
     Keep the original settings.

Sound panel
===========

   As an option `term' will associate sounds with special program
functions and events. This is where the sounds are configured:

`Terminal bell sound'
     The sound to be played whenever a `BEL' character is output on the
     terminal screen.

``Connect' sound'
     The sound to be played when a connection is established.

``Disconnect' sound'
     The sound to be played when a connection is lost.

``File transfer finished' sound'
     The sound to be played when a file transfer is finished
     successfully.

``File transfer failed' sound'
     The sound to be played when a file transfer is finished
     unsuccessfully.

`Modem `ring' sound'
     The sound to be played when the modem detects a call by a
     different modem.

`Modem `voice' sound'
     The sound to be played when the modem detects a phone call.

`Error sound'
     The sound to be played when a number of file transfer errors have
     occured (see Transfer panel).

`Volume'
     This slider affects the volume of all sounds produced by `term'.
     Setting it to zero suppresses sound output.

`Preload sound files'
     If this switch is enabled `term' will load all sound files
     immediately rather than accessing and loading them on demand. This
     may save access time when a sound is to be played but may eat up
     precious memory.

`Load'
     Load the sound settings from a file.

`Save'
     Save the sound settings to a file.

`Use'
     Use the current settings.

`Cancel'
     Keep the old settings.

   There is no fixed size limit to sound files, the amount of available
system memory matters. The sound files may be compressed, mono or
stereo files.

   As of Workbench 2.04 `term' will only load plain IFF-8SVX format
sound files. With Workbench 3.x any sound file can be loaded for which
there exists a datatypes class. Please note that due to an operating
system bug sound files larger than 102,400 bytes will not play
correctly under Workbench 3.0.

Transfer progress panel
=======================

   The transfer routines open an information window in which a number of
transfer parameters are displayed. Additionally, the file transfer can
be aborted by clicking either of the three buttons (`Stop entire
transfer', `Skip current file' or `Stop transfer batch').  *For most
transfer protocols all buttons have the same effect.* Consult the
documentation to see if different levels of abort are supported by your
favourite transfer protocol.

   The following information is displayed in the transfer window:

`Protocol'
     The name of the transfer protocol currently running.

`Information'
     A list to contain error message, the names files transferred and
     miscellaneous other messages addressed to the user. Error messages
     are printed in a special colour.

`File'
     The name of the file being transferred.

`Next file'
     The name of the next file to be sent.

`Space left'
     The space left on the destination device. `term' will try to
     calculate the number of blocks the file being received will take
     on the destination device and display a warning the file in
     question is probably not going to fit.

     *Caution: `term' only makes a very likely guess which may or may
     not come true. The guess may be wrong if the destination device
     happens to be a kind of Ram-Disk which shrinks and expands as
     memory requirements come and go. Such devices are usually 100%
     full. In most other cases you will probably be able to make room
     for the file being received before any space problem turns up.*

`Completion time'
     If the corresponding information is available, the point of time
     when the current file will be transferred completely.

`File size'
     If available, the size of the file.

`Bytes xfered'
     Number of bytes transferred yet.

`Total size'
     The total size of all files to be transferred.

`Total bytes xfered'
     The total number of bytes transferred yet.

`Files xfered'
     The number of files transferred yet and the number of files to go.

`Blocks xfered'
     Number of data blocks transferred yet.

`Characters/second'
     The effective transfer speed in characters per second.

`Character delay'
     The delay between two character being sent.

`Packet delay'
     The delay between two packets being sent.

`Packet type'
     A short description of the data block type employed for data
     transfer.

`Block check type'
     The method employed to verify the integrity of the data blocks
     being transferred (this usually is a form of cyclic redundancy
     checking).

`Block size'
     Size of a data block in bytes.

`Expected time'
     The time the transfer protocol expects the transfer will take.

`Elapsed time'
     The time elapsed during transfer.

`Number of errors'
     The number of errors occured during file transfer.

`Number of timeouts'
     The number of timeouts occured during file transfer.

   If the currently active transfer protocol provides the necessary
information, two bars will be displayed at the bottom of the transfer
window indicating the amount of transferred data and of time to go
before the transfer is finished.

   `term' knows about the Z-Modem data-inquiry sequence the remote
receiver issues when expecting files. If recognized, this sequence will
cause `term' to display a requester asking for the type of data upload:
text or binary. One could call this feature `auto upload'. You also have
the opportunity to select `Abort' which will transfer the ZModem abort
sequence or to click on the `Ignore' gadget which will plainly ignore
the fact that the ZModem inquiry sequence has been recognized.  *The
Z-Modem abort sequence will also be transferred if you select the
`Cancel' button in the file requester to appear after selecting text-
or binary-upload.* If the `Upload from queue' option is in effect the
contents of the transfer queue will be uploaded.

   *Some transfer protocols will allow you to enter a default receive
path the library is supposed to create files it receives in. On request
(see Miscellaneous panel) `term' will ignore these settings and use the
settings to be changed in the `Settings/Paths' (see Path panel) menu
instead.*

   Each file that is received and which does not remain empty is
examined briefly to find out about the file type. If recognized
successfully and the corresponding feature is enabled, a small comment
indicating the file type will be attached to the file. `term' currently
knows about 83 different file types.

   If the `term' main window is opened on the Workbench screen, you can
select and drag icons on it in order to upload the corresponding files.
A requester will be opened to ask for the upload style (either binary or
text).

   In case a file transfer terminates with an unrecoverable error
(*note:  the transfer protocol is responsible for reporting error
conditions to `term'*) the file transfer window will stay open until
explicitly closed by the user so the transfer error report list can be
viewed.

ASCII-transfer panel
====================

   The built-in ASCII transfer routines as to be enabled in the
transfer panel (see Transfer panel) display transfer progress
information in a special window (note that sending and receiving will
open different windows). Here is a description of the controls and
displays:

`Bytes xfered'
     The number of bytes sent/received.

`Lines xfered'
     The number of text lines sent/received.

`Information'
     Transfer progress information and error display.

`Character delay'
     When sending text this number determines how many seconds to wait
     before sending the next character.

`Line delay'
     When sending text this number determines how many seconds to wait
     before sending the line-termination character (carriage return).

`Text pacing'
     The mode to determine how text is sent to the remote:

    `Direct'
          Each line will be sent without any delay.

    `Wait for echo'
          The program will wait for each single character sent to be
          echoed by the remote.

    `Wait for any echo'
          The program will wait for the remote to return any character
          in response to any character sent. Typically, this is the case
          with password prompts issued by BBSes.

    `Wait for line prompt'
          The program will wait until the remote sends a certain line
          prompt text.

    `Character/line delay'
          The program will respect the character/line delay values to
          be set using this control panel.

    `Keyboard delay'
          The program will send character separated by a delay to be
          determined by the current system keyboard repeat delay.

     *Note: the `echo' text pacing modes are to be used with greate
     care. Certain online services do not echo characters back to the
     sender as they run only in half-duplex mode.  On the other hand
     most mailbox programs will not echo certain characters, such as
     escape codes, etc.*

`Quiet transfer'
     This switch controls whether incoming text will be displayed in the
     terminal window. You may want to watch how the remote responds to
     the data sent/received.

`Skip current file'
     Stops sending the current file and proceeds to the next.

`Stop entire transfer'
     Stops the ASCII data transfer.

   In case a file transfer terminates with an unrecoverable error the
file transfer window will stay open until explicitly closed by the user
so the transfer error report list can be viewed.

ASCII-transfer settings
=======================

`Text pacing'
     The mode to determine how text is sent to the remote:

    `Direct'
          Each line will be sent without any delay.

    `Wait for echo'
          The program will wait for each single character sent to be
          echoed by the remote.

    `Wait for any echo'
          The program will wait for the remote to return any character
          in response to any character sent. Typically, this is the case
          with password prompts issued by BBSes.

    `Wait for line prompt'
          The program will wait until the remote sends a certain line
          prompt text.

    `Character/line delay'
          The program will respect the character/line delay values to
          be set using this control panel.

    `Keyboard delay'
          The program will send character separated by a delay to be
          determined by the current system keyboard repeat delay.

     *Note: the `echo' text pacing modes are to be used with greate
     care. Certain online services do not echo characters back to the
     sender as they run only in half-duplex mode.  On the other hand
     most mailbox programs will not echo certain characters, such as
     escape codes, etc.*

`Character delay'
     When sending text this number determines how many seconds to wait
     before sending the next character.

`Line delay'
     When sending text this number determines how many seconds to wait
     before sending the line-termination character (carriage return).

`Line prompt'
     The character to wait for the receiver to issue after a line of
     text is send. These character may include control sequence tokens.

`Send timeout'
     If the `Text pacing' mode is set to  `Wait for echo' or `Wait for
     line prompt' the maximum time to wait for echo/prompt before the
     insertion is aborted.

`Send CR'
`Send LF'
     These buttons determine the sequences that are sent to the remote
     if a carriage return (CR) or line feed (LF) character is to be
     transmitted.  Both characters serve as end-of-line indicators.

    `-'
          The character is suppressed.

    `<<CR>>'
          A carriage return character is sent.

    `<<LF>>'
          A line feed character is sent.

    `<<CR>><<LF>>'
          A sequence of two characters (carriage return followed by
          line feed) is sent.

    `<<LF>><<CR>>'
          A sequence of two characters (line feed followed by carriage
          return) is sent.

`Receive CR'
`Receive LF'
     These two buttons have largely the same effect as the `Send CR/LF'
     buttons, they are different in that they affect the incoming data
     rather than the data transmitted.

`Ignore data past terminator'
     With this option enabled the receiver will search for a
     termination character in the incoming data stream. If this
     character is found the transfer will be terminated.

`Terminator character'
     Enter the ASCII code of the terminator character to be used for
     the `Ignore data past terminator' feature here.

`Quiet ASCII transfer'
     If this switch is not enabled, the built-in ASCII upload/download
     routines will display the outgoing/incoming data in the terminal
     window. This option is to let you watch the progress of the file
     transfer, so that, for example, if the remote does not respond to
     the data you send, you may want to stop and restart the upload.

`Strip bit 8'
     If this switch is effect each character received or transmitted by
     `term' will have its high-order bit cleared.

   With ASCII uploads it is important to make sure that end-of-line
characters such as carriage return and line feed are properly set up
for the remote.  While on the Amiga it is common to end a line of text
with a line feed character, most editors and such expect a carriage
return character to be transferred. This can easily be arranged by
setting the `Send LF' switch to `<<CR>>'.

Phonebook
=========

   The functions described in the following can be found in the `Modem'
menu and relate to the menu entries `Phonebook', `Dial' and `Redial'.

   `term' is equipped with a telephone number management system, the
phonebook, which is described in the following lines.

`Name list'
     The names of all phonebook entries are displayed here.

`Name'
     Name of the last selected telephonebook entry.

`Comment'
     A comment to associate with a phonebook entry.

`Phone number(s)'
     The telephone number(s) of the last selected telephonebook entry.

     If a system supports multiple lines, the phone number of each line
     may be entered, each one separated by a vertical bar `|' character
     (example: `123456|654321' would cause the dialing routine to dial
     the numbers `123456' and `654321'). The dialing routine will
     process all these phone numbers before proceeding to the next
     phonebook entry.

     The `|' character also works for the modem init, modem exit and
     dial prefix sequences. Whenever the dialing routine dials another
     phone number from a list separated by bars, it will try to find a
     matching init/exit/dial prefix sequence. If more phone numbers are
     specified than sequences are available, it will use the last
     sequence given (an example:  a phone number may be given as
     `123456|654321|12345', the dial prefix text may be `ATDP|ATDT';
     the dialing routine will call the first number using `ATDP123456',
     the second number using `ATDT654321' and the third number, since
     no special dial prefix is available, again using `ATDT12345').

     *Note: if you do not enter a phone number you will be unable to
     use the entry for dialing.*

`Quick menu'
     If this switch is in effect, the corresponding phonebook entry will
     be put into the `quick dialing menu' (see at the right hand side
     of the main menu). Selecting the menu entry will dial the
     corresponding phone number. Note: only up to 50 phone numbers can
     be put into the list.

`New'
     Generates a new telephonebook entry with standard settings and
     places it at the end of the telephonebook.

`Clone'
     Will duplicate the currently selected phonebook entry and place it
     at the end of the list.

`Remove'
     Removes the last selected telephonebook entry from the
     telephonebook and frees the memory allocated for this entry.

`Copy cfg.'
     A lot of time can be saved by copying selected parts of the global
     configuration to a local configuration which is part of a phonebook
     entry. Selecting this button will invoke a control panel which
     allows to select which parts of the global configuration should be
     copied. The control panel also remembers which parts were copied
     when it was invoked the last time, see Copy panel for more
     information.

`Use'
     Takes over the local configuration settings saved with the
     currently selected phonebook entry. Also installed are the
     associated password and user name entries.

`Tag'
     Tags the currently selected phonebook entry for inclusion in the
     dialing list. Pressing the `Space' key toggles the selection.

`Untag'
     Removes the currently selected phonebook entry from the dialing
     list. Pressing the `Space' key toggles the selection. Press the
     `Del' key to untag the currently selected phonebook entry.

`Tag all'
     Includes all phonebook entries in the dialing list.

`Toggle all'
     Adds all phonebook entries that are not in the dialing list to the
     dialing list and removes all entries from it that are already in
     it.

`Untag all'
     Removes all phonebook entries from the dialing list. Press
     `Shift+Del' to untag all entries.

`Load'
     Loads the contents of a telephonebook from a file.

`Save'
     Saves the contents of a telephonebook to a file.

`Print'
     This button will cause another control panel window to be opened,
     see Printing panel for more information.

`Sort'
     If any phonebook entries have been selected to be dialled, the
     phonebook entries will be sorted in the order of dialing. The
     remaining phonebook entries will be sorted in ascending
     alphabetical order.

`Password'
     Press this button if you wish to save a special access password
     with the currently active telephonebook file. You will then be
     asked to enter the password. What you type will not appear on the
     screen.

     To clear an existant password and to save the phonebook file
     without encryption, just press return when asked to enter the new
     password.

     The next time you save the phonebook data, the password will be
     encrypted and saved with it, the phonebook data itself will be
     encrypted using the password.

     *Whenever an encrypted phonebook file is loaded, it will take
     longer to load than an ordinary phonebook file, the same applies to
     saving phonebook data.*

`Dial'
     Will pass the list of currently marked phonebook entries to the
     dialing routine.

     *Note: phonebook entries which lack a phone number will not be
     entered into the dialing list.*

   Another list is located at the right hand side of the window. Each
entry refers to a control panel to be invoked on the currently selected
phonebook entry.

`Settings'
    `Serial'
    `Modem'
    `Screen'
    `Terminal'
    `Emulation'
    `Clipboard'
    `Capture'
    `Commands'
    `Misc'
    `Paths'
    `Transfer'
    `Translations'
    `Function keys'
    `Cursor keys'
    `Fast! macros'
          These entries refer directly to the settings main menu
          entries of the same name.

          With `Translations', `Function keys', `Cursor keys' and
          `Fast! macros' the data will be loaded from the corresponding
          files allowing you to edit it. `term' will remember the names
          of the settings files data is read from or is written to. You
          can change the name directly by holding down a shift key when
          clicking on `Translations', `Function keys', `Cursor keys' or
          `Fast! macros'.

    `User/Password'
          This entry will open a control panel in which the password
          and user name to be used for the current phonebook entry can
          be entered. Both password and name are made available from
          within the `term' ARexx interface to allow auto login script
          files to set up a connection.

    `Rates'
          `term' will count the minutes you are online and connected to
          a BBS as soon as a connection is made through the dialing
          routine. This entry opens a control panel which allows
          setting the necessary data (see Rate panel).

   If you are still online, the `Dial' button will be disabled. In
order to make another call hang up the line first.

   To put a phonebook entry into the dialing list, shift-click (i.e.
hold down either shift key, then click once on the list entry) its
name. The number appearing to the left of its name indicates the
precedence of entries in the dialing list. To remove an entry from the
list, shift-click it again. Instead of shift-clicking on an entry, the
space bar may be pressed as well.

   Double-clicking on a name will immediately dial the selected entry.

   To dial the list of selected entries, press the `Dial' button,
control will be passed over to the dialing panel.

   As I have been asked several times:  For dialing a telephone number
the dialing prefix specified for this telephone number is used. If the
MNP-error correction for a certain mailbox has to be specifically
switched on via the dial text, this has to be done in the modem
settings for this mailbox and not in the global settings of `term'. The
`Modem init' and `Modem exit' command entries of the phonebook can also
be used for initialization.

Rate panel
==========

   `term' will count the minutes you are online and connected to a BBS
as soon as a connection is made through the dialing routine. As soon as
the connection is lost or you hang up, `term' will use the information
to be specified in this control panel to calculate the amount of money
to be paid for the call.

`Pay/unit'
     The amount of money to be paid for each single time unit when
     online.  This fee must be given in the smallest currency unit
     available (pence, cents, centimes, etc.).

`Sec./unit'
     This is where you enter how many seconds each time unit lasts.

   There are two different groups of the two entries listed above
available:  one for the first unit and one for all following units. So,
if you only pay for the call you make but not for the time you spend
making it, just enter the fee in the first group and set the second
group to zero.

`Days and dates'
     This list contains the default rate settings and exceptions for
     certain dates and days of the week. Each line displays the type of
     the entry and a comment (separated by the `>>' character). The
     following types are available:

    `Day(s)'
          Settings for certain days of the week

    `12. Jan (example)'
          Settings for a specific date

     If there is no special type available for an entry, it's probably
     the default settings you are dealing with. These settings are used
     whenever `term' cannot find an entry for the current day.

   For each entry in this list there is at least one associated starting
time available which defines when the associated rate settings are to be
used. You will find the time settings in the list titled `Time'. To add
a new time use the `Add' button. To edit an existing entry use the
`Edit' button. To remove an entry, press the `Remove' button.

`Add date'
     Will invoke a control panel to create a new rate entry to be used
     on a specific date. Use the sliders and button to select the day
     the settings will be valid for.

`Add day(s)'
     Will create a new rate entry referring to one or more days of the
     week.  Use the buttons of the control panel to select the days the
     current settings will be valid for.

`Import'
     Much work can be saved if the rate settings for the current
     phonebook entry are imported (or copied) from a different
     phonebook entry. To do so, select this button. The control panel
     to be opened will display the list of phonebook entries available
     and three buttons:

    `Replace rates'
          The rate settings of the current phonebook entry will be
          replaced by the settings of the selected entry.

    `Append rates'
          The rate settings of the selected entry will be appended to
          the current phonebook entry.

    `Cancel'
          Will abort the selection.

   Whenever a rate entry is selected, the corresponding parameters
(`Pay/unit' and `Sec./unit') can be edited. If the entry refers to a
certain date or a specific day of week three additional buttons are
made available:

`Edit'
     Just as the labels says, will allow you to modify an entry after
     it has been created.

`Clone'
     Will duplicate the current rate entry and append it to the list.

`Remove'
     Removes an entry from the list.

Copy panel
==========

   This control panel allows you to select which parts of the global
configuration to copy into the currently selected phonebook entry.

`To all entries'
     The selected parts will be copied to all phonebook entries. If any
     phonebook entries are selected when this action is to be performed,
     only the selected entries will be affected.

`Copy'
     This is where you select from which source the configuration
     information will be copied:

    `Global configuration'
          Parts of the currently active global configuration will be
          copied.

    `Defaults'
          When going online, instead of overriding the currently active
          global configuration with the supplied local phonebook
          configuration the corresponding global configuration will be
          left unchanged.

`Select all'
     Selects all parts.

`Clear all'
     Clears the current selection.

`Use'
     Copies the selected items.

`Cancel'
     The window is closed, no items are copied.

Dial panel
==========

   The following information about the dialing process is displayed:

`Calling'
     The name of the telephonebook entry belonging to the number being
     dialled. If it is just a telephone number the text `<< Unknown >>'
     is shown, indicatinging that the name of the BBS is unknown.

`Comment'
     This is where the comment corresponding to the current dialing list
     entry is displayed.

`Number'
     The telephone number being dialed or just dialed.

`Next'
     The name of the phonebook entry which will be processed next if no
     connection is established. If no further entry exists, "-" will be
     displayed.

`Timeout'
     A counter which is decreased every second and which reflects the
     time remaining to establish a connection or to cycle through the
     dial queue again.

`Attempt'
     This field shows the number of unsuccessful cycles made through the
     dialing queue to establish a connection.

`Message'
     A message to the user. This can be:

    `Dialing...'
          A dial is in process.

    `Line is busy.'
          The dialed number is engaged.

    `Incoming call!'
          The modem has been called from another modem.

    `Incoming voice call!'
          The modem is receiving a call which was not originated by
          another modem.

    `No dialtone detected!'
          The modem was unable to detect any dialing tone on the line,
          it may possibly be not connected.

    `Connection established.'
          Just as the name says...

    `Maximum number of dial retries reached!'
          Just as the name says...

    `Dial attempt timeout.'
          The time available to establish a connection has been reached
          or exceeded.

    `Redial Delay...'
          Pause until the next cycle through the dialing queue.

   Additionally, the following controls are available:

`Skip'
     With this function the current dialing attempt is cancelled and
     the next number is processed. If no succeeding telephone number
     exists `term' waits for the next cycle through the dial queue or
     until `Skip call' is pressed again.

     There also is a hotkey combination available to accomplish the same
     task.

`Remove'
     This button works in part similar to the `Skip call' button.
     Additionally, it removes the current phonebook entry from the
     dialing list.

`Go to online'
     If the line is very noisy, the connection to a mailbox may have
     been made, but the `CONNECT' text may be got lost. Pressing this
     button will cause `term' to assume that the modem is in fact
     online now, start the rates accounting and return you to the main
     window.

`Stop dialing'
     Operation of this button exits the dial queue (leaving the the dial
     queue intact) and ends the dialing process.

`Start script recording on connection'
     As soon as the connection is establish `term' will start recording
     incoming text and your responses to it, thus making it possible to
     create auto-login scripts and such. For more information on this
     topic see Script recording.

   If a connection is successfully made the corresponding entry in the
dial queue will be removed.

   Selecting the close gadget will close the window and cause the phone
book panel to be reopened.

Printing panel
==============

   This control panel is part of the phonebook. It is opened whenever
the `Print' button is selected and allows for setting the output
options.

`Output file or device'
     This is where you enter the name of the file or device (such as
     `PRT:') the phonebook printout is to be sent to.

`Plain text'
     If enabled only the plain and bare information text will be
     printed, else text attribute control sequences will be sent as
     well.

`Include...'
     Each switch determines whether the corresponding phonebook entry
     information will be included in the printout.

`Use'
     Will start printing the phonebook contents.

`Cancel'
     Returns to the phonebook.

Trap panel
==========

   By default `term' scans the input data stream for a set of special
character sequences, such as `NO CARRIER', `RING' and `VOICE',
depending on how your modem settings (see Modem panel) are set up. The
trap panel permits adding custom character sequences which if found
cause `term' to execute the corresponding command sequences (see
Command sequences).  This makes it possible to write auto-login
procedures by just adding traps for the user name and password prompts.
For example, suppose your BBS prompts you to enter your user name with
the text `User name:' and to enter your password with the text
`Password:'. You would create two trap entries, one with `User name:'
as the sequence and `\\u\\r' as the command and one with `Password:' as
the sequence and `\\p\\r' as the command. Provided the phonebook entry
is set up correctly (see Phonebook, User/Password) connecting to the
system will log you in `automatically'.

   The trap settings editor consists of the following controls:

`Trap list'
     This list contains all the trap sequences `term' knows.

`Sequence'
     This text entry field contains the currently selected sequence.

`Command'
     This text entry field contains the command sequence (see Command
     sequences) to be executed when the corresponding trap sequence is
     found.

`|<'
     Move the currently selected entry to the beginning of the list.

`<'
     Move the currently selected entry up in the list.

`>'
     Move the currently selected entry down in the list.

`>|'
     Move the currently selected entry to the end of the list.

`New'
     A new trap list entry is added, prompting you to edit it.

`Remove'
     Removes the currently selected list entry

`Clear'
     Removes all entries from the list, clearing it.

`Use'
     Closes the window, using the current trap settings.

`Load'
     Loads the trap settings from a file.

`Save'
     Stores the trap settings in a file. *Note: `term' reads the
     default settings from the file *trap.prefs*, so make sure your
     trap settings are named accordingly if you wish to use them upon
     startup*.

File upload panel
=================

   `term' permits building a list of files to upload before the upload
is started. This list can be built in many ways, such as by dropping
the icons of the files to send on the icon labeled `term Upload queue',
by dropping the icons on the upload panel window, by entering the names
of the files in the upload panel window or by using the file requester.

   There are two ways to open the file upload panel. You can
double-click on the `term Upload queue' icon or use the main menu entry
`Upload queue'. It includes the following controls:

`Files to upload'
     This is the list of files to be sent. The text entry field below
     serves to add new file names or to edit the currently selected
     file name.

`Add files'
     Clicking on this button brings up a file requester to add new
     files to the list. You can select files from one directory at a
     time. The file requester will pop up over and over again asking
     you to add more files until you press the `Done' button.

`Add'
     Click on this button to add another file name to the list, you
     will be prompted to type in its name.

`Remove'
     Press this button to remove the currently selected entry from the
     list.

`Clear'
     In order to remove all entries from the list, clearing it, press
     this button.

`Binary upload'
     Use this button to upload the listed files in binary mode.

`Text upload'
     Press this button to upload the listed files in text mode.

`Hide'
     Click on this button to hide the file upload panel. The list
     contents will be stored.

Area code panel
===============

   In the phonebook (see Phonebook) phone rate accounting information
can be assigned to individual entries. The area code panel permits to
assign phone rate accounting information to the phone numbers
themselves, so even the `Dial phone number' menu function will take
advantage of it.  The area codes in each phone number determine the
rates accounting information to associate with it. In the area code
list you assign a name to each entry and a pattern to match a single or
multiple area codes; next you configure the rates parameters to use for
this entry.

   The area code rates accounting settings are not meant to replace the
individual rates settings in the phonebook, but they have priority over
them.

   The area code panel sports the following controls:

`Groups'
     This is the list of area code groups, the single entries are
     edited below.

`Name'
     A name or title for an area group entry.

`Pattern'
     The area code patterns are configured here. If you wish to have an
     entry correspond to area codes starting with `009' you would enter
     `009#?' here. The pattern syntax follows the AmigaDOS wildcard
     pattern syntax, so for example multiple area codes can be easily
     combined, e.g. `009' and `007' could be combined as `(009|007)#?'.
     See your `Using the system software' manual for more information.

     `term' scans the area code list top-down, i.e. for two consecutive
     entries `009#?' and `0097#?' the number `00971324' would match the
     first entry, but not the second.

`|<'
     Moves the currently selected entry to the beginning of the list.

`<'
     Moves the currently selected entry up in the list.

`>'
     Moves the currently selected entry down in the list.

`>|'
     Moves the currently selected entry to the end of the list.

`New'
     Creates a new area code entry and prompts you to edit it.

`Remove'
     Removes the currently selected area code entry from the list.

`Clear'
     Removes all area code entries from the list, clearing it.

`Edit'
     Brings up the rates editing window for the currently selected
     entry. See Rate panel for more information.

`Use'
     Closes the window, keeps the current settings.

`Load'
     Loads the area code & rates accounting information from a file.

`Save'
     Saves the area code & rates accounting information to a file.
     Upon startup `term' will read the default area code & rates
     accounting information from a file named `rates.prefs', so make
     sure that your settings file is named correctly for `term' to find
     it.

Configuration hints
*******************

   Admittely, `term' has more configuration options and settings than
you can shake a stick at. I have received a number of request to
explain where to start after installing the program:

  1. Start with the serial settings (see Serial panel). `term' will
     usually copy your current system preferences settings. If you
     happen to know that they are correct and worked fine for you in
     the past you probably don't need to make any changes.  But if you
     never were quite happy with the setup this is your chance to make
     it fit.

     As the lucky owner of a high speed modem to support all those
     nifty compressing transfer protocols nobody knows how to pronounce
     correctly (v.32/v.32bis/MNP/etc.) you will probably want to run it
     at baud rates around 9,600-19,200 bps. If you choose to do so make
     sure that the `Handshaking' switch is set to `RTS/CTS' or data is
     easily lost during transmissions. Note: some modems will lock up
     if the `RTS/CTS' handshaking protocol is enabled although they
     should support it. In most cases the modem behaviour can be
     changed, I recommend to consult the manual (good luck!), to turn
     the `RTS/CTS' handshaking off, to find the modem command to change
     the handshaking behaviour, to save the modem setup back to its
     nonvolatile RAM, to turn `RTS/CTS' handshaking back on and to
     restart.

     Older modem hardware usually supports only a fixed number of baud
     rates, mostly up to 2,400 bps. Do not enable `RTS/CTS'
     handshaking, leave it turned off. In fact if you don't turn it off
     `term' will have trouble sending and receiving data.

     Make sure that the baud rate fits and your modem supports it.
     Modern modem hardware usually can adjust to the baud rate you
     choose, older modems will send & receive illegible gibberish if
     addressed at the wrong baud rate. Not unheard of are modems which
     can communicate with the terminal program only at fixed baud
     rates: while they are happy with 9,600 bps they might find 14,400
     bps not at all worth responding to. I recommend that you try
     several baud rate settings until one is found to fit.

     If you don't want to use the built-in Amiga serial port hardware
     you will want to change the device name and unit number settings.
     Your I/O expansion hardware manual will tell you which name to
     choose and which device unit numbers are valid.

     The serial panel (see Serial panel) sports a number of additional
     options. *Do not change them right now!* In particular stay away
     from that sexy `High-speed mode' button and don't let the `Buffer
     size' slider tempt you. Return from the serial settings to the
     main menu by clicking on the `Use' button and save your current
     setup back to disk using the `Save settings' menu item.

  2. Proceed to the modem settings (see Modem panel) and take a look at
     text gadget labeled `Dial prefix'. A modem usually dials phone
     numbers either using a technique called `tone' or `pulse' dialing.
     Technically, tone dialing requires your local phone net operator
     (some kind of computer) to listen to a sequence of sounds which
     represent the single digits of the phone number dialled. Pulse
     dialing involves getting a number of electric pulses, each of
     which represents a digit of the phone number, transmitted across
     the line. Tone dialing is usually much faster than pulse dialing,
     but it isn't supported all over the world. If the receiver of your
     phone reports a number of beeping sounds when you dial a number
     you can use tone dialing.  If you hear rattling sounds it's
     probably pulse dialing for you. Let's get back to the `Dial
     prefix' entry: you will probably see something like `~~ATDP' here.
     Arrogant as I am, this is my personal default setup. The letter
     `P' indicates that pulse dialing will be used. If you can, change
     this to `T' for tone dialing.

     Leave the rest of the modem setup as it is, do not change the
     `Connect auto baud' switch.

  3. Next, take a look at the screen settings (see Screen panel). This
     is where you choose the terminal screen/window look and colours.
     By default `term' is configured to open a plain four colour screen
     using the Amiga default font. This should be sufficient unless you
     plan to spend most of your modeming time in PC-driven BBSes which
     keep throwing lots of colours at you.

     Choose how many colours the terminal should use, the switch labeled
     `Colour' will let you choose between `4 Colours (Amiga)', `8
     Colours (ANSI)', `16 Colours (EGA)' and `2 Colours (Monochrome)'.
     Each of these settings has a particular default palette attached.
     The `Amiga' mode will use your current system default colours.
     `ANSI' represents the choice of colours the ANSI committee
     responsible for standardizing a certain terminal command protocol
     to be the best given the constraints they had. `EGA' reflects
     whatever the engineers who designed the first Enhanced Graphics
     Adaptor card for the PC considered to be an enhanced colour
     palette. `Monochrome' is my idea how an extremely simplistic,
     while still readable colour choice could look like. Choose what
     you find appropriate, but keep in mind that the more colours to
     use the slower screen updates, scrolling and text output will get.
     Also, a 16 colour high resolution screen will put your system
     under additional stress if you are running an older Amiga model
     which is not equipped with the AGA chip set. Careful please, any
     changes you make will affect the performance of the program!

     You might want to change the screen mode or the user interface
     font. When you are satisfied with the setup, return to the main
     menu.

  4. Now it's time to edit the terminal settings (see Terminal panel).
     This is where you control the basic behaviour of the terminal
     emulation. If you wish to use an IBM PC style font for the
     terminal display you can do so by changing the `Font' switch to
     `IBM PC style'. Alternatively, you might find it worth changing
     the `Text font' instead which is the font to be used for terminal
     text output. Note that if the `Font' switch is set to anything
     else but `Standard' your `Text font' settings will be ignored.
     Well, actually they will not be entirely ignored, but the IBM PC
     style font will be opened in the point size you selected.

     Don't touch any other controls, return to the main menu when you
     are finished.

  5. If you are likely to visit a lot of PC BBSes, edit the emulation
     settings now (see Emulation panel). You might want to turn on the
     switch labeled ``CLS' resets cursor position', otherwise the
     terminal screen might not get cleared properly when the BBS sends
     the control codes it considers appropriate for this purpose.

     Leave the rest of the setup as it is and return to the main menu.

  6. The next step involves changing the path settings (see Path
     panel). When receiving files on your machine you might want to
     have them stored in a special drawer. You can do this by editing
     the default download paths. Most important is the `Default binary
     download path', I suggest to create a drawer called `Downloads'
     within the drawer `term' resides in. Once this is done simply type
     the name `PROGDIR:Downloads' and return to the main menu. The next
     binary file downloaded will go into the `Downloads' drawer.

   If you followed these steps `term' should be configured for the first
session. Save the current settings to disk now so you can always return
to this working configuration later in case the changes you made to the
current setup did not have the desired effect. You can try to fine-tune
your `term' setup now and change some of the options not covered in this
brief introduction, but please remember to keep your original
configuration file in a safe place, you will be glad you did.

Built-in terminal emulation
***************************

   The `term' built-in terminal emulation implements the VT-220 command
set with a few exceptions. There are no country specific character sets,
no down-line-loadable character sets, no user defined keys, no keyboard
language support and only ten function keys, not twenty (many of these
features are supported through the Amiga operating system). Most VT-102
and VT-52 commands should be supported as well, but since my
documentation on these command sets is rather incomplete I cannot be
entirely sure all the features are covered.

   The numeric keypad and the four cursor keys can be switched into
applications mode if requested by the remote. The four programmable
function keys (also known as PF keys) are mapped to the top row of the
numeric keypad. When in applications mode these keys will generate the
codes produced by the PF keys on a VT-102 terminal. If in standard
mode, you will need to hold down the `Control' key in order to make
theses keys generate the correct PF key codes.

   The `Tab' and `Space' keys receive special treatment if a qualifier
key is held down when they are pressed. `Shift + Tab' will generate two
`Escape + Tab' characters. `Control + Space' generates the ASCII `NUL'
byte.

Text buffer
***********

   The text buffer implements a service which continually stores text
displayed on `term's main screen, so the user can refer to it lateron.

General characteristics
=======================

   The size of the text buffer is managed dynamically so that for every
new line which is read new memory must be allocated. So the size of the
text buffer is limited only by the amount of the available memory. It
is recommended that the text buffer is emptied periodically to avoid
using the entire free memory.

   If there is insufficient memory to place a new line into the text
buffer, the first line will be deleted to make room for the new line.

Operation
=========

   The contents of the text buffer can be paged through using the keys
for moving of the cursor (`Shift + Cursor' keys moves page by page,
`Control + Cursor' key jumps to the beginning or end of the text
buffer). Additionally, the numeric keypad keys are overlaid with jump
and paging functions (corresponding to the inscriptions/graphics on the
front of the keys).

   There also is a pull-down menu available which is briefly described
below:

`Search'
     A search function is called which scans from the topmost line on
     the screen for the search text entered. If the search text is
     found it is displayed and highlighted.

     `term' remembers search strings entered. You can use the `Cursor
     up' and `Cursor down' keys to recall previous input.

     In addition to the search text there are a number of options which
     may be specified when searching:

    `Search forward'
          If this switch is enabled `term' search from the topmost line
          on the screen downward to the end of the buffer, otherwise it
          searches upward to the beginning of the buffer.

    `Ignore case'
          With this switch enabled the search does not distinguish
          between lower case and upper case characters, i.e. `TEXT' =
          `Text' = `text', etc.

    `Only whole words'
          If this switch is enabled, `term' will search for whole words
          only, not for parts of a word. For example, searching for
          `term' with the `Only whole words' option enabled would stop
          at the word `term', but ignore the word `terminal'.

`Repeat search'
     Continues the search process started with `Search'. The previously
     entered search text is carried over.

`Go to main screen'
     Switches to the main screen of `term'.

`Clear buffer'
     Clears the contents of the text buffer.

`Close buffer'
     Closes the text buffer screen but leaves the contents unchanged.

Clipboard
*********

   Cut & paste functions are available on the main screen, the buffer
screen and the review buffer. Here is how to use them:

`Buffer screen'
     Use the mouse to point to the first character you wish to send to
     the clipboard, hold down the select button, drag the mouse to the
     last character you wish to copy and release the button. The text
     marked will be transferred to the clipboard.

     Holding down the `Control' key while clicking on a character will
     feed the single character into the input stream, it will not be
     buffered in the clipboard.

`Main screen'
     Use the mouse to point to the first character you wish to send to
     the clipboard, hold down the select button, drag the mouse to the
     last character you wish to select and release the button. Select
     the `Copy' menu item (see Edit) to transfer the text to the
     clipboard.  Instead of dragging the mouse you may also
     double-click on a single word to select it.

     Holding down the `Control' key while clicking on a character will
     feed the single character into the input stream, it will not be
     buffered in the clipboard.

`Review buffer'
     Use the mouse to point to the first character you wish to send to
     the clipboard, hold down the select button, drag the mouse to the
     last character you wish to select and release the button. Press
     `Amiga + C' to copy the selected text to the clipboard.

   To paste the clipboard contents, i.e. feed them into the terminal
input stream, either select the `Paste' menu item (see Edit) or press
`Amiga + V'. In order to send the clipboard contents along with a
`Paste prefix' and `Paste suffix' hold down any `Shift' key when
selecting the `Paste' menu entry or when selecting text with the mouse
(this works both with the main screen and the text buffer screen).

   Hold down one of the `Alt' keys and press the left mouse button to
make `term' emit a number of cursor move sequences which will position
the on-screen cursor at the spot where you clicked the mouse.

   In standard text gadgets a solution had to be found to preserve the
line editing functions while still supporting menu shortcuts. To undo
any changes made press `Amiga + Q', to clear the text gadgets press
`Amiga + X'. Menus associated with the shortcuts `Amiga + Q/X' are
called by holding down any `Shift' key along with the `Amiga' keys
(i.e. `Shift + Amiga + Q' will select the `Quit' menu item if
available).

Command sequences
*****************

   Each text sent directly to the modem is a command sequence. This
includes telephone numbers, modem initialisation strings, function key
assignments, etc. In addition to the normal text strings various other
commands are supported which will be described in the following section.

Backslash
=========

`\\'
     Generates a single backslash.

`\0'
     Resets the text pacing mode (see Clipboard panel) to the settings
     defaults. Any changes of the text pacing mode affect only the line
     to be sent. The next following line will be sent using the default
     text pacing mode.

`\1'
     Sets the text pacing mode to `Direct'.

`\2'
     Sets the text pacing mode to `Wait for echo'.

`\3'
     Sets the text pacing mode to `Wait for any echo'.

`\4'
     Sets the text pacing mode to `Wait for line prompt'.

`\5'
     Sets the text pacing mode to `Character/line delay'.

`\6'
     Sets the text pacing mode to `Keyboard delay'.

`\a'
     Executes an ARexx command (all text to follow this character).

`\b'
     Generates a backspace (deletes the character to the left of the
     cursor).

`\c'
     Calls a main menu entry, the menu entry to be called is determined
     by the argument to follow; this is either a six digit number
     (example: `\c 010203' would call subitem 1, item 2, menu 3) or the
     name of the menu entry enclosed in single quotes to call (example:
     `\c 'about'' would call the `About...' menu entry, the search is
     case-insensitive and only compares the characters given).

`\d'
     Executes an AmigaDOS command (all text to follow this character).

`\e'
     Generates the escape character (ASCII code 27).

`\f'
     Generates a form feed (skip to beginning of the next page or clear
     the screen).

`\g'
     Places the text to follow this character in the clipboard.

`\h'
     Appends the text to follow this character to the current clipboard
     contents.

`\i'
     Feeds the contents of the clipboard into the input stream.

`\n'
     Generates a line feed.

`\p'
     Feeds the password of the currently active telephonebook entry
     into the input stream. *The password is automatically cleared for
     security reasons when the connection is lost.*

`\r'
     Generates a carriage return.

`\t'
     Generates a tab jump.

`\u'
     Similar to the `\p' command, the `\u' command will feed the
     current user name into the input stream.

`\x'
     Generates a break signal (as with the `Send break' menu entry).

`\^'
     Generates a caret character.

`\~'
     Generates a tilde character.

`\*'
     The code to follow the asterisk determines the character to
     produce.  This can be any three digit number or a symbolic name
     from the following list (1):

     `NUL', `SOH', `STX', `ETX', `EOT', `ENQ', `ACK', `BEL', `BS',
     `HT', `LF', `VT', `FF', `CR', `SO', `SI', `DLE', `DC1', `DC2',
     `DC3', `DC4', `NAK', `SYN', `ETB', `CAN', `EM', `SUB', `ESC',
     `FS', `GS', `RS', `US', `SP', `DEL', `SS2', `SS3', `DCS', `CSI',
     `ST', `OSC', `PM', `APC', `NBS' and `SHY'

   If none of the mentioned combinations is recognized the character
which follows the `\' will be fed into the input stream without any
changes.

   ---------- Footnotes ----------

   (1)  `EOU' may be implemented in a future release

Caret
=====

   This character is used to change the following character to a
`control character'. So the sequence `^J' will become a Line feed and
`^I' becomes a tab jump. The character which follows the `^' has to be
located between `@' and `[', otherwise it is fed into the input stream
without changes.

Tilde
=====

   This character causes the program to pause for exactly half a second
before it continues to process the following commands.

Fast! macros
************

   In implementation and design the fast! macros are closely related to
the function key macros (see Function key panel). If invoked by
selecting the corresponding menu entry, a window will open on the right
hand side of the screen sporting a scrollable list of macros (the
contents of this list can be edited using the fast! macro panel).  When
a list entry is selected, the associated command sequence (see Command
sequences) will be executed.

   By using the fast! macros it is theoretically possible to control a
BBS just by mouse, provided that you have the approriate macros in your
fast! macro list.

   The fast! macro panel can be resized and acts just like the main
`term' window:  menu items can be selected and characters entered are
sent to the serial driver.

Packet window
*************

   In this window a line can be edited before it is sent. All the usual
editing functions known from standard input fields are available
(`Shift + cursor left/right' jumps to the start/end of the line).

   Additionally, some extended functions exist which are performed by
pressing a cursor key together with the `Shift' or `Control' key:

`Control + Cursor left'
     Jumps to the next word.

`Control + Cursor right'
     Jumps to the previous word.

`Cursor up'
     Shows the last entered command in the input line.

`Shift + Cursor up'
     Shows the very first command entered so far.

`Cursor down'
     Shows the next entered command (if you moved back for some
     commands before).

`Shift + Cursor down'
     Shows the very last command entered so far.

   This text gadget has a buffer where all previously entered commands
are stored (`Command history'). You can page through this buffer, load
and save it and individual lines can be recalled. As with the text
buffer this buffer is managed dynamically. The same memory restrictions
that apply to the text buffer are valid for this buffer.

   The input line also has a menu which offers the following functions:

`Load history'
     Loads the contents of the input line buffer from a file. Each
     stored line in this file can be recalled and sent.

`Save history as...'
     Saves the contents of the input line buffer to a file.

`Clear history'
     Simply releases all previously stored commands and the memory used
     by them.

`Other window'
     Switches to the main screen of `term'.

`Show output'
     If not enabled, this causes the input line not to be echoed in the
     terminal window.

`Quit'
     Closes the window (corresponds to clicking the close gadget of the
     window).

   *Every character entered into this window is shown immediately so
that those things where it is better that they should not appear on the
screen (like passwords for a mailbox) should be entered in another way.*

   The contents of every input line are interpreted as a command
sequence and therefore can also contain control characters.

   If a line taken from the input buffer is sent without change it is
*not* stored in the buffer again (`true history' such as known from
`ConMan').

   The contents of the input buffer are cleared automatically after the
window is closed. *Under no circumstances are the contents maintained
until the next call!*

   Provided that the packet window is large enough, a list to contain
the command line history will be displayed.

Chat line
*********

   The chat line is roughly functionally equivalent to the packet window
(see Packet window). However, there is no special pull-down menu and no
option to save or load the command history. Unlike the packet window
the command history is kept between invocations.

   The chat line is, as the name says, a text entry field which allows
one single line of text to be entered. Except for the optical appearance
(the text entry field appears as a single line above the status line,
it's also a tad smaller than the packet window) it is virtually
identical in handling with the packet window. The only exception is the
special key combination to use when clearing the entire past command
history.  To clear the history, hold down either `Amiga' key and then
press either the `Del' or the `Backspace' key.

Script recording
****************

   `term' offers a feature called `Script recording' which lets you
record incoming data sent by a BBS or a remote host and your response
to it, i.e. the text you typed, such as login name and password. The
recorded data can then be saved to an ARexx script file which can be
used as an auto-login script.  In order to record a script you can
either use the dialing panel button labeled `Start recording on
connection' or the menu item `Record'.

   Once `term' is recording terminal output and your input the status
display will show `Recording' or `Rec.line', depending on the text
entry mode. By default `term' will only record single keystrokes, which
makes it difficult to enter whole words. If you want `term' to remember
the entire line of text you are about to enter either use the `Record
line' menu item or press the `shift+return' key combination: the status
will change to `Rec.line'. To return to keystroke recording just press
the `return' key or select the `Record line' menu item/press
`shift+return' again.

   `term' only remembers the last ten characters sent and a maximum of
256 characters you can enter per line. If you enter more than this
number of characters older keystrokes will be discarded.

   When you are finished recording the script select the `Record line'
menu item. A file requester will ask you for the file name to save the
script under. If the file is successfully saved you may be asked whether
you want the script file to be used as a login script for the currently
active phonebook entry.

   The script file generated will consist of ARexx commands `term'
understands, mostly `TIMEOUT', `WAIT' and `SEND'. The text to be waited
for and to be sent is given in standard `term' command sequence
notation. For more information consult the chapter entitled Command
sequences.  The `term' ARexx interface documentation provides the
necessary background to explain how the script commands work, it should
also give you hints how to customize the recorded scripts.

   *Caution:* scripts recorded by `term' usually need additional
editing, don't expect a script to work right away.  You may want to
change the timeout values, remove extra characters and input.

Environment variables
*********************

   Information which is to be available the next time the program is
run is placed as AmigaDOS variables in the directories `ENV:' and
`ENVARC:' by `term'.

   The variables used by `term' can be used and manipulated by other
programs transparently. In detail these variables are:

`TERMCONFIGPATH'
     The name of the directory in which all information used by `term'
     is placed (standard configuration, phonebook, etc.). The default
     settings path name is `TERM:config'.

`TERMWINDOW'
     The window definition which can also be entered in the program via
     the menu item Settings.

`xpr...'
     The standard settings used for the corresponding transfer protocol
     (`xprzmodem', `xprkermit', etc.).

`xem...'
     The standard settings used for the corresponding external terminal
     emulation library (`xemvt340', `xemascii', etc.).

PGP key
*******

   Below you will find my signed public key. Save it to a disk file and
enter `PGP <file name>' to decode it. This will produce a file called
`public_key'. To add my key to your PGP keyring now enter `PGP -ka
public_key' and follow the instructions on the screen. To verify my
signature, now enter `PGP <file name>' again. It's probably pretty
paranoid to rely upon PGP signatures and keys, but then again you might
want to have a somewhat unambiguous proof that the distribution
archives you have downloaded are intact.  Security can still be
compromised, it you don't trust the key below you can still contact me
to ask for an official key.

     -----BEGIN PGP MESSAGE-----
     Version: 2.3a.2

     owHrZAhlYmXQEzvfldcZOadb3WIiI+OGm4y/2ZdpeDIxcR1o4V/elrPHvuTZjnbV
     f54d6g++Trl1qJz/35uNVg33GSfvfzH7lnVo/ZWHVwsuOTq+TDSZsnXTx5eGFyzW
     MkolcRWUJuVkJsdnp1YyAIEuCDi5unv6KQS4BygEhDr5eDoreLtGKjj5+Dt7g6W5
     wlKLijPz86wUjPSME/WMuLhyA538HDMrnSzMIh0dHV2dHX0yywxCSkNSvQKqnHKy
     vHIynUvK8lyKU/XLsyJNvFKrynJLfLKN07RDk6NM0wrDuNK9QyO8MgIjw4NMzS2M
     03MKCx1DHNOLfPxNI72T8nOi8jyL8/y9XB2dgtwNfFwtiyPDI9MjgXSyUVipV6WT
     M1dkhJdBontYsadLRVmSh19OUrZTVZJxWGWkUVhlarBpfmS4SWmUe6g2l61prkEq
     F9gfrn4ueDwJAA==
     =kKr7
     -----END PGP MESSAGE-----

Revision history
****************

Changes introduced with v4.2:
*****************************

   * Did not set up serial parameter correctly (nasty, those typos!).

   * HydraCom could cause `term' to hang upon startup.

   * Increased the width of all the integer gadgets in the rates
     settings panel.

   * Incrementer arrows did not work properly in all settings panels,
     this was due to a bug in the SAS/C optimizer which caused
     gtlayout.library to run into trouble.

   * When called from the phonebook, the "Standard" button as shown by
     the translation table settings panel will cause the translation
     settings to be reset to standard values.

   * Text stored in the buffer did not get bit 7 stripped if this
     feature was enabled in the serial settings.

   * New look slider gadgets (requires gtlayout.library v5).

   * Numerous bug fixes in the user interface support library.

   * Rewrote the text buffer capture routines, there should no longer
     be extra, unwanted data in the buffer.

   * Fixed the overly wide incrementer arrow bug which caused so much
     trouble in previous releases.

   * Reloading the fast macros when making a new connection did not
     update the fast macro window.

   * In the area codes editor, creating a new entry and moving it
     around no longer leads to unexpected results.

   * There was a typo in the source code which prevented the EOL
     translation settings from getting changed via ARexx.

   * For a phonebook entry dialed, the startup and login macros are now
     executed in sequence rather than in parallel.

   * New capture settings options "Convert characters": if enabled
     along with the capture filter, text stored in the text buffer and
     the capture file will be converted into proper ISO characters.
     This effectively discards unprintable IBM font style characters.
     Note that this option will do nothing if you are using the standard
     text font rather than the IBM text font. Also keep in mind that
     this special text filter will always be enabled for printer
     captures in order to avoid nasty side-effects. The text and review
     buffers will no longer use the IBM PC style font if this option is
     in effect.

   * In the emulation settings you will find a new switch labeled "Lock
     wrapping" which will let you lock the current line wrapping mode
     so that application software and terminal resets will no longer
     modify it.

   * Added another two `lock' options. Now you can choose to lock the
     current text colour and the text rendering style. Take care, the
     `Reset styles' and `Reset terminal' options will no longer change
     colour and style once they are locked.

   * Made sure that interleaved screens work properly. They do now.  If
     you still see text scrolled or erased plane by plane you're either
     hallucinating or you have the PICASSO monitor driver installed
     which has the systemwide effect of making the operating system
     ignore requests to use interleaved bitmaps.

     Closer examination has revealed that the interleaved bitmap stuff
     did not work properly when using Kickstart v2.04. In fact,
     Kickstart v3.0 is the first operating system release which fully
     supports interleaved bitmaps for all graphics rendering calls.
     Previous releases did not take advantage of them, even if set up
     properly. Sorry folks, you won't be able to use this feature under
     Kickstart v2.04 any more: I removed the necessary support routines.

   * Added pen and text attribute translation. In the emulation
     settings you will find an option to select nonstandard pens.  In
     this case, these pens refer to the terminal emulation rendering
     pens and text attributes.

   * Tweaked the terminal emulation parser to swallow the Amiga
     specific commands to turn the cursor on or off (aSCR).

   * The device/library selection now also includes ROM-resident
     modules. At least one multiserial board includes a driver in its
     ROM rather than on disk. In older releases, this particular driver
     did not show up in the list, causing users to believe their boards
     to be damaged.

   * Changed the audio channel allocation priority. In previous program
     releases the channels could be stolen, causing `term' to hang or
     crash. Now it's DeliTracker to break down, not `term' ;-)

   * Cloning a phonebook entry did not duplicate the corresponding
     transfer settings. This has been fixed.

   * The serial settings now sport an additional OwnDevUnit control
     switch. You can now choose to ignore requests to release the
     serial device driver or to have the device released, causing
     `term' to check in intervals of 4 seconds if the device has become
     available again. The default behaviour (the device driver is
     released) is still supported.

   * There is another sound options, called `Error sound'. `term' will
     play this sound if a certain number of transfer errors have
     occured. The number of errors to occur can also be set in the
     transfer settings editor.

   * You can now select when the file transfer routines should notify
     you. You can be notified both at the beginning and the end of the
     transfer, just at the beginning, just at the end or even never.

   * The program no longer reports phone rates after losing a
     connection if there is no sensible data to report.

   * The "WAIT" command did apparently pay attention to the case of
     characters passed in when scanning the wait list for matching
     entries. This has been fixed.

   * For some strange reasons, the VT-100 supplementary graphics
     character set never got loaded. This has been fixed.

   * Rewrote the status line display code (yet again). When running on
     a custom screen you probably won't see any difference, but: open
     `term' on a public screen and watch your system performance. No
     more deadlocks, no more sluggish mouse movements, no more CPU
     hogging. The display window is a bit larger, but this hopefully
     won't be a problem. After all, the window mode is usable now.  The
     old BOOPSI code is gone and will probably never return. The new
     code is in many ways quite a bit nicer than the old code. For
     example, it is synchronized with the window size changes. As soon
     as the terminal adapts itself to the new window size, so does the
     status line display.

   * The review buffer window text rendering colours would also get set
     to some value when opening the program on a custom screen. It now
     leaves the text colour untouched in this case.

   * The main window position is now saved along with the main settings.

   * Finally added the one-line chat text entry field which surely is
     no replacement for the packet window, but nevertheless I hope at
     least some folks will find it useful. No split-screen chat yet,
     sorry.

   * The `dial number' requester now remembers phone numbers between
     calls.

   * The quick dial menu now gets disabled if the modem is online.

   * The ASCII transfer menu items no longer get disabled if the
     internal transfer routines are selected and the XPR ascii transfer
     lib names are blank.

   * Updated the font selection code for text and review buffer
     displays. The review buffer now runs as a Process, so it can open
     disk resident fonts if it needs to.

   * Fixed a few bugs in the SETATTR ARexx command.

   * Auto-expanding control panels, such as the phonebook and the file
     transfer window no longer obscure the status line display.

   * The program now properly pays attention to the number of lines to
     use for the terminal display. Thanks go to Russ for his
     persistence ;-)

   * In monochrome mode text is no longer printed in inverse video mode.

   * The screen settings editor now allows you to change the colour
     mode even if `term' is running on a public screen.

Changes introduced with v4.1:
*****************************

   * Fixed an Enforcer hit in gtlayout.library caused by the text
     gadget handling code.

   * If possible child windows are now opened within the bounds of
     their parent windows.

   * Fixed an Enforcer hit caused by the ARexx interface building
     dialing lists.

   * Reordered the parameters of the "ADDITEM" ARexx interface command.

   * Rewrote the entire data capturing process. I somewhat opened a can
     of worms, making it necessary to rewrite the code that handles the
     translations for the "Receive CR as..." and "Receive LF as..."
     options as well. Careful please, although I am sure the code works
     correctly I may have knocked over some china cups.

   * Added some more safety catches to the upload queue handling.
     Using the auto-upload panel with the upload queue could leave you
     locked out, blocking `term'. Generally, not a very nice thing to
     do. Under the same conditions the code will now fall back to
     presenting the standard file requesters.

   * Fixed a bug in the capture panel which could turn up if the editor
     was invoked from the phonebook.

   * Corrected some few typos in the english user interface text.

   * Turning off script recording did not reset the program status to
     `ready'. This has been fixed.

   * Heaven knows why, but v4.0 did not permit changing the screen
     colours if running in monochrome mode.

   * The `Freeze buffer' menu now properly toggles the state of the
     capture buffer.

   * The terminal settings now take the maximum possible values into
     account when setting the selection ranges for the number of
     columns and lines.

   * When using a startup script or a startup command the program no
     longer displays its `about' window on program startup.

   * The ARexx command "GOONLINE" now sets up some more of status
     variables than it used to do in v4.0.

   * Upon startup the carrier signal is checked (provided your serial
     configuration says that the carrier should be checked) and if it
     is present the online timer is started.

   * Added a bunch more of serial baud rates. Don't overdo it, a
     standard Amiga won't go faster than 115K baud.

   * Replaced the serial rate slider with an integer gadget featuring
     incrementer arrows. Clicking on the arrows will cycle through all
     standard baud rates. Note: requires gtlayout.library 1.97 or
     higher.

   * When offline detecting a carrier signal will bring `term' into
     online state, provided the `Check carrier' flag is enabled in the
     serial settings.

   * ^Q now works again.

   * The end-of-line character translation scheme was changed into one
     single unified concept. Both carriage return and line feed
     characters can now be translated into <cr>, <lf>, <lf><cr>,
     <cr><lf> or can be ignored.

   * The phone rates management is moving from the individual phone
     book entries into a separate global settings editor.  The old
     rates management style will continue to work, but the new
     management scheme has priority over it.

     Here is how the new scheme works: you now assign the rates
     accounting data to area codes rather than to single phone book
     entries. Suppose you want a special set of rates settings to be
     used for all phone book entries and phone numbers which start with
     the area code "009". In this case you would add another group
     entry, assign a name to it and put "009#?" into the pattern field.
     The next time `term' makes a connection to a phone number starting
     with the digits "009" the corresponding rates settings will be
     used. `term' scans the list top-down, so the default settings
     should be put into the last list entry.  The patterns follow the
     AmigaDOS syntax.

   * Finally discovered why so many old phonebook files would cause
     trouble: the internal conversion routine was *never* called.

   * Horrors! The sound.datatype saves invalid sound files with the
     playback size set to zero, causing `term' to crash with a
     `division by zero' error. The replay routine now handles such odd
     files.

   * The sliders for redial delay and time to connect now finally sport
     a resolution of a single second rather than ten seconds.

   * Shortened gadget labels & texts and rearranged the gadget layout
     to make sure all windows will fit on a plain 640 x 400 sized screen
     with topaz/8. Sorry folks, 640 x 200 is right out of the question.
     These are the days of miracle and wonder and all modern Amiga
     hardware is capable of displaying screens this size in
     non-interlaced modes.  If things still don't seem to fit try a
     different font, preferably proportional-spaced, or a different
     screen resolution (change the overscan size if necessary).

   * Whilst reworking the documentation discovered that I forgot to add
     the `Alert' control to the terminal panel.

   * With Workbench v2.04 the screen mode requester automatically
     resets the screen size and overscan values to defaults.

   * The text buffer search requester now sports another option, "Whole
     words only".

   * The jump scroll option code had a control switch set in the `wrong
     direction'. Nothing serious, `term' would only scroll too many
     lines.

   * The jump scrolling routines did not take the size and position of
     the currently active scroll region into account. This could knock
     out the emulation since the cursor could cross the legal position
     limits.

   * Added some more control key codes as per the VT 220 Programmer
     Pocket Guide, such as ^2, ^3, ^4, ^5, ^[, ^/, ^].

   * Fixed another bug that would cause `term' to busy loop if it
     stumbled upon a non-printable character in IBM PC style font mode.

   * `term' now supports context-sensitive help with AmigaGuide v34.  I
     finally discovered a set of AmigaGuide commands that would not
     crash when told to change the currently displayed context.

   * Changing XEM options will save them back to disk.

   * Rewrote the hangup/carrier lost/online/offline handling procedure.
     The online/offline status tracking is protected by semaphores now,
     the code to modify the status was reduced to a great deal, it's
     only in termDial.c, termARexxCommands.c and in termMain.c. The
     hang up command and carrier lost actions now go through the same
     code, i.e. backup config & redial on logoff now work both for
     logoff & hangup.

   * The phone rates accounting by area codes did not work since the
     routines were commented out. I removed the comments, they should
     work now.

   * The buffer management no longer collapses if you try to clear the
     contents while there is still data coming in.

   * Reread the "VT 220 Programmer Pocket Guide" and added most of the
     remaining unsupported control sequences. Not supported are the
     programmable function keys and data transfers bracketed by
     DCS..ST. A number of control sequences are still no-ops, such as
     the national/multinational font support operations.

   * Double-clicking on a phonebook entry with no phone number attached
     no longer starts dialing.

   * Changed numeric keypad applications mode and PF key handling.  I
     hope it works with all keymappings now.

   * Cloning a rates settings entry did not properly duplicate all data
     associated with the original entry.

   * Creating a new phonebook entry will set the rates accounting data
     connected with it to zeroes.

   * Rewrote the prescrolling/jump scrolling support code which now
     should get the job more quickly than before.

   * Resetting the terminal emulation no longer clears the state of the
     `Wrap cursor moves' option.

   * Rewrote and simplified serial I/O processing, I hope it still
     works.

   * Dialing commands no longer make it into the text buffer.

   * The `Cancel' button in the phonebook panel was relabeled, now
     showing `Use' instead.

   * The program no longer puts the upload queue icon into the Workbench
     window by default, there is a new option to turn it off.

   * You can finally edit all the settings to be changed in the
     phonebook, this includes function keys, cursor keys, translation
     tables and fast macros. Hold down either shift key to bring up the
     old file requesters. Note that you will also get the old file
     requesters if something goes wrong reading and setting up the
     settings data.

   * Added an option to make a hardcopy of the screen contents, invoking
     the printer graphics dump function.

   * All the windows sporting pull-down menus now support menu help,
     i.e.  if you press the help key while a menu item is being
     selected `term' will bring up the online help page for the
     corresponding menu.

   * Duplicating a phonebook entry now properly duplicates the
     corresponding rates settings.

   * Added new keyboard shortcuts to the phonebook controls. Pressing
     `Del' untags the currently selected entry, `Shift+Del' untags all
     entries.

   * `term' now looks up the "Fonts" and "Libs" drawers in the current
     directory and adds them to the "Fonts:" and "Libs:" assignment
     list.  At least for me, this greatly simplifies the installation
     procedure.  Just copy the contents of all distribution archives
     into a single drawer and let `term' do the rest.

   * The fast! macro button list now properly responds to Alt+Amiga key
     clicks. I also thinned out the code a bit, causing the buttons to
     render a little faster.

   * Relabeled the button in the bottom left corner of the phonebook
     window again. It now reads "Close".

   * The buffer search requesters are now non-modal so you can have them
     open and continue to use the text buffer display.

   * I reworked some parts of the user interface, trying to clarify the
     functions of menus and buttons. I also removed some redundant
     button labels and changed all references to `directories' to
     `drawers'.

   * Shortened the button labels for the phonebook and the rate panel,
     so they will finally fit on a 640 x 400 screen using topaz/8.
     Some button labels now look fairly obscure, sorry about that.  I
     guess I'll rething the part about the "clarification" again...

   * More weird & wonderful changes to the serial device interface
     code. I hope it still works.

   * When hanging up the line using the corresponding menu command the
     online state is no longer reset to `offline' if in the serial
     settings the "Check carrier" feature is enabled. This leaves the
     test for the carrier to the usual routines which will detect if
     the carrier is really gone.

   * With multi-number phonebook entries the dialer now displays how
     many of these numbers have been dialed already.

   * There was something really wrong with the way clipboard text was
     pasted as the `end of line' character conversion would be applied
     twice.

   * The "Time to connect" data was never used for phone rates
     accounting, it only played a minor role in the "Connect limit"
     settings.

   * The pop-up `About' window no longer is GimmeZeroZero, which is
     both sexy and uses less memory.

   * Beep & action sounds are now loaded via datatypes if available.
     Under v39 this may not work well for large sound files due to a
     bug in sound.datatype. Plain IFF-8SVX format sound files will
     still be played using the built-in routines since they are more
     flexible than sound.datatype and can replay stereo sound.

   * Non-standard-sized system imagery (sizing gadgets, arrow gadgets,
     etc.) is now supported whereever it is used.

   * The phonebook window no longer sports a `Close' button, all that's
     left is the `Dial...' button.

   * Phonebook entries which lack a phone number can no longer be used
     for the dialing list.

Changes introduced with v4.0:
*****************************

   * The window status line is no longer `misplaced' under Kickstart
     v2.x.

   * Font, file and screen requesters are no longer quite so tiny.

   * Different font scales as by the VT-100 specs (half width, double
     width, top double size, bottom double size) work again.

   * All memory allocations now go through memory pools, reducing
     memory fragmentation greatly. Note: Kickstart 3.x owners *should*
     have SetPatch 40.16 installed as the memory pool code might have
     trouble freeing empty memory pools until the program exits.  This
     memory allocation scheme should also help to get `term' to work
     with certain virtual memory system extensions.

   * In the XPR transfer window the error/message list will no longer
     hold more than 100 entries in order to save memory. I have received
     reports of users who ran large file transfers overnight and when
     getting up in the next morning the transfer error/message list had
     accumulated so much memory it was no longer possible to move the
     mouse: Intuition was unable to allocate enough memory to create new
     input events. If 100 messages have accumulated and a new one is
     about to be added the first and oldest entry will be removed.

   * The status line display now properly reflects the name of the
     current file transfer protocol.

   * The quick dial menu checkmarks would get cleared only on some rare
     occasions, i.e. if the first phonebook entry had the `Quick dial
     menu' feature set. Now it gets the job done no matter which
     phonebook entry is the first one in the quick dial menu.

   * The main window menus used to have the command shortcut `W'
     assigned twice.

   * If running on the Workbench dropping icons on the `term' window
     would ask for the type of file transfer (text or binary), but it
     would get the selection wrong, i.e. if you chose text you got a
     binary upload and the other way round. This has been fixed.

   * When in zoomed state the XPR transfer window will display the name
     of the file currently being transferred and how much of it has
     already been transferred (if available). This display will be
     updated about once a second.

   * If icons are to be created for files downloaded it is no longer
     necessary to turn on file type identification to actually get the
     icons attached.

   * Freezing the text buffer contents now properly updates the text
     processing routine variables.

   * Calling the `Print clipboard' function twice will no longer result
     in a general system lockup.

   * The double-buffered I/O routines now let you configure the buffer
     size to use. The memory allocation also is a lot more `forgiving'
     than it used to be: if necessary it will shrink the buffer size
     until it can allocate enough space.

   * To keep naughty applications from switching the cursor key and
     numeric keymap into applications mode you can lock both key sets
     now, so they will not to change their current modes.

   * The old AmigaGuide release (v34 to be accurate) is supported now,
     but with limited functionality. The help text is not context
     sensitive and you need to shut down the AmigaGuide server manually
     (by closing the AmigaGuide window) if the screen its window
     resides upon is to be closed.

   * `RING' and `CONNECT' messages from the modem are now reported
     along with the time when they came in.

   * The program now complains loudly about outdated catalog files and
     incorrectly installed locale.library.

   * The hotkey settings panel now checks each hotkey description text
     after it is entered and complains if it is unuseable.

   * The `QUIET' command line option (makes `term' start up iconified)
     no longer crashes if Workbench isn't running.

   * The program now features an all-new user interface.

   * There is a new command line option called `BEHIND' which causes
     the main screen to stay in the background and the main window not
     to become active upon startup.

   * If `term' fails to open a screen and finds out that the requested
     screen display mode is unavailable it will copy the screen mode
     the default public screen is in and retry.

   * No more trouble with mixed-case device and library names.  As you
     pick them from the list the files are validated, i.e.  `term'
     tries to load the file in question and hunts for the
     library/device resident tag included. If the tag is found the
     `real' device/library name is copied from it, replacing the
     original name the file was opened with. This means that you can
     select `XPRZModem.Library' using the file requester and `term'
     will look into the file to find out that the library wants to be
     opened under the name of `xprzmodem.library'.  Also included are a
     type check (i.e. if a library is to be opened only files with a
     library type resident tag are included in the list) and a brief
     name comparison (i.e. only name case differences are allowed, so
     `XPRZModem.Library' = `xprzmodem.library', but `foo.device' !=
     `bar.device').

   * The external emulation and the external protocol support routines
     no longer share the same code and the same set of error
     messages/options texts.

   * A transfer protocol such as xprkermit.library will no longer leave
     `term' in a `half-dead' state if it opens a new window in the
     protocol setup phase. In previous releases this window was never
     closed.

   * The label text of XPR/XEM command options which accept a parameter
     and thus cause the settings window to be closed after text is
     entered is now drawn in the current highlight colour. This helps
     to distinguish regular string gadgets and command option
     parameters.

   * If `term' fails to set up the XPR protocol properly, i.e.  the
     setup routine does not flag success, the library is closed right
     away. This is how it has always been in previous `term' releases.
     But this time the main menu is also updated to keep you from
     starting a file transfer or changing the transfer options while
     the library base pointer is invalid.

   * In order to support external protocols which write data to or read
     data from the serial line serial I/O processing is temporarily
     disabled while the corresponding setup routines are running.
     Although this behaviour isn't quite that nice it should avoid
     serious trouble with xprkermit.library which could otherwise
     disrupt the serial device request queue.

   * There are now three buttons in the file transfer panel which
     correspond to different abort levels:

     * Skip current file   Skips just the file currently being in
     transfer (level 2)

     * Stop transfer batch   Cancels the entire batch transfer (level 1)

     * Stop entire transfer   Emergency stop (level -1)

     These abort levels are supported by xprkermit.library and a number
     of other file transfer protocols.

   * Opening the transfer protocol settings editor will cause the
     currently selected default XPR protocol to be reopened in case it
     is not open yet.

   * Holding down the control key and clicking with the mouse on a
     space character will now correctly send it.

   * Double-clicking on a phonebook entry will no longer start dialing
     if the program is still online, i.e. if the regular `Dial' button
     is disabled.

   * If the line is hung up or the carrier is lost the call log file
     (human readable, not the one that is intended for postprocessing
     using call log analyzers) will include the costs for the call. In
     previous releases `term' would only look for the `NO CARRIER'
     message.

   * The destructive backspace option now removes the character to the
     left of the cursor but does not move the rest of the line one step
     to the left. This makes the terminal emulation behaviour more
     consistent with how real video terminals handle this job.

   * The translation table settings panel now features a `Default'
     button which resets the current translation settings to defaults.

   * Just like the text buffer screen the review buffer window is
     handled by a coprocess now.

   * The packet window now supports function keys.

   * For technical reasons I dropped the string gadget clipboard
     support. I suggest that you use StringClip or a similar program
     instead.

   * Clipboard pasting from the review buffer window no longer requires
     that you activate the main window.

   * In the phonebook the edit list (right hand side listview display)
     indicates whether an entry uses default settings or whether it
     actually uses custom settings. Custom settings are indicated by
     asterisks (`*').

   * The packet window now uses the current terminal text font.

   * Pressing Amiga+- in the packet window no longer transmits the
     current string but changes to the main window while leaving the
     current string intact.

   * Fixed a potential bug in the generic list management module.

   * With some file requester patches installed, such as old ReqTools
     or MFR, the file requester code could fail to notice if a single
     file was selected in multiselect mode.

   * The phone rates are now reported according to the current locale
     settings, i.e. they take the grouping and special attributes of
     the local currency into account.

   * The IFF-8SVX sound file player code now handles stereo and
     compressed sound files gracefully (all flavours including
     uncompressed stereo, compressed stereo, uncompressed mono and
     compressed mono).

   * The ARexx `WAIT' command could fail to report how many characters
     it pulled from the data stream when a matching string was found.
     This could result in random characters showing up in the terminal
     text output.

   * The routine to attach the wait mouse pointer to windows and to
     block input to them was easily losing track of its nesting count.
     In theory the nesting count could have wrapped around, locking you
     out. The harmless side-effect was that sometimes windows would not
     get blocked.

   * The ARexx `WAIT' command argument and the wait list may include
     control sequences now. These are expanded as soon as they go into
     the list. This feature makes it possible to wait for sequences
     such as `login:\rpassword\r' but will return result strings which
     include control characters, so watch out!

   * The ARexx `READ' command now allows you to combine the `CR' and
     `NUM' options. Also, the maximum number of characters to read with
     the `CR' option is no longer limited to 255 characters.

   * The file transfer window will at startup display the name of the
     currently selected transfer protocol. It displays a default value,
     leaving the protocol identification to the XPR library.

   * The ARexx `GETATTR' command would run into serious trouble if told
     to put information into a stem variable. The result would be
     Enforcer hits or crashes.

   * If you put `term' into iconified state and press the hotkey
     combination to bring its screen to the front you will no longer
     get an Enforcer hit. Instead `term' will exit its iconified state
     and return to normal action.

   * The status line display now coexists much nicer with MagicMenu and
     the like.

   * The status line no longer displays what text mode the terminal
     window is in (this was rather a silly feature) but rather if the
     text buffer is currently recording or if it's frozen.

   * The status line looks a bit different now (there is a proper
     separation bar now instead of the hair line).

   * Just like the v3.0 preferences palette editor `term' now permits
     to select the screen rendering pens. This will *not* work under
     v2.04 since gadtools.library v37 cannot handle it (actually it
     can, but the default glyphs do not support it). This feature
     permits you to change the screen colours while you can still keep
     the window new look.

   * The ARexx `READ' command could return random characters since the
     return buffer was not set up correctly.

   * Both the ARexx `READ' and `WAIT' commands now allow you type text
     on the local console and have it sent across the line. As for the
     `WAIT' command this is of great help if the script `hangs'. Note:
     halting scripts and and such still requires pressing the `Shift +
     Shift + Esc' key combination.

   * The ARexx `READ' command would, if used with the `NUM' option,
     always return a NULL-terminated string, no matter what kind of
     data came in. It now returns the entire amount of data
     transferred, including NULL-bytes.

   * The phonebook list now clearly shows which entries are selected
     for dialing and which are not (it flips the background and text
     colours). Note: this works only with Kickstart 3.0 and above.

   * I increased the possible number of dial retries in the modem panel
     to 1000. In addition to that you can set the number of dial
     retries to `unlimited' now.

   * For those nasty MS-DOS based file transfer protocols which choke on
     file names longer than 12 characters (eight for the name, one for
     the dot, three for the extension) the file transfer options now
     permit to have filenames shrunken before they are handed to the
     transfer protocol. Internally, the XPR interface will still refer
     to the file under its original name. The routine responsible for
     shrinking the file names also takes care of the extension
     separator dot. If there is more than one dot in the file name all
     the others get replaced by underscore characters. Also, if there
     is no dot extension it will be added.

   * The packet window is handled by a coprocess now.

   * If you're bold and daring you can make `term' handle the terminal
     output on the schedule of a terminal emulation task.  Please note
     that this requires additional memory and will slow down the
     emulation if your memory is fragmented. But on the other hand the
     coprocess will stop serial input getting munged before it arrives
     in the terminal emulation output buffer. Such things can happen
     with systems which experience heavy DMA bus or task loading

   * Turning on the `faster layout feature' no longer drops the screen
     & window newlook.

   * Due to an oversight the terminal emulation process could get
     enabled even when using an external emulation, this has been fixed.

   * The ARexx command `SENDFILE' would never remove the names of files
     transferred from the upload list.

   * Yet another new option: by default the dialer sends a `\r' string
     when skipping an entry and when hanging up the line. You can
     change this behaviour via the `Dialer abort hangs up' option now.
     If enabled the dialer will go through the routine hang up
     procedure (dropping the DTR signal, sending the hangup string, you
     name it). This should convince even the most stubborn modems to
     stop doing what they are currently thinking to be fun and to
     return to normal operation.

   * Clicking on the main window in order to activate it will no longer
     trigger the character snapping function.

   * Rewrote the ARexx `WAIT' routine to a great deal. It could easily
     forget to turn serial input processing back on for the main
     program. After a script would exit you would get stuck with data
     coming in from the serial line, but none of it would be displayed
     or worked upon.

   * Clicking on the text buffer screen window in order to activate it
     will no longer trigger the character snapping function. Since
     there is no safety catch, i.e. the clipboard contents are
     immediately replaced by what you selected after you let go of the
     mouse button, this will reduce the chance of losing your current
     clipboard contents.

   * Subtle change in the dialer procedure: if an entry would use the
     default serial settings they did not replace the current serial
     settings, even if the previous dial list entry had altered them.
     However, the original purpose of the default settings was to use
     the unmodified global settings. The dialer behaviour now respects
     this, changing the current serial settings back to the global
     settings, not keeping the changes the previous dial list entry had
     made.

   * In previous program releases trying to make certain phonebook
     entries not use the default settings was somewhat difficult: you
     had to change the corresponding settings entries to something
     different from the global defaults. Things are much easier now,
     just open the settings editor and click on the `Use' button.

   * The `Startup/Login macro' has been split into a startup macro and a
     login macro. The dialing routine will first invoke the login macro
     and then the startup macro. Only the dialing routine makes use of
     the login macro.

   * Small cosmetic changes to the user interface code: cycle gadgets
     are a few pixels wider now in order to keep `CycleToMenu' happy.

   * When hanging up the line the logoff macro was never executed.

   * Finally discovered why the serial read quantum and all the
     scheduled events were never processed again once they reported
     that no further data was available. Now the event response loop
     updates the signal mask again when it reaches the bottom of the
     loop to see if any new data came in.

   * You can now configure the screen depth, permitting to use the
     Picasso II chunky display mode with `term'. Note: asl.library
     v38-v40 fails to handle nonstandard background pen colours
     correctly, i.e. the depth slider text may be illegible.

   * External emulation libraries, namely xemvt340.library, should work
     again. I changed the memory allocation call for the XEM support
     interface, but I have no idea why it did the trick.

   * The status window is handled by a coprocess now.

   * Some ARexx interface commands now run asynchronously.

   * Yet another visual gimmick (sorry, couldn't resist): menu
     checkmarks and Amiga keys are now scaled according to the current
     screen display ratio. Note: not really compatible with utilities
     such as MagicMenu or Silicon Menus. Although the programs will run
     the menu layout may look odd.

   * The phonebook list can be scrolled with cursor keys now. You also
     get a visual feedback if running under Kickstart 3.x.

   * Fixed a nasty bug in the user interface code to pick the gadget
     shortcuts: it would prefer to pick the last letter of gadget
     labels and ignore any preceding letters.

   * Scrolling lists such as the phonebook list will size-adapt to the
     screen `real estate' available.

   * The screen settings now give you full access over display overscan
     mode and screen dimensions. Note that asl.library v38 or higher is
     required to use these features.

   * Changed the cursor key control in listviews, making it possible to
     use the Shift/Alt/Control qualifier keys in Style Guide compatible
     fashion.

   * Rewrote certain dos.library related parts of the user interface
     code, permitting plain tasks to call the routines. Consequently, a
     number of coprocess-driven routines was rewritten to run on the
     schedule of a task. Note: this may conflict with the ChangeScreen
     utility included in the Picasso II distribution.

   * Old style XPR settings entered using the old style prefs interface
     (i.e. those that would pop up a text entry requester) were never
     saved.

   * The transfer library selection panel now allows you change the
     settings of all selected protocols, you no longer need to select
     all individual protocols as the default protocol and invoke the
     `Protocol settings...' menu function on them.

   * The text and review buffer search requesters maintain backlogs of
     the previous search patterns now (use the cursor keys to scroll
     through the patterns). Use the capture settings to change the
     number of patterns to keep.

   * The text buffer search function no longer enforces a
     case-insensitive search.

   * Most time and date displays now use the current locale settings.
     It did not make sense to make all such displays use this text
     formatting scheme. All remaining displays will use the common dos
     date/time formatting parameters.

   * Modified OwnDevUnit.library support: if another task wants to gain
     access to the locked device `term' will release it unless the
     modem is still online. The device is released by calling the
     `Release serial device...' menu entry.

   * Oops... the XPR options editing code did not flag changes in
     numeric arguments to the main program. Also, old style XPR options
     were always reported as `changed'.

   * Not all memory allocations went through memory pools, this has
     been fixed.

   * The `Printer control enabled' switch was omitted from the
     emulation panel, sorry about that.

   * Some windows would not be moved into the foreground when opened,
     so you had to play `hide and seek' to see on which screen they
     appeared.

   * With display aspect ratios that aren't even remotely square
     incrementer arrows for integer gadgets are no longer larger than
     their container boxes.

   * The program no longer crashes if the XPR protocol feels about
     displaying a message before any other window is open.

   * By public demand the highlighting scheme in the phonebook window
     was changed to yield better contrast.

   * The speech volume is given in percent now, but the ARexx interface
     `GETATTR' command did not reflect this.

   * The sound settings now sport a volume slider which affects all
     sounds played. Suppose a sound is to be played at maximum volume,
     i.e. 64 for the current Amiga hardware and the volume slider is set
     to 25%, then the sound will be played at volume level 16. Setting
     the volume slider to 0 will cause `term' not to produce any sound.

   * The transfer panel message list dimensions are now auto-adjusted
     to the screen size. The layout code also tries hard not to make the
     window overlap the status line.

   * Added some bells & whistles to the phonebook window. I hope it
     still works.

   * Moved the user interface code into a shared library in order to
     make things more complicated.

   * The OwnDevUnit feature is no longer linked to the `Shared access'
     option.

   * All sounds are now replayed in the same fashion as the bell sound,
     i.e. if a sound is currently being played a request to play
     another sound will not be satisfied.

   * Important file transfer notification messages are now printed in
     the current highlight colour.

   * The destructive backspace mode now offers three choices: off,
     overstrike and shift. Overstrike mode clears the character below
     the cursor and shift mode will shift the line contents to follow
     the cursor to the left.

   * The screen panel now features some more options which permit to
     open the main window on a custom screen as though it were a public
     screen and an option to split the status line from the main window.

   * Tried to squeeze some space out of the control panels with mixed
     results.

   * The text buffer screen no longer uses the main screen display mode
     by default, it is possible to select the display mode now.

   * The built-in ASCII file transfer routines no longer draw upon the
     current clipboard settings to determine how to send and receive
     text. There is an all-new preferences editor for this purpose now.

   * Added an upload list editor, permitting to collect the files to be
     transmitted in a list before the transfer is started.  You can
     enter the file names, drop icons on the editor window or on the
     AppIcon. When you are finished, just press the upload button.

   * The packet window string gadget now has room for more than 1000
     characters. Note: the `Load history' command only supports 255
     characters per line.

   * Added a prescroll option to the emulation settings. The system is
     not very smart but should get the job done rather quickly; if the
     cursor is positioned on the last terminal line the number of line
     feeds in the input data stream is counted. The number of line
     feeds or the max.prescroll number (whatever is smaller) will
     determine how many lines to scroll the screen contents up.

   * With an empty phonebook loading a new phonebook file would not
     enable the phonebook list, this has been fixed.

   * Added another option to complement the prescroll settings. Testing
     revealed that the conditions leading to the prescroll feature to
     be used were met only rarely. The `max. jump' option will give you
     roughly the same functionality as the `max. prescroll' option, the
     difference is in the handling of the input data stream: the
     prescroll option counts the number of line feeds, the jump option
     only looks for a single line feed and then scrolls up the screen
     the given number of lines.

   * The program now remembers the window position and size before going
     into iconified state. When the window is reopened it will reappear
     at the position and in the size remembered

   * The ARexx `ADDITEM' command supports a new keyword `RESPONSE' to be
     used for entries added to the wait list. Suppose you want all
     `More (Y/n)?' prompts of the BBS login procedure to be skipped
     during your auto-login script. Then you would call `ADDITEM TO
     wait NAME "More (Y/n)?" RESPONSE "\r"', add the other keywords you
     would want to wait for and then finally call `WAIT'. Whenever the
     `More (Y/n)' prompt shows up the `WAIT' command will all by itself
     send the `\r' string (or in other words, the carriage return
     character) without exiting until the login string it was watching
     for is found. Please note that this feature only makes sense with
     the wait list but not with the `WAIT' command itself.

   * Added login learn mode controls. If the option is enabled in the
     dial panel incoming text and your responses to it will be recorded.
     When you are finished with your usual login procedure, call the
     `Record script' menu item in order to save the recorded data to an
     ARexx script. By default the recorder only watches for single
     keystrokes.  If you wish to enter an entire line use the `Record
     line' menu entry, calling this item a second time will transfer
     the line you entered into the recording buffer. Pressing the
     return key has the same effect. Pressing Shift+Return will also
     put you into line recording mode, no need to use the cryptic menu
     shortcut. Note: the `term' main menu now uses all available
     printable 7-bit ASCII characters for keyboard shortcuts :-(

   * Reworked the error reporting scheme, one of the weak spots of
     `term'. In previous releases you would be told that a file could
     not be saved or loaded, but no explanation would be given why the
     action failed. Where possible `term' will now tell you the cause
     of the error.

   * The printer support code was not particularly sensible to printer
     trouble, such as reported by the infamous printer.device requester.
     Even if this requester was cancelled `term' would happily continue
     to print, causing the printer trouble requester to pop up over and
     over again. This has been fixed.

   * The ARexx `DIAL' command is no longer synchronous by default,
     there is a new `SYNC' option which causes the ARexx script to wait
     until the dialer has made a connection/has failed to make a
     connection. The `RC' (result code variable) will be set to 5 if no
     connection was made, it will be 0 if a connection was made.  Now
     control can pass right through the `DIAL' command.

   * ARexx support is no longer a compile-time option but an integral
     part of the program.

   * Fixed a couple of bugs in the user interface library which dealt
     with odd alignment of slider level strings under v39. Some few
     strings still break the rules, but the results are less devastating
     than they used to be. Thankfully, most of the gadtools.library bugs
     that caused such trouble were fixed in v40.

   * Added the `trap' feature which implements the functionality of the
     ARexx wait list in an asynchronous fashion. For each sequence
     found a command sequence is executed. This should make it much
     easier to write UUCP scripts, BBS programs and such. Please note
     that the trap list is not identical to the wait list.

   * Rewrote the ARexx/AmigaDOS command execution routines which now
     execute their commands in truly asynchronous fashion, i.e. once
     their processes are spawned they keep to themselves and notify the
     main program when they are finished. This made it possible to
     remove the odd command handling workarounds and the special ARexx
     interface code that would take care of ARexx/AmigaDOS command
     execution.

   * The upload queue window code did not get the upload buttons
     enabled if icons were dropped on it.

   * The trap list loading code mixed up the order of commands and
     sequences, this has been fixed.

   * Fixed a monetary quantity formatting bug in the locale support
     code.

   * A malformed text formatting string was causing Enforcer hits in
     the action logging routine.

   * Added a few more `safety catches' to the screen opening code in
     order to make sure it does not open screens `too deep'.

   * Changing the screen size in the screen panel did not cause the
     screen to be reopened, this has been fixed.

   * Realized that it was not such a good idea to make most windows
     simple refresh and changed them to smart refresh. I've probably
     seen too many Macintosh programs forced to redraw their window
     contents over and over again.

   * The auto-upload panel now sports a button labeled `Upload from
     queue' which if enabled will cause the current upload queue to be
     transferred. Thanks to Bob Maple for pointing me into the right
     direction.

   * Fixed a truly nasty bug in the user interface code: integer type
     gadgets did not remember their original values when created, they
     would forget about them when queried and only would report them
     correctly when the values were changed. There is something I forgot
     to mention: integer gadgets understand hexadecimal (both 0x.. and
     $.. notation), binary (%..) and octal (&..) notation. The idea
     came from Martin Taillefer.

   * The date and time entries in log files are now printed in DOS
     format again.

   * Recorded scripts and such no longer include `\*SP' codes instead
     of plain spaces. This should improve readability.

   * With the `shared screen' feature enabled `term' would not respect
     the screen depth settings. This has been fixed.

   * The XPR routines no longer queue more than one IORequest, this
     should help to avoid trouble with some few device drivers.

   * The ARexx `QUIT' command really works now.

   * Removed the fixed-width font dependencies for Kickstart 2.04.
     Although windows may look funny if you use a proportional-spaced
     font, the program should deliver the same functionality as if it
     were using a fixed-width font.

   * Triggering the iconification function with the `Release serial
     device when iconified' option enabled will ask you for
     confirmation if the modem is still online.

   * Just for the fun of it added datatypes support. The IFF-ILBM saving
     routines of picture.datatype are used when saving the window
     contents to a file.

   * If the console output window specifier includes the `%s' string
     formatting parameter it will be replaced with the name of the
     public screen `term' resides upon.

   * New ARexx command `PROCESSIO' permits to turn off serial I/O
     processing by the main program. This will let ARexx programs
     receive & process all incoming data, without having `term' pull
     single strings from the input data stream.

   * Keymap strings to include null-bytes should be properly processed
     now, previous `term' releases would stop at the null-bytes and
     ignore the rest of the input lines.

   * Changes in the serial buffer size now cause the serial driver data
     to be updated as well.

   * Added facilities for external programs to rendezvous with `term',
     allowing them to take over the serial driver. This was added
     primarily to support my HydraCom Amiga port (please note that you
     need revision 2 of my HydraCom port to interface to `term'), but
     it may also help to support other file transfer protocols, such as
     the original rz/sz programs.

   * Whether trap list processing is enabled or not is now saved along
     with the trap list itself.

   * You can now lock the cursor keys and the numeric keypad separately.

Changes introduced with v3.4:
*****************************

   * Raised the maximum number of quick dial menu entries to 50.

   * Fixed a small bug connected with the text display screen.

   * XPR protocols which do not support batch transfers now work again
     as they did in v2.4.

   * Corrected a spelling mistake in the call logfile creation routine.

   * Fixed a memory allocation error in the review buffer code.

   * Fixed a major bug in the file transfer routines. In previous
     releases (say 3.1 and above) `term' used to throw invalid file
     locks around (seems I will have to use less ambiguous identifier
     names in the future...).

   * Fixed an Enforcer hit in the quick-dial menu creation.

   * Rarely, the program could fail to rebuild the quick-dial menu
     after leaving the phonebook.

   * As required by the specs, the XPR interface now switches baud
     rates and serial parameters.

   * Enhanced the capture functions.

   * Changed the user interface layout for some windows, such as the
     modem settings window.

   * When running on a public screen will no longer cause lockups and
     trouble with Workbench. Rendering errors are still possible.

   * The very first characters to follow a modem connect message are no
     longer quietly discarded.

   * Finally solved the truly mysterious case of the missing screen
     line.

   * Fixed yet another Enforcer hit in the packet window code.

   * The standard beep routine would not work.

   * Libraries and devices can now be selected using simple menus
     rather than the file requester.

   * The program now flushes capture files to disk every minute in
     order to insure that at least fragments of the captured session
     will be safe when disaster strikes.

   * Finally got the cross-hatch pattern to draw ghosted list views
     right.

   * The terminal hex mode would write too many bytes per line.

   * The program would not pay attention to any icon tool type settings.

   * Upon making a connection the dialing routine will no longer drop
     the line by accident.

   * The review buffer window will filter out unprintable characters
     before displaying text lines.

   * The program no longer knocks itself out if an initialization error
     occurs during the startup phase.

   * You can now select the name of the public screen the `term' window
     is to be opened upon using a menu.

   * If using a public screen the program will make use of the
     corresponding screen font and no longer try to modify it in any
     weird way.

   * The ARexx command `READ' did not pay attention to the translation
     table settings.

   * A configuration file to be loaded upon startup as specified using
     tooltypes or command line options will no longer be ignored.

   * The positions and sizes of certain program windows will be stored
     in the main configuration file.

   * Initially, when a file was received the information window would
     not display the space left on the output device.

   * Introduced the `time to connect' interval.

   * Added the serial read quantum.

   * The phonebook window will now be opened large enough to hold all
     its gadgets inside.

   * Blinking text display is no longer restricted to eight colour
     screens, provided the display architecture permits high-resolution
     screens in more than 4 bit planes.

   * The program now exists cleanly if vital resources such as the
     output screen cannot be opened.

   * The file transfer routines should run a tiny little bit faster now.

   * Added the transfer performance meter.

   * The clear screen control sequence now optionally resets the cursor
     position.

   * Rarely, the text buffer screen would not update the first text
     line properly. Also, the screen display mode will no longer fall
     back to HIRES/HIRES_INTERLACED.

   * Rarely, the review buffer window would render text in the wrong
     colours.

   * The pen/palette sharing code was submitting incorrect colour codes.

   * The review buffer window now responds to the same keypresses as
     the text buffer screen and the main input window.

   * Not all packet menu items were to be invoked using menu shortcuts.

   * Added `Completion time' display to the transfer progress window.

   * Introduced special transfer library settings. You can now select
     which library to use for ASCII, text or binary transfers.

   * Added built-in ASCII transfer routines.

   * You can now search forwards or backwards through the text buffer.

   * Text stored in the buffer no longer gets trailing spaces stripped
     in order to keep weird uuencoded data intact.

   * The menu items featured in the `Edit' menu now properly reflect
     the state of the clipboard.

   * A menu shortcut would be used twice in the main window menus.

   * Rarely, the colour choices for the bar charts in the transfer
     progress window would be wrong.

   * The quick dial menu would not be rebuilt if the phonebook was
     sorted or new entries were added.

   * The ARexx commands `DELAY' and `SEND' would not turn off the text
     cursor prior to text processing.

   * Unless it is absolutely necessary, the text display scope is no
     longer moved automatically.

   * As for the text display screen and window the `Alt' keys now have
     the same effect as the `Control' key.

   * If new text is added to the text buffer the buffer screen and the
     review window are properly updated now.

   * A dialing list built using the quick dial menu was not enumerated
     properly.

   * Building a dialing list using the quick dial menu via extended
     selection, then selecting the phonebook control panel, clearing
     the dialing list and leaving the phonebook will no longer start
     dialing the list just cleared.

   * Checkmarks now indicate which entries in the quick dial menu are to
     be dialed.

   * The bar charts displayed in the transfer progress window are now
     updated in a more efficient manner (the text colour has changed,
     too).  Also, unzooming the window will properly update the bar
     charts now.

   * A hardware buffer overrun error is no longer considered a fatal
     error.

   * With some requesters and windows string gadgets are auto-activated
     now. Pressing the `Return' key will cycle through all the available
     strings gadgets, holding down either `Shift' key will break the
     cycle.

   * Trying to quit the program will no longer ask for confirmation if
     there is no reasons to ask for.

   * The bar charts in the transfer progress window will be omitted if
     the remaining screen space would not permit the entire window to be
     displayed.

   * The fast! macro window contents would be rendered in the wrong
     colours.

   * The phonebook window did not support any online-help features.

Changes introduced with v3.3:
*****************************

   * Added the quick dialing menu.

   * Enhanced the modem and screen settings

   * Fixed a few bugs in the ARexx interface commands `REQUESTFILE' and
     `REQUESTRESPONSE'

   * Unfortunately a single line was missing in the XPR option setup,
     causing them program not to save the transfer protocol options.

   * No longer forces the creation date of an auto-capture file to be
     included in the file. As an option, will use the naming convention
     used in previous program releases.

   * The program now optionally creates icons for files.

   * Added a terminal hex-mode for debugging purposes

   * Fonts are now opened using properly initialized DPI and aspect
     ratio values which results in much better scaled outline font
     rendering.

   * The name of an external emulation library is no longer quietly
     suppressed.

   * It is possible to disable the double-buffered file management
     routines now.

   * Added the text pacing option.

   * Apparently, external and internal terminal emulations tried to
     turn on/off each other's cursors.

   * Copying text to the clipboard now permits to append the text to
     the current clipboard contents.

Changes introduced with v3.2:
*****************************

   * Could not enter phonebook passwords

   * The XPR interface now states much more clearly what the likely
     cause of a serial I/O error might have been

   * New sound support functions added

   * Added `OK' and `ERROR' modem response codes

   * The order of messages displayed in the file transfer window has
     changed (now works top down rather than bottom up).

   * The ARexx interface routines did not check whether the serial
     device handles were available or not (boom!)

   * Redid the fast! macro handling

   * The text buffer screen did not notice when the buffer contents
     were cleared

   * Retuned the phonebook and dial list routines which could generate
     Enforcer hits and trash innocent memory

   * Boldface/italics characters will no longer leak into the window
     borders

   * The cursor image now reflects the state of the terminal window

   * The program would generate an Enforcer hit when files were to be
     transferred by dropping their icons on the main window

   * When opening a capture file the program could ask twice whether an
     already existing file should be replaced.

   * Paste operations triggered from the review buffer window would not
     start any paste operation until the main window was reselected

   * Reworked the character translation table format.  Translation
     table files should be smaller now and should load a lot faster

   * The screen/output window size now changes to the number of columns
     specified in the terminal settings

   * Rarely, the file transfer window would be opened very narrow and
     tall.  So tall in fact that display elements would overlap each
     other, no text could be displayed in the big listview and Enforcer
     hits were not to be avoided.

   * The file transfer interface would produce Enforcer hits when to
     transfer files using an old-style XPR library.

   * The phonebook dial list handling would select single entries when
     a shift key was pressed during keyboard selection.

   * The review buffer window no longer loses track of the text area it
     ought to display after resizing the window.

   * Rewrote much of the keyboard/mouse/peanut butter handling loop.
     No longer quite so complex.

   * Thanks to user persistence the `Password' text entry field
     available through the password/user panel no longer hides the
     actual password text.

   * `Hang up' menu item did not cause a backed-up configuration to be
     restored.

   * Naughty XPR protocols which would issue error reports through
     xpr_update() during XPRSetup() would cause the transfer window to
     be opened not to close afterwards.

   * No more odd happenings in the status line online time display.
     The code responsible would misinterprete a string index.  This has
     been fixed.

   * It is no longer possible to dial phonebook entries which have no
     name or phone number attached.

   * The terminal emulation code no longer leaves background colour
     artifacts when scrolling text with a background colour other than
     the default background colour enabled.

   * Calls to BeginIO() rather than SendIO() were giving some - if not
     most - device drivers hard times.  According to the few tests I
     have run so far the program now performs more reliable when doing
     file transfers.  `term' now works again in conjunction with
     isdn.device.

   * The program no longer encodes the creation date into the name of an
     auto-capture file but rather writes creation time and date to the
     first new line in the file.

   * New tooltype/command line option `Quiet' will cause `term' to
     start up iconified.

Changes introduced with v3.1:
*****************************

   * Previous releases of the phonebook would not clone single phonebook
     entries correctly.

   * The configuration copying routine will now selectively copy config
     information to the currently selected phonebook entries.

   * The phonebook encryption/decryption routines are a tad faster now.

   * The program will now prompt twice for a phonebook access password.

   * Comment, phone number, user name and password can be much longer
     now than they used to be in previous releases.

   * The phonebook now only contains the configuration information to
     differ from the global configuration.

   * Previous releases would not save any rate information along with
     encrypted phonebook files, this has been fixed.

   * The configuration copying routine now allows to `drop' parts of
     the phone book configuration rather than replacing them with parts
     of the global configuration.  This feature works in conjunction
     with the new phonebook file format.

   * A new feature has been added:  as an option, the program will
     immediately start to redial the currently configured dialing list
     as soon as the line is hung up or the carrier is lost.

   * The program finally includes context-sensitive online help
     implemented through amigaguide.library (note:  Kickstart 3.0
     required).  Any window to offer a help text will display it when
     the `Help' key is pressed.

   * The ARexx interface documentation was entirely rewritten.  The
     main program documentation was updated and slightly enhanced.  Be
     sure to reread it!

   * Both the text buffer screen and review buffer window now feature
     new and improved scrollers.  Scrolling and screen refreshes are
     also quite a bit faster now.

   * The text searching routine has been enhanced and now works much
     faster than in previous releases.  It also happens to find
     multiple occurences of a string in a single line.

   * Improved text buffer handling, reduced memory fragmentation if
     running under control of Kickstart 3.0.

   * The text buffer will no longer quietly swallow single characters
     and will finally correctly wrap lines longer than 80 characters.

   * The review buffer window now also sports a search function just
     like the text buffer screen, other useful menu items have been
     added as well.

   * In previous releases the program would miscalculate the number of
     bytes left on a filing device when receiving a file.  It would not
     take the number of bytes received into account, this has been
     fixed.

   * In order to transfer files one can simply drag the corresponding
     icons on the `term' main window (requires that the `term' window
     is opened on the Workbench screen).

   * Instead of identifying the type of a file received, the program
     will optionally attach a file comment to show the name of the BBS
     the file was received from and the time and date when the file was
     received.

   * In case a file transfer is terminated due to errors the file
     transfer window will remain open until explicitely closed.

   * The XPR interface will disable the xpr_unlink() routine if the
     `override transfer path' option is in effect.

   * The XPR interface will no longer sort files to be uploaded by size
     and name as most users found this feature annoying.  It now sorts
     the files by name.

   * The file transfer window now correctly displays the names of all
     files sent and received.

   * The file transfer server was removed as it would not lead to a
     performance gain but a performance loss.

   * `term' now finally also runs as a window on the Workbench or any
     other public screen (that's what you always wanted, right?).  If
     running under control of Kickstart 3.0 will attempt to share
     screen colours with other applications, making it possible to run
     the terminal emulation in eight or sixteen colours if enough
     shareable pens are available.

   * `term' will refuse to run on a public screen if running under
     control of Kickstart 2.x and if the screen font happens to be
     proportional-spaced.

   * Some minor and some major bugs in the built-in terminal emulation
     have been fixed.

   * The program distribution now includes the 11 point IBM.font
     donated by Bernhard F.  Muller.

   * I was surprised to discover that in previous releases the terminal
     emulation server would never get activated as the conditions it
     would be enabled would very rarely be met.  Since the file
     transfer server would actually lead to a performance loss rather
     than a performance gain I chose to remove the terminal server
     along with it.  Both may be implemented in a future release.

   * The terminal emulation should work a tad faster now.

   * The program now requires diskfont.library to be installed in order
     to work correctly.

   * The program will ask for a confirmation prior to resetting the
     serial device driver while the program is still online.  Most
     seasoned JR-Comm had trouble to adjust to the fact that the
     JR-Comm command `send password' would use the same menu shortcut
     as the `term'?`release serial device' command.

   * The name of the call log file can now be configured completely.
     Previous releases would use the call file path and use the name
     `term-call.log'.

   * The status window now displays the name of the ARexx host port,
     the BBS name, phone number, comment and current user name.

   * In order to confuse and annoy you, the menu layout has been
     changed once again.

   * A new feature has been added:  the `wait' menu item will
     repeatedly send the sequence <Space><Backspace> in order to
     simulate terminal input.

   * The program now requires a bit more memory than before (program
     size has climbed by about 50 KBytes).

   * New command line options and tool types have been added, some have
     been renamed.

   * The program is now much smarter in determining the sizes of the
     phonebook and file transfer window.

   * The lists used by the phonebook and the date panel no longer look
     quite so weird if using a proportional-spaced font.

   * The main screen text snipping scheme has changed a bit and now
     resembles the standard console device snipping.  Also supported is
     double-clicking on single words in order to snip them.

   * The ARexx interface has been entirely rewritten from scratch.